lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3788bbae-c99c-b63e-8910-f98567124cac@gmail.com>
Date:   Fri, 23 Jun 2017 09:22:16 -0700
From:   Florian Fainelli <f.fainelli@...il.com>
To:     David Wu <david.wu@...k-chips.com>, davem@...emloft.net,
        heiko@...ech.de, robh+dt@...nel.org, mark.rutland@....com,
        catalin.marinas@....com, will.deacon@....com, olof@...om.net,
        linux@...linux.org.uk, arnd@...db.de
Cc:     andrew@...n.ch, peppe.cavallaro@...com, alexandre.torgue@...com,
        huangtao@...k-chips.com, hwg@...k-chips.com,
        netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-rockchip@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 05/11] net: stmmac: dwmac-rk: Add internal phy support

On 06/22/2017 09:59 PM, David Wu wrote:
> To make internal phy worked, need to configure the phy_clock,
> phy cru_reset and related registers.
> 
> Change-Id: I6971c0a769754b824b1b908b56080cbaf7867d13
> Signed-off-by: David Wu <david.wu@...k-chips.com>
> ---
>  .../devicetree/bindings/net/rockchip-dwmac.txt     |  3 +
>  drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c     | 82 ++++++++++++++++++++++
>  2 files changed, 85 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
> index 8f42755..0514f69 100644
> --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
> +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
> @@ -22,6 +22,7 @@ Required properties:
>  	   <&cru SCLK_MACREF_OUT> clock gate for RMII reference clock output
>  	   <&cru ACLK_GMAC>: AXI clock gate for GMAC
>  	   <&cru PCLK_GMAC>: APB clock gate for GMAC
> +	   <&cru MAC_PHY>: clock for internal macphy
>   - clock-names: One name for each entry in the clocks property.
>   - phy-mode: See ethernet.txt file in the same directory.
>   - pinctrl-names: Names corresponding to the numbered pinctrl states.
> @@ -35,6 +36,8 @@ Required properties:
>   - assigned-clocks: main clock, should be <&cru SCLK_MAC>;
>   - assigned-clock-parents = parent of main clock.
>     can be <&ext_gmac> or <&cru SCLK_MAC_PLL>.
> + - phy-type: For internal phy, it must be "internal"; For external phy, no need
> +   to configure this.

Use the standard "phy-mode" property. You will see
drivers/net/ethernet/broadcom/genet/ actually define a phy-mode =
"internal" property specifically for that. This should probably be
generalized so it is useful to other drivers a well, I will do just that.

>  
>  Optional properties:
>   - tx_delay: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default.
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> index a8e8fd5..c1a1413 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> @@ -41,6 +41,7 @@ struct rk_gmac_ops {
>  	void (*set_to_rmii)(struct rk_priv_data *bsp_priv);
>  	void (*set_rgmii_speed)(struct rk_priv_data *bsp_priv, int speed);
>  	void (*set_rmii_speed)(struct rk_priv_data *bsp_priv, int speed);
> +	void (*internal_phy_powerup)(struct rk_priv_data *bsp_priv);
>  };
>  
>  struct rk_priv_data {
> @@ -52,6 +53,7 @@ struct rk_priv_data {
>  
>  	bool clk_enabled;
>  	bool clock_input;
> +	bool internal_phy;
>  
>  	struct clk *clk_mac;
>  	struct clk *gmac_clkin;
> @@ -61,6 +63,9 @@ struct rk_priv_data {
>  	struct clk *clk_mac_refout;
>  	struct clk *aclk_mac;
>  	struct clk *pclk_mac;
> +	struct clk *clk_macphy;
> +
> +	struct reset_control *macphy_reset;
>  
>  	int tx_delay;
>  	int rx_delay;
> @@ -750,6 +755,48 @@ static void rk3399_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
>  	.set_rmii_speed = rk3399_set_rmii_speed,
>  };
>  
> +#define RK_GRF_MACPHY_CON0		0xb00
> +#define RK_GRF_MACPHY_CON1		0xb04
> +#define RK_GRF_MACPHY_CON2		0xb08
> +#define RK_GRF_MACPHY_CON3		0xb0c
> +
> +#define RK_MACPHY_ENABLE		GRF_BIT(0)
> +#define RK_MACPHY_DISABLE		GRF_CLR_BIT(0)
> +#define RK_MACPHY_CFG_CLK_50M		GRF_BIT(14)
> +#define RK_GMAC2PHY_RMII_MODE		(GRF_BIT(6) | GRF_CLR_BIT(7))
> +#define RK_GRF_CON2_MACPHY_ID		HIWORD_UPDATE(0x1234, 0xffff, 0)
> +#define RK_GRF_CON3_MACPHY_ID		HIWORD_UPDATE(0x35, 0x3f, 0)
> +
> +static void rk_gmac_internal_phy_powerup(struct rk_priv_data *priv)
> +{
> +	if (priv->ops->internal_phy_powerup)
> +		priv->ops->internal_phy_powerup(priv);
> +
> +	regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_CFG_CLK_50M);
> +	regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_GMAC2PHY_RMII_MODE);
> +
> +	regmap_write(priv->grf, RK_GRF_MACPHY_CON2, RK_GRF_CON2_MACPHY_ID);
> +	regmap_write(priv->grf, RK_GRF_MACPHY_CON3, RK_GRF_CON3_MACPHY_ID);
> +
> +	/* disable macphy, the default value is enabled */
> +	regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_DISABLE);
> +	if (priv->macphy_reset)
> +		reset_control_assert(priv->macphy_reset);
> +	usleep_range(10, 20);
> +	if (priv->macphy_reset)
> +		reset_control_deassert(priv->macphy_reset);
> +	usleep_range(10, 20);
> +	regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_ENABLE);
> +	msleep(30);
> +}
> +
> +static void rk_gmac_internal_phy_powerdown(struct rk_priv_data *priv)
> +{
> +	regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_DISABLE);
> +	if (priv->macphy_reset)
> +		reset_control_assert(priv->macphy_reset);
> +}
> +
>  static int gmac_clk_init(struct rk_priv_data *bsp_priv)
>  {
>  	struct device *dev = &bsp_priv->pdev->dev;
> @@ -803,6 +850,14 @@ static int gmac_clk_init(struct rk_priv_data *bsp_priv)
>  			clk_set_rate(bsp_priv->clk_mac, 50000000);
>  	}
>  
> +	if (bsp_priv->internal_phy) {
> +		bsp_priv->clk_macphy = devm_clk_get(dev, "clk_macphy");
> +		if (IS_ERR(bsp_priv->clk_macphy))
> +			dev_err(dev, "cannot get %s clock\n", "clk_macphy");
> +		else
> +			clk_set_rate(bsp_priv->clk_macphy, 50000000);
> +	}
> +
>  	return 0;
>  }
>  
> @@ -826,6 +881,9 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
>  						bsp_priv->clk_mac_refout);
>  			}
>  
> +			if (!IS_ERR(bsp_priv->clk_macphy))
> +				clk_prepare_enable(bsp_priv->clk_macphy);
> +
>  			if (!IS_ERR(bsp_priv->aclk_mac))
>  				clk_prepare_enable(bsp_priv->aclk_mac);
>  
> @@ -858,6 +916,9 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
>  						bsp_priv->clk_mac_refout);
>  			}
>  
> +			if (!IS_ERR(bsp_priv->clk_macphy))
> +				clk_disable_unprepare(bsp_priv->clk_macphy);
> +
>  			if (!IS_ERR(bsp_priv->aclk_mac))
>  				clk_disable_unprepare(bsp_priv->aclk_mac);
>  
> @@ -940,6 +1001,21 @@ static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
>  			bsp_priv->clock_input = false;
>  	}
>  
> +	ret = of_property_read_string(dev->of_node, "phy-type", &strings);
> +	if (!ret && !strcmp(strings, "internal")) {
> +		bsp_priv->internal_phy = true;
> +		bsp_priv->macphy_reset = devm_reset_control_get(dev,
> +				  "mac-phy");
> +		if (IS_ERR(bsp_priv->macphy_reset)) {
> +			dev_info(dev, "no macphy_reset control found\n");
> +			bsp_priv->macphy_reset = NULL;
> +		}
> +	} else {
> +		bsp_priv->internal_phy = false;
> +	}
> +	dev_info(dev, "internal PHY? (%s).\n",
> +		 bsp_priv->internal_phy ? "yes" : "no");
> +
>  	ret = of_property_read_u32(dev->of_node, "tx_delay", &value);
>  	if (ret) {
>  		bsp_priv->tx_delay = 0x30;
> @@ -1014,6 +1090,9 @@ static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
>  	pm_runtime_enable(dev);
>  	pm_runtime_get_sync(dev);
>  
> +	if (bsp_priv->internal_phy)
> +		rk_gmac_internal_phy_powerup(bsp_priv);
> +
>  	return 0;
>  }
>  
> @@ -1021,6 +1100,9 @@ static void rk_gmac_powerdown(struct rk_priv_data *gmac)
>  {
>  	struct device *dev = &gmac->pdev->dev;
>  
> +	if (gmac->internal_phy)
> +		rk_gmac_internal_phy_powerdown(gmac);
> +
>  	pm_runtime_put_sync(dev);
>  	pm_runtime_disable(dev);
>  
> 


-- 
Florian

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ