| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 22 Jul 2017 13:47:07 +1200
From: Derek Robson <robsonde@...il.com>
To: marcel@...tmann.org, gustavo@...ovan.org, johan.hedberg@...il.com
Cc: linux-bluetooth@...r.kernel.org, linux-kernel@...r.kernel.org,
Derek Robson <robsonde@...il.com>
Subject: [PATCH] Bluetooth: Style fix - align block comments
Fixed alignment of all block comments.
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@...il.com>
---
drivers/bluetooth/ath3k.c | 3 ++-
drivers/bluetooth/bt3c_cs.c | 8 +++++---
drivers/bluetooth/btmrvl_sdio.c | 6 ++++--
drivers/bluetooth/btsdio.c | 3 ++-
drivers/bluetooth/btuart_cs.c | 8 +++++---
drivers/bluetooth/btusb.c | 15 ++++++++++-----
drivers/bluetooth/btwilink.c | 6 +++---
drivers/bluetooth/hci_ldisc.c | 3 ++-
drivers/bluetooth/hci_ll.c | 3 ++-
9 files changed, 35 insertions(+), 20 deletions(-)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index b793853ff05f..204afe66de92 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -140,7 +140,8 @@ MODULE_DEVICE_TABLE(usb, ath3k_table);
#define BTUSB_ATH3012 0x80
/* This table is to load patch and sysconfig files
- * for AR3012 */
+ * for AR3012
+ */
static const struct usb_device_id ath3k_blist_tbl[] = {
/* Atheros AR3012 with sflash firmware*/
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 32dcac017395..194788739a83 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -684,14 +684,16 @@ static int bt3c_config(struct pcmcia_device *link)
unsigned long try;
/* First pass: look for a config entry that looks normal.
- Two tries: without IO aliases, then with aliases */
+ * Two tries: without IO aliases, then with aliases
+ */
for (try = 0; try < 2; try++)
if (!pcmcia_loop_config(link, bt3c_check_config, (void *) try))
goto found_port;
/* Second pass: try to find an entry that isn't picky about
- its base address, then try to grab any standard serial port
- address, and finally try to get any free port. */
+ * its base address, then try to grab any standard serial port
+ * address, and finally try to get any free port.
+ */
if (!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL))
goto found_port;
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index eb794f08b238..03341ce98c32 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -1455,7 +1455,8 @@ static void btmrvl_sdio_dump_firmware(struct btmrvl_private *priv)
fw_dump_ptr = fw_dump_data;
/* Dump all the memory data into single file, a userspace script will
- be used to split all the memory data to multiple files*/
+ * be used to split all the memory data to multiple files
+ */
BT_INFO("== btmrvl firmware dump to /sys/class/devcoredump start");
for (idx = 0; idx < dump_num; idx++) {
struct memory_type_mapping *entry = &mem_type_mapping_tbl[idx];
@@ -1482,7 +1483,8 @@ static void btmrvl_sdio_dump_firmware(struct btmrvl_private *priv)
}
/* fw_dump_data will be free in device coredump release function
- after 5 min*/
+ * after 5 min
+ */
dev_coredumpv(&card->func->dev, fw_dump_data, fw_dump_len, GFP_KERNEL);
BT_INFO("== btmrvl firmware dump to /sys/class/devcoredump end");
}
diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c
index 1cb958e199eb..c8e945d19ffe 100644
--- a/drivers/bluetooth/btsdio.c
+++ b/drivers/bluetooth/btsdio.c
@@ -144,7 +144,8 @@ static int btsdio_rx_packet(struct btsdio_data *data)
if (!skb) {
/* Out of memory. Prepare a read retry and just
* return with the expectation that the next time
- * we're called we'll have more memory. */
+ * we're called we'll have more memory.
+ */
return -ENOMEM;
}
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 7df79bb12350..310e9c2e09b6 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -614,14 +614,16 @@ static int btuart_config(struct pcmcia_device *link)
int try;
/* First pass: look for a config entry that looks normal.
- Two tries: without IO aliases, then with aliases */
+ * Two tries: without IO aliases, then with aliases
+ */
for (try = 0; try < 2; try++)
if (!pcmcia_loop_config(link, btuart_check_config, &try))
goto found_port;
/* Second pass: try to find an entry that isn't picky about
- its base address, then try to grab any standard serial port
- address, and finally try to get any free port. */
+ * its base address, then try to grab any standard serial port
+ * address, and finally try to get any free port.
+ */
if (!pcmcia_loop_config(link, btuart_check_config_notpicky, NULL))
goto found_port;
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index fa24d693af24..6582e6df5dee 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -656,7 +656,8 @@ static void btusb_intr_complete(struct urb *urb)
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
- * -ENODEV: device got disconnected */
+ * -ENODEV: device got disconnected
+ */
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
@@ -745,7 +746,8 @@ static void btusb_bulk_complete(struct urb *urb)
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
- * -ENODEV: device got disconnected */
+ * -ENODEV: device got disconnected
+ */
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
@@ -840,7 +842,8 @@ static void btusb_isoc_complete(struct urb *urb)
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
- * -ENODEV: device got disconnected */
+ * -ENODEV: device got disconnected
+ */
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
@@ -952,7 +955,8 @@ static void btusb_diag_complete(struct urb *urb)
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
/* -EPERM: urb is being killed;
- * -ENODEV: device got disconnected */
+ * -ENODEV: device got disconnected
+ */
if (err != -EPERM && err != -ENODEV)
BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
@@ -2896,7 +2900,8 @@ static int btusb_probe(struct usb_interface *intf,
struct usb_device *udev = interface_to_usbdev(intf);
/* Old firmware would otherwise let ath3k driver load
- * patch and sysconfig files */
+ * patch and sysconfig files
+ */
if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001)
return -ENODEV;
}
diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c
index 85a3978b064f..70e4c5a5598e 100644
--- a/drivers/bluetooth/btwilink.c
+++ b/drivers/bluetooth/btwilink.c
@@ -93,8 +93,7 @@ static void st_reg_completion_cb(void *priv_data, int data)
complete(&lhst->wait_reg_completion);
}
-/* Called by Shared Transport layer when receive data is
- * available */
+/* Called by Shared Transport layer when receive data is available */
static long st_receive(void *priv_data, struct sk_buff *skb)
{
struct ti_st *lhst = priv_data;
@@ -198,7 +197,8 @@ static int ti_st_open(struct hci_dev *hdev)
}
/* Is ST registration callback
- * called with ERROR status? */
+ * called with ERROR status?
+ */
if (hst->reg_status != 0) {
BT_ERR("ST registration completed with invalid "
"status %d", hst->reg_status);
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 8397b716fa65..a746627e784e 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -457,7 +457,8 @@ static int hci_uart_tty_open(struct tty_struct *tty)
BT_DBG("tty %p", tty);
/* Error if the tty has no write op instead of leaving an exploitable
- hole */
+ * hole
+ */
if (tty->ops->write == NULL)
return -EOPNOTSUPP;
diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c
index c982943f0747..5cf04a4b69fc 100644
--- a/drivers/bluetooth/hci_ll.c
+++ b/drivers/bluetooth/hci_ll.c
@@ -622,7 +622,8 @@ static int download_firmware(struct ll_device *lldev)
cmd = (struct hci_command *)action_ptr;
if (cmd->opcode == 0xff36) {
/* ignore remote change
- * baud rate HCI VS command */
+ * baud rate HCI VS command
+ */
bt_dev_warn(lldev->hu.hdev, "change remote baud rate command in firmware");
break;
}
--
2.13.2
Powered by blists - more mailing lists