| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 13 Jun 2017 03:27:18 +0000
From: "A.s. Dong" <aisheng.dong@....com>
To: Andy Duan <fugang.duan@....com>,
"linux-serial@...r.kernel.org" <linux-serial@...r.kernel.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"jslaby@...e.com" <jslaby@...e.com>,
"stefan@...er.ch" <stefan@...er.ch>,
Mingkai Hu <mingkai.hu@....com>, "Y.b. Lu" <yangbo.lu@....com>,
"nikita.yoush@...entembedded.com" <nikita.yoush@...entembedded.com>,
"andy.shevchenko@...il.com" <andy.shevchenko@...il.com>,
"dongas86@...il.com" <dongas86@...il.com>
Subject: RE: [PATCH V3 3/7] tty: serial: lpuart: add little endian 32 bit
register support
> -----Original Message-----
> From: Andy Duan
> Sent: Tuesday, June 13, 2017 11:09 AM
> To: A.s. Dong; linux-serial@...r.kernel.org
> Cc: linux-kernel@...r.kernel.org; linux-arm-kernel@...ts.infradead.org;
> gregkh@...uxfoundation.org; jslaby@...e.com; stefan@...er.ch; Mingkai Hu;
> Y.b. Lu; nikita.yoush@...entembedded.com; andy.shevchenko@...il.com;
> dongas86@...il.com; A.s. Dong
> Subject: RE: [PATCH V3 3/7] tty: serial: lpuart: add little endian 32 bit
> register support
>
> From: Dong Aisheng <aisheng.dong@....com> Sent: Monday, June 12, 2017
> 11:37 PM
> >To: linux-serial@...r.kernel.org
> >Cc: linux-kernel@...r.kernel.org; linux-arm-kernel@...ts.infradead.org;
> >gregkh@...uxfoundation.org; jslaby@...e.com; Andy Duan
> ><fugang.duan@....com>; stefan@...er.ch; Mingkai Hu
> ><mingkai.hu@....com>; Y.b. Lu <yangbo.lu@....com>;
> >nikita.yoush@...entembedded.com; andy.shevchenko@...il.com;
> >dongas86@...il.com; A.S. Dong <aisheng.dong@....com>
> >Subject: [PATCH V3 3/7] tty: serial: lpuart: add little endian 32 bit
> >register support
> >
> >Use standard port->iotype to distinguish endian difference. Note as we
> >read/write register by checking iotype dynamically, we need to
> >initialize the iotype correctly for earlycon as well to avoid a break.
> >
> >Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
> >Cc: Jiri Slaby <jslaby@...e.com> (supporter:TTY LAYER)
> >Cc: Stefan Agner <stefan@...er.ch>
> >Cc: Mingkai Hu <Mingkai.Hu@....com>
> >Cc: Yangbo Lu <yangbo.lu@....com>
> >Cc: Fugang Duan <fugang.duan@....com>
> >Signed-off-by: Dong Aisheng <aisheng.dong@....com>
> >
> >ChangeLog:
> >v2->v3:
> > * Instead of using global var, use standard port->iotype to distinguish
> > endian difference.
> >v1->v2:
> > * No changes
> >---
> > drivers/tty/serial/fsl_lpuart.c | 43
> >+++++++++++++++++++++++++++----------
> >----
> > 1 file changed, 29 insertions(+), 14 deletions(-)
> >
> >diff --git a/drivers/tty/serial/fsl_lpuart.c
> >b/drivers/tty/serial/fsl_lpuart.c index
> >ed9db2f..bbf47a0 100644
> >--- a/drivers/tty/serial/fsl_lpuart.c
> >+++ b/drivers/tty/serial/fsl_lpuart.c
> >@@ -280,15 +280,29 @@ MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
> > /* Forward declare this for the dma callbacks*/ static void
> >lpuart_dma_tx_complete(void *arg);
> >
> >-static inline u32 lpuart32_read(struct uart_port *port, u32 reg_off) -{
> >- return ioread32be(port->membase + reg_off);
> >+static inline u32 lpuart32_read(struct uart_port *port, u32 off) {
> >+ switch (port->iotype) {
> >+ case UPIO_MEM32:
> >+ return readl(port->membase + off);
> >+ case UPIO_MEM32BE:
> >+ return ioread32be(port->membase + off);
> >+ default:
> >+ return 0;
> >+ };
> > }
> >
> > static inline void lpuart32_write(struct uart_port *port, u32 val,
> >- u32 reg_off)
> >+ u32 off)
> > {
> >- iowrite32be(val, port->membase + reg_off);
> >+ switch (port->iotype) {
> >+ case UPIO_MEM32:
> >+ writel(val, port->membase + off);
> >+ break;
> >+ case UPIO_MEM32BE:
> >+ iowrite32be(val, port->membase + off);
> >+ break;
> >+ };
> > }
> >
> > static void lpuart_stop_tx(struct uart_port *port) @@ -602,7 +616,7 @@
> >static irqreturn_t lpuart_txint(int irq, void *dev_id)
> >
> > spin_lock_irqsave(&sport->port.lock, flags);
> > if (sport->port.x_char) {
> >- if (sport->port.iotype & UPIO_MEM32BE)
> >+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
> > lpuart32_write(&sport->port, sport->port.x_char,
> UARTDATA);
> > else
> > writeb(sport->port.x_char, sport->port.membase + UARTDR);
> @@
> >-610,14 +624,14 @@ static irqreturn_t lpuart_txint(int irq, void
> >*dev_id)
> > }
> >
> > if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
> >- if (sport->port.iotype & UPIO_MEM32BE)
> >+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
>
> Can use one macro instead of sport->port.iotype & (UPIO_MEM32 |
> UPIO_MEM32BE ?
>
UPIO_MEM32 and UPIO_MEM32BE are serial core definitions.
If we use one macro for it, then the macro seems be better in serial core.
But I don't think it's quite necessary.
Explicit using also make the code look clearer.
Regards
Dong Aisheng
> > lpuart32_stop_tx(&sport->port);
> > else
> > lpuart_stop_tx(&sport->port);
> > goto out;
> > }
> >
> >- if (sport->port.iotype & UPIO_MEM32BE)
> >+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
> > lpuart32_transmit_buffer(sport);
> > else
> > lpuart_transmit_buffer(sport);
> >@@ -1890,12 +1904,12 @@ static int __init lpuart_console_setup(struct
> >console *co, char *options)
> > if (options)
> > uart_parse_options(options, &baud, &parity, &bits, &flow);
> > else
> >- if (sport->port.iotype & UPIO_MEM32BE)
> >+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
> > lpuart32_console_get_options(sport, &baud, &parity,
> &bits);
> > else
> > lpuart_console_get_options(sport, &baud, &parity, &bits);
> >
> >- if (sport->port.iotype & UPIO_MEM32BE)
> >+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
> > lpuart32_setup_watermark(sport);
> > else
> > lpuart_setup_watermark(sport);
> >@@ -1954,6 +1968,7 @@ static int __init
> >lpuart32_early_console_setup(struct
> >earlycon_device *device,
> > if (!device->port.membase)
> > return -ENODEV;
> >
> >+ device->port.iotype = UPIO_MEM32BE;
> > device->con->write = lpuart32_early_write;
> > return 0;
> > }
> >@@ -2015,7 +2030,7 @@ static int lpuart_probe(struct platform_device
> *pdev)
> > }
> > sport->port.irq = ret;
> > sport->port.iotype = sdata->iotype;
> >- if (sport->port.iotype & UPIO_MEM32BE)
> >+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
> > sport->port.ops = &lpuart32_pops;
> > else
> > sport->port.ops = &lpuart_pops;
> >@@ -2042,7 +2057,7 @@ static int lpuart_probe(struct platform_device
> >*pdev)
> >
> > platform_set_drvdata(pdev, &sport->port);
> >
> >- if (sport->port.iotype & UPIO_MEM32BE)
> >+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
> > lpuart_reg.cons = LPUART32_CONSOLE;
> > else
> > lpuart_reg.cons = LPUART_CONSOLE;
> >@@ -2095,7 +2110,7 @@ static int lpuart_suspend(struct device *dev)
> > struct lpuart_port *sport = dev_get_drvdata(dev);
> > unsigned long temp;
> >
> >- if (sport->port.iotype & UPIO_MEM32BE) {
> >+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) {
> > /* disable Rx/Tx and interrupts */
> > temp = lpuart32_read(&sport->port, UARTCTRL);
> > temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE); @@ -
> 2146,7
> >+2161,7 @@ static int lpuart_resume(struct device *dev)
> > if (sport->port.suspended && !sport->port.irq_wake)
> > clk_prepare_enable(sport->clk);
> >
> >- if (sport->port.iotype & UPIO_MEM32BE) {
> >+ if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) {
> > lpuart32_setup_watermark(sport);
> > temp = lpuart32_read(&sport->port, UARTCTRL);
> > temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE |
> >--
> >2.7.4
Powered by blists - more mailing lists