| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 17 Sep 2017 12:46:20 +0100
From: Sudip Mukherjee <sudipm.mukherjee@...il.com>
To: "David S. Miller" <davem@...emloft.net>,
Thomas Sailer <t.sailer@...mni.ethz.ch>
Cc: linux-kernel@...r.kernel.org, linux-hams@...r.kernel.org,
netdev@...r.kernel.org,
Sudip Mukherjee <sudipm.mukherjee@...il.com>
Subject: [PATCH] hamradio: baycom: use new parport device model
Modify baycom driver to use the new parallel port device model.
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@...il.com>
---
Not tested on real hardware, only tested on qemu and verified that the
device is binding to the driver properly in epp_open but then unbinding
as the device was not found.
drivers/net/hamradio/baycom_epp.c | 50 +++++++++++++++++++++++++++++++++++----
1 file changed, 46 insertions(+), 4 deletions(-)
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 1503f10..1e62d00 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -840,6 +840,7 @@ static int epp_open(struct net_device *dev)
unsigned char tmp[128];
unsigned char stat;
unsigned long tstart;
+ struct pardev_cb par_cb;
if (!pp) {
printk(KERN_ERR "%s: parport at 0x%lx unknown\n", bc_drvname, dev->base_addr);
@@ -859,8 +860,21 @@ static int epp_open(struct net_device *dev)
return -EIO;
}
memset(&bc->modem, 0, sizeof(bc->modem));
- bc->pdev = parport_register_device(pp, dev->name, NULL, epp_wakeup,
- NULL, PARPORT_DEV_EXCL, dev);
+ memset(&par_cb, 0, sizeof(par_cb));
+ par_cb.wakeup = epp_wakeup;
+ par_cb.private = (void *)dev;
+ par_cb.flags = PARPORT_DEV_EXCL;
+ for (i = 0; i < NR_PORTS; i++)
+ if (baycom_device[i] == dev)
+ break;
+
+ if (i == NR_PORTS) {
+ pr_err("%s: no device found\n", bc_drvname);
+ parport_put_port(pp);
+ return -ENODEV;
+ }
+
+ bc->pdev = parport_register_dev_model(pp, dev->name, &par_cb, i);
parport_put_port(pp);
if (!bc->pdev) {
printk(KERN_ERR "%s: cannot register parport at 0x%lx\n", bc_drvname, pp->base);
@@ -1185,6 +1199,23 @@ MODULE_LICENSE("GPL");
/* --------------------------------------------------------------------- */
+static int baycom_epp_par_probe(struct pardevice *par_dev)
+{
+ struct device_driver *drv = par_dev->dev.driver;
+ int len = strlen(drv->name);
+
+ if (strncmp(par_dev->name, drv->name, len))
+ return -ENODEV;
+
+ return 0;
+}
+
+static struct parport_driver baycom_epp_par_driver = {
+ .name = "bce",
+ .probe = baycom_epp_par_probe,
+ .devmodel = true,
+};
+
static void __init baycom_epp_dev_setup(struct net_device *dev)
{
struct baycom_state *bc = netdev_priv(dev);
@@ -1204,10 +1235,15 @@ static void __init baycom_epp_dev_setup(struct net_device *dev)
static int __init init_baycomepp(void)
{
- int i, found = 0;
+ int i, found = 0, ret;
char set_hw = 1;
printk(bc_drvinfo);
+
+ ret = parport_register_driver(&baycom_epp_par_driver);
+ if (ret)
+ return ret;
+
/*
* register net devices
*/
@@ -1241,7 +1277,12 @@ static int __init init_baycomepp(void)
found++;
}
- return found ? 0 : -ENXIO;
+ if (found == 0) {
+ parport_unregister_driver(&baycom_epp_par_driver);
+ return -ENXIO;
+ }
+
+ return 0;
}
static void __exit cleanup_baycomepp(void)
@@ -1260,6 +1301,7 @@ static void __exit cleanup_baycomepp(void)
printk(paranoia_str, "cleanup_module");
}
}
+ parport_unregister_driver(&baycom_epp_par_driver);
}
module_init(init_baycomepp);
--
2.7.4
Powered by blists - more mailing lists