| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 10 Oct 2017 12:36:16 -0500
From: Tom Saeger <tom.saeger@...cle.com>
To: Jonathan Corbet <corbet@....net>
Cc: Tom Saeger <tom.saeger@...cle.com>, linux-doc@...r.kernel.org,
linux-media@...r.kernel.org, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 2/8] Documentation: fix admin-guide doc refs
Make admin-guide document refs valid.
Signed-off-by: Tom Saeger <tom.saeger@...cle.com>
---
Documentation/ABI/stable/sysfs-devices | 2 +-
Documentation/ABI/testing/sysfs-devices-system-cpu | 6 ++++--
Documentation/ABI/testing/sysfs-power | 6 ++++--
Documentation/admin-guide/README.rst | 2 +-
Documentation/admin-guide/kernel-parameters.txt | 4 ++--
Documentation/admin-guide/reporting-bugs.rst | 4 ++--
Documentation/laptops/laptop-mode.txt | 6 +++---
Documentation/media/v4l-drivers/bttv.rst | 2 +-
Documentation/power/interface.txt | 3 ++-
9 files changed, 20 insertions(+), 15 deletions(-)
diff --git a/Documentation/ABI/stable/sysfs-devices b/Documentation/ABI/stable/sysfs-devices
index 35c457f8ce73..4404bd9b96c1 100644
--- a/Documentation/ABI/stable/sysfs-devices
+++ b/Documentation/ABI/stable/sysfs-devices
@@ -1,5 +1,5 @@
# Note: This documents additional properties of any device beyond what
-# is documented in Documentation/sysfs-rules.txt
+# is documented in Documentation/admin-guide/sysfs-rules.rst
What: /sys/devices/*/of_node
Date: February 2015
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index f3d5817c4ef0..d6d862db3b5d 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -187,7 +187,8 @@ Description: Processor frequency boosting control
This switch controls the boost setting for the whole system.
Boosting allows the CPU and the firmware to run at a frequency
beyound it's nominal limit.
- More details can be found in Documentation/cpu-freq/boost.txt
+ More details can be found in
+ Documentation/admin-guide/pm/cpufreq.rst
What: /sys/devices/system/cpu/cpu#/crash_notes
@@ -223,7 +224,8 @@ Description: Parameters for the Intel P-state driver
no_turbo: limits the driver to selecting P states below the turbo
frequency range.
- More details can be found in Documentation/cpu-freq/intel-pstate.txt
+ More details can be found in
+ Documentation/admin-guide/pm/intel_pstate.rst
What: /sys/devices/system/cpu/cpu*/cache/index*/<set_of_attributes_mentioned_below>
Date: July 2014(documented, existed before August 2008)
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
index a1d1612f3651..1e0d1dac706b 100644
--- a/Documentation/ABI/testing/sysfs-power
+++ b/Documentation/ABI/testing/sysfs-power
@@ -18,7 +18,8 @@ Description:
Writing one of the above strings to this file causes the system
to transition into the corresponding state, if available.
- See Documentation/power/states.txt for more information.
+ See Documentation/admin-guide/pm/sleep-states.rst for more
+ information.
What: /sys/power/mem_sleep
Date: November 2016
@@ -35,7 +36,8 @@ Description:
represented by it to be used on subsequent attempts to suspend
the system.
- See Documentation/power/states.txt for more information.
+ See Documentation/admin-guide/pm/sleep-states.rst for more
+ information.
What: /sys/power/disk
Date: September 2006
diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst
index b5343c5aa224..63066db39910 100644
--- a/Documentation/admin-guide/README.rst
+++ b/Documentation/admin-guide/README.rst
@@ -350,7 +350,7 @@ If something goes wrong
help debugging the problem. The text above the dump is also
important: it tells something about why the kernel dumped code (in
the above example, it's due to a bad kernel pointer). More information
- on making sense of the dump is in Documentation/admin-guide/oops-tracing.rst
+ on making sense of the dump is in Documentation/admin-guide/bug-hunting.rst
- If you compiled the kernel with CONFIG_KALLSYMS you can send the dump
as is, otherwise you will have to use the ``ksymoops`` program to make
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 05496622b4ef..e857bbbc8575 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -2248,7 +2248,7 @@
s2idle - Suspend-To-Idle
shallow - Power-On Suspend or equivalent (if supported)
deep - Suspend-To-RAM or equivalent (if supported)
- See Documentation/power/states.txt.
+ See Documentation/admin-guide/pm/sleep-states.rst.
meye.*= [HW] Set MotionEye Camera parameters
See Documentation/video4linux/meye.txt.
@@ -3134,7 +3134,7 @@
plip= [PPT,NET] Parallel port network link
Format: { parport<nr> | timid | 0 }
- See also Documentation/parport.txt.
+ See also Documentation/admin-guide/parport.rst.
pmtmr= [X86] Manual setup of pmtmr I/O Port.
Override pmtimer IOPort with a hex value.
diff --git a/Documentation/admin-guide/reporting-bugs.rst b/Documentation/admin-guide/reporting-bugs.rst
index 26b60b419652..4650edb8840a 100644
--- a/Documentation/admin-guide/reporting-bugs.rst
+++ b/Documentation/admin-guide/reporting-bugs.rst
@@ -94,7 +94,7 @@ step-by-step instructions for how a user can trigger the bug.
If the failure includes an "OOPS:", take a picture of the screen, capture
a netconsole trace, or type the message from your screen into the bug
-report. Please read "Documentation/admin-guide/oops-tracing.rst" before posting your
+report. Please read "Documentation/admin-guide/bug-hunting.rst" before posting your
bug report. This explains what you should do with the "Oops" information
to make it useful to the recipient.
@@ -120,7 +120,7 @@ summary from [1.]>" for easy identification by the developers::
[4.2.] Kernel .config file:
[5.] Most recent kernel version which did not have the bug:
[6.] Output of Oops.. message (if applicable) with symbolic information
- resolved (see Documentation/admin-guide/oops-tracing.rst)
+ resolved (see Documentation/admin-guide/bug-hunting.rst)
[7.] A small shell script or example program which triggers the
problem (if possible)
[8.] Environment
diff --git a/Documentation/laptops/laptop-mode.txt b/Documentation/laptops/laptop-mode.txt
index 19276f5d195c..1c707fc9b141 100644
--- a/Documentation/laptops/laptop-mode.txt
+++ b/Documentation/laptops/laptop-mode.txt
@@ -184,7 +184,7 @@ is done when dirty_ratio is reached.
DO_CPU:
Enable CPU frequency scaling when in laptop mode. (Requires CPUFreq to be setup.
-See Documentation/cpu-freq/user-guide.txt for more info. Disabled by default.)
+See Documentation/admin-guide/pm/cpufreq.rst for more info. Disabled by default.)
CPU_MAXFREQ:
@@ -287,7 +287,7 @@ MINIMUM_BATTERY_MINUTES=10
# Should the maximum CPU frequency be adjusted down while on battery?
# Requires CPUFreq to be setup.
-# See Documentation/cpu-freq/user-guide.txt for more info
+# See Documentation/admin-guide/pm/cpufreq.rst for more info
#DO_CPU=0
# When on battery what is the maximum CPU speed that the system should
@@ -378,7 +378,7 @@ BATT_HD=${BATT_HD:-'4'}
DIRTY_RATIO=${DIRTY_RATIO:-'40'}
# cpu frequency scaling
-# See Documentation/cpu-freq/user-guide.txt for more info
+# See Documentation/admin-guide/pm/cpufreq.rst for more info
DO_CPU=${CPU_MANAGE:-'0'}
CPU_MAXFREQ=${CPU_MAXFREQ:-'slowest'}
diff --git a/Documentation/media/v4l-drivers/bttv.rst b/Documentation/media/v4l-drivers/bttv.rst
index 195ccaac2816..5f35e2fb5afa 100644
--- a/Documentation/media/v4l-drivers/bttv.rst
+++ b/Documentation/media/v4l-drivers/bttv.rst
@@ -307,7 +307,7 @@ console and let some terminal application log the messages. /me uses
screen. See Documentation/admin-guide/serial-console.rst for details on setting
up a serial console.
-Read Documentation/admin-guide/oops-tracing.rst to learn how to get any useful
+Read Documentation/admin-guide/bug-hunting.rst to learn how to get any useful
information out of a register+stack dump printed by the kernel on
protection faults (so-called "kernel oops").
diff --git a/Documentation/power/interface.txt b/Documentation/power/interface.txt
index 974916ff6608..7dc75f48e8bd 100644
--- a/Documentation/power/interface.txt
+++ b/Documentation/power/interface.txt
@@ -24,7 +24,8 @@ platform.
If one of the strings listed in /sys/power/state is written to it, the system
will attempt to transition into the corresponding sleep state. Refer to
-Documentation/power/states.txt for a description of each of those states.
+Documentation/admin-guide/pm/sleep-states.rst for a description of each of
+those states.
/sys/power/disk controls the operating mode of hibernation (Suspend-to-Disk).
Specifically, it tells the kernel what to do after creating a hibernation image.
--
2.14.2
Powered by blists - more mailing lists