linux-kernel - [PATCH 5/7] drm/sun4i: backend: Offset layer buffer address by DRAM starting address

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sat, 14 Oct 2017 12:02:50 +0800
From:   Chen-Yu Tsai <wens@...e.org>
To:     Maxime Ripard <maxime.ripard@...e-electrons.com>,
        David Airlie <airlied@...ux.ie>
Cc:     Chen-Yu Tsai <wens@...e.org>, dri-devel@...ts.freedesktop.org,
        linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: [PATCH 5/7] drm/sun4i: backend: Offset layer buffer address by DRAM starting address

The display backend, as well as other peripherals that have a DRAM
clock gate and access DRAM directly, bypassing the system bus,
address the DRAM starting from 0x0, while physical addresses the
system uses starts from 0x40000000 (or 0x20000000 in A80's case).

Correct the address configured into the backend layer registers
by PHYS_OFFSET to account for this.

Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Chen-Yu Tsai <wens@...e.org>
---
 drivers/gpu/drm/sun4i/sun4i_backend.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c
index 4fefd8add714..d18d7e88d511 100644
--- a/drivers/gpu/drm/sun4i/sun4i_backend.c
+++ b/drivers/gpu/drm/sun4i/sun4i_backend.c
@@ -216,6 +216,13 @@ int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend,
 	paddr = drm_fb_cma_get_gem_addr(fb, state, 0);
 	DRM_DEBUG_DRIVER("Setting buffer address to %pad\n", &paddr);
 
+	/*
+	 * backend DMA accesses DRAM directly, bypassing the system
+	 * bus. As such, the address range is different and the buffer
+	 * address needs to be corrected.
+	 */
+	paddr -= PHYS_OFFSET;
+
 	/* Write the 32 lower bits of the address (in bits) */
 	lo_paddr = paddr << 3;
 	DRM_DEBUG_DRIVER("Setting address lower bits to 0x%x\n", lo_paddr);
-- 
2.14.2