linux-kernel - [PATCH v2 06/10] mmc: sunxi: Add support for A83T eMMC (MMC2)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 20 Jul 2017 11:44:48 +0800
From:   Chen-Yu Tsai <wens@...e.org>
To:     Maxime Ripard <maxime.ripard@...e-electrons.com>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...eaurora.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>
Cc:     Chen-Yu Tsai <wens@...e.org>, linux-arm-kernel@...ts.infradead.org,
        linux-mmc@...r.kernel.org, linux-clk@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-sunxi@...glegroups.com
Subject: [PATCH v2 06/10] mmc: sunxi: Add support for A83T eMMC (MMC2)

The third MMC controller (MMC2) on the Allwinner A83T SoC is slightly
different. It supports a wider 8-bit bus, has a dedicated controllable
reset pin for eMMC, and a "new timing mode" which is supposed to deliver
better signals and thus better performance.

Add a compatible for this one to use the new timing mode not found in the
other controllers.

Signed-off-by: Chen-Yu Tsai <wens@...e.org>
Acked-by: Rob Herring <robh@...nel.org>
---
 Documentation/devicetree/bindings/mmc/sunxi-mmc.txt | 1 +
 drivers/mmc/host/sunxi-mmc.c                        | 8 ++++++++
 2 files changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
index 7d53a799f140..63b57e2a10fb 100644
--- a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt
@@ -12,6 +12,7 @@ Required properties:
    * "allwinner,sun4i-a10-mmc"
    * "allwinner,sun5i-a13-mmc"
    * "allwinner,sun7i-a20-mmc"
+   * "allwinner,sun8i-a83t-emmc"
    * "allwinner,sun9i-a80-mmc"
    * "allwinner,sun50i-a64-emmc"
    * "allwinner,sun50i-a64-mmc"
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index 11587a69a1fd..de187ed77040 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -1117,6 +1117,13 @@ static const struct sunxi_mmc_cfg sun7i_a20_cfg = {
 	.can_calibrate = false,
 };
 
+static const struct sunxi_mmc_cfg sun8i_a83t_emmc_cfg = {
+	.idma_des_size_bits = 16,
+	.clk_delays = sunxi_mmc_clk_delays,
+	.can_calibrate = false,
+	.has_timings_switch = true,
+};
+
 static const struct sunxi_mmc_cfg sun9i_a80_cfg = {
 	.idma_des_size_bits = 16,
 	.clk_delays = sun9i_mmc_clk_delays,
@@ -1141,6 +1148,7 @@ static const struct of_device_id sunxi_mmc_of_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-mmc", .data = &sun4i_a10_cfg },
 	{ .compatible = "allwinner,sun5i-a13-mmc", .data = &sun5i_a13_cfg },
 	{ .compatible = "allwinner,sun7i-a20-mmc", .data = &sun7i_a20_cfg },
+	{ .compatible = "allwinner,sun8i-a83t-emmc", .data = &sun8i_a83t_emmc_cfg },
 	{ .compatible = "allwinner,sun9i-a80-mmc", .data = &sun9i_a80_cfg },
 	{ .compatible = "allwinner,sun50i-a64-mmc", .data = &sun50i_a64_cfg },
 	{ .compatible = "allwinner,sun50i-a64-emmc", .data = &sun50i_a64_emmc_cfg },
-- 
2.13.2