linux-kernel - Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

Open Source and information security mailing list archives

Date:   Fri, 10 Nov 2017 09:05:59 +0800
From:   Icenowy Zheng <icenowy@...c.io>
To:     Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc:     Giulio Benetti <giulio.benetti@...ronovasrl.com>,
        mark.rutland@....com, devicetree@...r.kernel.org,
        linux-sunxi@...glegroups.com, linux@...linux.org.uk,
        linux-kernel@...r.kernel.org, wens@...e.org, robh+dt@...nel.org,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

在 2017-11-08 18:56，Maxime Ripard 写道：
> Hi,
> 
> On Tue, Nov 07, 2017 at 05:38:55PM +0100, Giulio Benetti wrote:
>> Board could be any with A20,
>> for example Olinuxino A20.
>> Or our Q027, S027 boards, but final dts still are not complete.
> 
> Therefore no upstream boards are using it right now, so we'll merge it
> when that will be the case.

I think the LCD connector on Banana Pi's uses parallel interface,
although the LCD should be an external DT overlay.

> 
> Maxime
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives