linux-kernel - [PATCH] ARM: da850: Fix LEGO EV3 battery voltage gpio

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Sun,  3 Dec 2017 13:29:33 -0600
From:   David Lechner <david@...hnology.com>
To:     linux-arm-kernel@...ts.infradead.org
Cc:     David Lechner <david@...hnology.com>, Sekhar Nori <nsekhar@...com>,
        linux-kernel@...r.kernel.org
Subject: [PATCH] ARM: da850: Fix LEGO EV3 battery voltage gpio

This fixes the battery voltage monitoring gpio-hog settings.

When the gpio is low, it turns off the battery voltage to the ADC chip.
However, this needs to be on all of the time so that we can monitor
battery voltage.

Signed-off-by: David Lechner <david@...hnology.com>
---
 arch/arm/boot/dts/da850-lego-ev3.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index aeb5fb0..9d15982 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -463,7 +463,7 @@
 	batt_volt_en {
 		gpio-hog;
 		gpios = <6 GPIO_ACTIVE_HIGH>;
-		output-low;
+		output-high;
 	};
 
 	/* Don't impede Bluetooth clock signal */
-- 
2.7.4