lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 10 Oct 2017 16:56:20 +0100
From:   Will Deacon <will.deacon@....com>
To:     Pavel Tatashin <pasha.tatashin@...cle.com>
Cc:     linux-kernel@...r.kernel.org, sparclinux@...r.kernel.org,
        linux-mm@...ck.org, linuxppc-dev@...ts.ozlabs.org,
        linux-s390@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        x86@...nel.org, kasan-dev@...glegroups.com, borntraeger@...ibm.com,
        heiko.carstens@...ibm.com, davem@...emloft.net,
        willy@...radead.org, mhocko@...nel.org, ard.biesheuvel@...aro.org,
        mark.rutland@....com, catalin.marinas@....com, sam@...nborg.org,
        mgorman@...hsingularity.net, steven.sistare@...cle.com,
        daniel.m.jordan@...cle.com, bob.picco@...cle.com
Subject: Re: [PATCH v11 7/9] arm64/kasan: add and use kasan_map_populate()

Hi Pavel,

On Mon, Oct 09, 2017 at 06:19:29PM -0400, Pavel Tatashin wrote:
> During early boot, kasan uses vmemmap_populate() to establish its shadow
> memory. But, that interface is intended for struct pages use.
> 
> Because of the current project, vmemmap won't be zeroed during allocation,
> but kasan expects that memory to be zeroed. We are adding a new
> kasan_map_populate() function to resolve this difference.
> 
> Therefore, we must use a new interface to allocate and map kasan shadow
> memory, that also zeroes memory for us.
> 
> Signed-off-by: Pavel Tatashin <pasha.tatashin@...cle.com>
> ---
>  arch/arm64/mm/kasan_init.c | 72 ++++++++++++++++++++++++++++++++++++++++++----
>  1 file changed, 66 insertions(+), 6 deletions(-)

Thanks for doing this, although I still think we can do better and avoid the
additional walking code altogether, as well as removing the dependence on
vmemmap. Rather than keep messing you about here (sorry about that), I've
written an arm64 patch for you to take on top of this series. Please take
a look below.

Cheers,

Will

--->8

>From 36c6c7c06273d08348b47c1a182116b0a1df8363 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@....com>
Date: Tue, 10 Oct 2017 15:49:43 +0100
Subject: [PATCH] arm64: kasan: Avoid using vmemmap_populate to initialise
 shadow

The kasan shadow is currently mapped using vmemmap_populate since that
provides a semi-convenient way to map pages into swapper. However, since
that no longer zeroes the mapped pages, it is not suitable for kasan,
which requires that the shadow is zeroed in order to avoid false
positives.

This patch removes our reliance on vmemmap_populate and reuses the
existing kasan page table code, which is already required for creating
the early shadow.

Signed-off-by: Will Deacon <will.deacon@....com>
---
 arch/arm64/Kconfig         |   2 +-
 arch/arm64/mm/kasan_init.c | 176 +++++++++++++++++++--------------------------
 2 files changed, 74 insertions(+), 104 deletions(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 0df64a6a56d4..888580b9036e 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -68,7 +68,7 @@ config ARM64
 	select HAVE_ARCH_BITREVERSE
 	select HAVE_ARCH_HUGE_VMAP
 	select HAVE_ARCH_JUMP_LABEL
-	select HAVE_ARCH_KASAN if SPARSEMEM_VMEMMAP && !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
+	select HAVE_ARCH_KASAN if !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_MMAP_RND_BITS
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c
index cb4af2951c90..b922826d9908 100644
--- a/arch/arm64/mm/kasan_init.c
+++ b/arch/arm64/mm/kasan_init.c
@@ -11,6 +11,7 @@
  */
 
 #define pr_fmt(fmt) "kasan: " fmt
+#include <linux/bootmem.h>
 #include <linux/kasan.h>
 #include <linux/kernel.h>
 #include <linux/sched/task.h>
@@ -28,66 +29,6 @@
 
 static pgd_t tmp_pg_dir[PTRS_PER_PGD] __initdata __aligned(PGD_SIZE);
 
-/* Creates mappings for kasan during early boot. The mapped memory is zeroed */
-static int __meminit kasan_map_populate(unsigned long start, unsigned long end,
-					int node)
-{
-	unsigned long addr, pfn, next;
-	unsigned long long size;
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *pte;
-	int ret;
-
-	ret = vmemmap_populate(start, end, node);
-	/*
-	 * We might have partially populated memory, so check for no entries,
-	 * and zero only those that actually exist.
-	 */
-	for (addr = start; addr < end; addr = next) {
-		pgd = pgd_offset_k(addr);
-		if (pgd_none(*pgd)) {
-			next = pgd_addr_end(addr, end);
-			continue;
-		}
-
-		pud = pud_offset(pgd, addr);
-		if (pud_none(*pud)) {
-			next = pud_addr_end(addr, end);
-			continue;
-		}
-		if (pud_sect(*pud)) {
-			/* This is PUD size page */
-			next = pud_addr_end(addr, end);
-			size = PUD_SIZE;
-			pfn = pud_pfn(*pud);
-		} else {
-			pmd = pmd_offset(pud, addr);
-			if (pmd_none(*pmd)) {
-				next = pmd_addr_end(addr, end);
-				continue;
-			}
-			if (pmd_sect(*pmd)) {
-				/* This is PMD size page */
-				next = pmd_addr_end(addr, end);
-				size = PMD_SIZE;
-				pfn = pmd_pfn(*pmd);
-			} else {
-				pte = pte_offset_kernel(pmd, addr);
-				next = addr + PAGE_SIZE;
-				if (pte_none(*pte))
-					continue;
-				/* This is base size page */
-				size = PAGE_SIZE;
-				pfn = pte_pfn(*pte);
-			}
-		}
-		memset(phys_to_virt(PFN_PHYS(pfn)), 0, size);
-	}
-	return ret;
-}
-
 /*
  * The p*d_populate functions call virt_to_phys implicitly so they can't be used
  * directly on kernel symbols (bm_p*d). All the early functions are called too
@@ -95,77 +36,117 @@ static int __meminit kasan_map_populate(unsigned long start, unsigned long end,
  * with the physical address from __pa_symbol.
  */
 
-static void __init kasan_early_pte_populate(pmd_t *pmd, unsigned long addr,
-					unsigned long end)
+static phys_addr_t __init kasan_alloc_zeroed_page(int node)
 {
-	pte_t *pte;
-	unsigned long next;
+	void *p = memblock_virt_alloc_try_nid(PAGE_SIZE, PAGE_SIZE,
+					      __pa(MAX_DMA_ADDRESS),
+					      MEMBLOCK_ALLOC_ACCESSIBLE, node);
+	return __pa(p);
+}
 
-	if (pmd_none(*pmd))
-		__pmd_populate(pmd, __pa_symbol(kasan_zero_pte), PMD_TYPE_TABLE);
+static pte_t *__init kasan_pte_offset(pmd_t *pmd, unsigned long addr, int node,
+				      bool early)
+{
+	if (pmd_none(*pmd)) {
+		phys_addr_t pte_phys = early ? __pa_symbol(kasan_zero_pte)
+					     : kasan_alloc_zeroed_page(node);
+		__pmd_populate(pmd, pte_phys, PMD_TYPE_TABLE);
+	}
+
+	return early ? pte_offset_kimg(pmd, addr)
+		     : pte_offset_kernel(pmd, addr);
+}
+
+static pmd_t *__init kasan_pmd_offset(pud_t *pud, unsigned long addr, int node,
+				      bool early)
+{
+	if (pud_none(*pud)) {
+		phys_addr_t pmd_phys = early ? __pa_symbol(kasan_zero_pmd)
+					     : kasan_alloc_zeroed_page(node);
+		__pud_populate(pud, pmd_phys, PMD_TYPE_TABLE);
+	}
+
+	return early ? pmd_offset_kimg(pud, addr) : pmd_offset(pud, addr);
+}
+
+static pud_t *__init kasan_pud_offset(pgd_t *pgd, unsigned long addr, int node,
+				      bool early)
+{
+	if (pgd_none(*pgd)) {
+		phys_addr_t pud_phys = early ? __pa_symbol(kasan_zero_pud)
+					     : kasan_alloc_zeroed_page(node);
+		__pgd_populate(pgd, pud_phys, PMD_TYPE_TABLE);
+	}
+
+	return early ? pud_offset_kimg(pgd, addr) : pud_offset(pgd, addr);
+}
+
+static void __init kasan_pte_populate(pmd_t *pmd, unsigned long addr,
+				      unsigned long end, int node, bool early)
+{
+	unsigned long next;
+	pte_t *pte = kasan_pte_offset(pmd, addr, node, early);
 
-	pte = pte_offset_kimg(pmd, addr);
 	do {
+		phys_addr_t page_phys = early ? __pa_symbol(kasan_zero_page)
+					      : kasan_alloc_zeroed_page(node);
 		next = addr + PAGE_SIZE;
-		set_pte(pte, pfn_pte(sym_to_pfn(kasan_zero_page),
-					PAGE_KERNEL));
+		set_pte(pte, pfn_pte(__phys_to_pfn(page_phys), PAGE_KERNEL));
 	} while (pte++, addr = next, addr != end && pte_none(*pte));
 }
 
-static void __init kasan_early_pmd_populate(pud_t *pud,
-					unsigned long addr,
-					unsigned long end)
+static void __init kasan_pmd_populate(pud_t *pud, unsigned long addr,
+				      unsigned long end, int node, bool early)
 {
-	pmd_t *pmd;
 	unsigned long next;
+	pmd_t *pmd = kasan_pmd_offset(pud, addr, node, early);
 
-	if (pud_none(*pud))
-		__pud_populate(pud, __pa_symbol(kasan_zero_pmd), PMD_TYPE_TABLE);
-
-	pmd = pmd_offset_kimg(pud, addr);
 	do {
 		next = pmd_addr_end(addr, end);
-		kasan_early_pte_populate(pmd, addr, next);
+		kasan_pte_populate(pmd, addr, next, node, early);
 	} while (pmd++, addr = next, addr != end && pmd_none(*pmd));
 }
 
-static void __init kasan_early_pud_populate(pgd_t *pgd,
-					unsigned long addr,
-					unsigned long end)
+static void __init kasan_pud_populate(pgd_t *pgd, unsigned long addr,
+				      unsigned long end, int node, bool early)
 {
-	pud_t *pud;
 	unsigned long next;
+	pud_t *pud = kasan_pud_offset(pgd, addr, node, early);
 
-	if (pgd_none(*pgd))
-		__pgd_populate(pgd, __pa_symbol(kasan_zero_pud), PUD_TYPE_TABLE);
-
-	pud = pud_offset_kimg(pgd, addr);
 	do {
 		next = pud_addr_end(addr, end);
-		kasan_early_pmd_populate(pud, addr, next);
+		kasan_pmd_populate(pud, addr, next, node, early);
 	} while (pud++, addr = next, addr != end && pud_none(*pud));
 }
 
-static void __init kasan_map_early_shadow(void)
+static void __init kasan_pgd_populate(unsigned long addr, unsigned long end,
+				      int node, bool early)
 {
-	unsigned long addr = KASAN_SHADOW_START;
-	unsigned long end = KASAN_SHADOW_END;
 	unsigned long next;
 	pgd_t *pgd;
 
 	pgd = pgd_offset_k(addr);
 	do {
 		next = pgd_addr_end(addr, end);
-		kasan_early_pud_populate(pgd, addr, next);
+		kasan_pud_populate(pgd, addr, next, node, early);
 	} while (pgd++, addr = next, addr != end);
 }
 
+/* The early shadow maps everything to a single page of zeroes */
 asmlinkage void __init kasan_early_init(void)
 {
 	BUILD_BUG_ON(KASAN_SHADOW_OFFSET != KASAN_SHADOW_END - (1UL << 61));
 	BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_START, PGDIR_SIZE));
 	BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_END, PGDIR_SIZE));
-	kasan_map_early_shadow();
+	kasan_pgd_populate(KASAN_SHADOW_START, KASAN_SHADOW_END, NUMA_NO_NODE,
+			   true);
+}
+
+/* Set up full kasan mappings, ensuring that the mapped pages are zeroed */
+static void __init kasan_map_populate(unsigned long start, unsigned long end,
+				      int node)
+{
+	kasan_pgd_populate(start & PAGE_MASK, PAGE_ALIGN(end), node, false);
 }
 
 /*
@@ -224,17 +205,6 @@ void __init kasan_init(void)
 	kasan_map_populate(kimg_shadow_start, kimg_shadow_end,
 			   pfn_to_nid(virt_to_pfn(lm_alias(_text))));
 
-	/*
-	 * kasan_map_populate() has populated the shadow region that covers the
-	 * kernel image with SWAPPER_BLOCK_SIZE mappings, so we have to round
-	 * the start and end addresses to SWAPPER_BLOCK_SIZE as well, to prevent
-	 * kasan_populate_zero_shadow() from replacing the page table entries
-	 * (PMD or PTE) at the edges of the shadow region for the kernel
-	 * image.
-	 */
-	kimg_shadow_start = round_down(kimg_shadow_start, SWAPPER_BLOCK_SIZE);
-	kimg_shadow_end = round_up(kimg_shadow_end, SWAPPER_BLOCK_SIZE);
-
 	kasan_populate_zero_shadow((void *)KASAN_SHADOW_START,
 				   (void *)mod_shadow_start);
 	kasan_populate_zero_shadow((void *)kimg_shadow_end,
-- 
2.1.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ