| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 12 Dec 2017 16:16:42 -0600
From: Bjorn Helgaas <helgaas@...nel.org>
To: Jim Quinlan <jim2101024@...il.com>
Cc: linux-kernel@...r.kernel.org, Bjorn Helgaas <bhelgaas@...gle.com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Rob Herring <robh+dt@...nel.org>,
Brian Norris <computersforpeace@...il.com>,
Russell King <rmk+kernel@...linux.org.uk>,
Robin Murphy <robin.murphy@....com>,
Christoph Hellwig <hch@....de>,
Florian Fainelli <f.fainelli@...il.com>,
Jonas Gorski <jonas.gorski@...il.com>,
Mark Rutland <mark.rutland@....com>,
devicetree@...r.kernel.org, linux-mips@...ux-mips.org,
linux-pci@...r.kernel.org, Kevin Cernekee <cernekee@...il.com>,
Ralf Baechle <ralf@...ux-mips.org>,
bcm-kernel-feedback-list@...adcom.com,
Gregory Fong <gregory.0xf0@...il.com>,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v3 3/8] PCI: brcmstb: Add Broadcom STB PCIe host
controller driver
On Tue, Nov 14, 2017 at 05:12:07PM -0500, Jim Quinlan wrote:
> This commit adds the basic Broadcom STB PCIe controller. Missing is
> the ability to process MSI and also handle dma-ranges for inbound
> memory accesses. These two functionalities are added in subsequent
> commits.
>
> The PCIe block contains an MDIO interface. This is a local interface
> only accessible by the PCIe controller. It cannot be used or shared
> by any other HW. As such, the small amount of code for this
> controller is included in this driver as there is little upside to put
> it elsewhere.
>
> Signed-off-by: Jim Quinlan <jim2101024@...il.com>
> ---
> drivers/pci/host/Kconfig | 9 +
> drivers/pci/host/Makefile | 1 +
> drivers/pci/host/pcie-brcmstb.c | 1124 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 1134 insertions(+)
> create mode 100644 drivers/pci/host/pcie-brcmstb.c
>
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index b868803..751463e 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -220,4 +220,13 @@ config VMD
> To compile this driver as a module, choose M here: the
> module will be called vmd.
>
> +config PCIE_BRCMSTB
> + tristate "Broadcom Brcmstb PCIe platform host driver"
> + depends on ARCH_BRCMSTB || BMIPS_GENERIC
> + depends on OF
> + depends on SOC_BRCMSTB
> + default ARCH_BRCMSTB || BMIPS_GENERIC
> + help
> + Adds support for Broadcom Settop Box PCIe host controller.
> +
> endmenu
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index 1238278..a8b9923 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -21,6 +21,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
> obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
> obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
> obj-$(CONFIG_VMD) += vmd.o
> +obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
>
> # The following drivers are for devices that use the generic ACPI
> # pci_root.c driver but don't support standard ECAM config access.
> diff --git a/drivers/pci/host/pcie-brcmstb.c b/drivers/pci/host/pcie-brcmstb.c
> new file mode 100644
> index 0000000..d8a8f7a
> --- /dev/null
> +++ b/drivers/pci/host/pcie-brcmstb.c
> @@ -0,0 +1,1124 @@
> +/*
> + * Copyright (C) 2009 - 2017 Broadcom
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/compiler.h>
> +#include <linux/delay.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/ioport.h>
> +#include <linux/irqdomain.h>
> +#include <linux/kernel.h>
> +#include <linux/list.h>
> +#include <linux/log2.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/pci.h>
> +#include <linux/printk.h>
> +#include <linux/sizes.h>
> +#include <linux/slab.h>
> +#include <soc/brcmstb/memory_api.h>
> +#include <linux/string.h>
> +#include <linux/types.h>
> +
> +/* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */
> +#define BRCM_PCIE_CAP_REGS 0x00ac
Add a blank line before multi-line comments.
> +/*
> + * Broadcom Settop Box PCIE Register Offsets. The names are from
> + * the chip's RDB and we use them here so that a script can correlate
> + * this code and the RDB to prevent discrepancies.
Use "PCIe" capitalization in English text and messages.
> + */
> +#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1 0x0188
> +#define PCIE_RC_CFG_PRIV1_ID_VAL3 0x043c
> +#define PCIE_RC_DL_MDIO_ADDR 0x1100
> +#define PCIE_RC_DL_MDIO_WR_DATA 0x1104
> +#define PCIE_RC_DL_MDIO_RD_DATA 0x1108
> +#define PCIE_MISC_MISC_CTRL 0x4008
> +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO 0x400c
> +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI 0x4010
> +#define PCIE_MISC_RC_BAR1_CONFIG_LO 0x402c
> +#define PCIE_MISC_RC_BAR2_CONFIG_LO 0x4034
> +#define PCIE_MISC_RC_BAR2_CONFIG_HI 0x4038
> +#define PCIE_MISC_RC_BAR3_CONFIG_LO 0x403c
> +#define PCIE_MISC_PCIE_CTRL 0x4064
> +#define PCIE_MISC_PCIE_STATUS 0x4068
> +#define PCIE_MISC_REVISION 0x406c
> +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT 0x4070
> +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI 0x4080
> +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI 0x4084
> +#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204
> +#define PCIE_INTR2_CPU_BASE 0x4300
> +
> +/*
> + * Broadcom Settop Box PCIE Register Field shift and mask info. The
> + * names are from the chip's RDB and we use them here so that a script
> + * can correlate this code and the RDB to prevent discrepancies.
> + */
> +#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK 0xc
> +#define PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_SHIFT 0x2
> +#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_MASK 0xffffff
> +#define PCIE_RC_CFG_PRIV1_ID_VAL3_CLASS_CODE_SHIFT 0x0
> +#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_MASK 0x1000
> +#define PCIE_MISC_MISC_CTRL_SCB_ACCESS_EN_SHIFT 0xc
> +#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_MASK 0x2000
> +#define PCIE_MISC_MISC_CTRL_CFG_READ_UR_MODE_SHIFT 0xd
> +#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_MASK 0x300000
> +#define PCIE_MISC_MISC_CTRL_MAX_BURST_SIZE_SHIFT 0x14
> +#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_MASK 0xf8000000
> +#define PCIE_MISC_MISC_CTRL_SCB0_SIZE_SHIFT 0x1b
> +#define PCIE_MISC_MISC_CTRL_SCB1_SIZE_MASK 0x7c00000
> +#define PCIE_MISC_MISC_CTRL_SCB1_SIZE_SHIFT 0x16
> +#define PCIE_MISC_MISC_CTRL_SCB2_SIZE_MASK 0x1f
> +#define PCIE_MISC_MISC_CTRL_SCB2_SIZE_SHIFT 0x0
> +#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_MASK 0x1f
> +#define PCIE_MISC_RC_BAR1_CONFIG_LO_SIZE_SHIFT 0x0
> +#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_MASK 0x1f
> +#define PCIE_MISC_RC_BAR2_CONFIG_LO_SIZE_SHIFT 0x0
> +#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_MASK 0x1f
> +#define PCIE_MISC_RC_BAR3_CONFIG_LO_SIZE_SHIFT 0x0
> +#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_MASK 0x4
> +#define PCIE_MISC_PCIE_CTRL_PCIE_PERSTB_SHIFT 0x2
> +#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_MASK 0x1
> +#define PCIE_MISC_PCIE_CTRL_PCIE_L23_REQUEST_SHIFT 0x0
> +#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_MASK 0x80
> +#define PCIE_MISC_PCIE_STATUS_PCIE_PORT_SHIFT 0x7
> +#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_MASK 0x20
> +#define PCIE_MISC_PCIE_STATUS_PCIE_DL_ACTIVE_SHIFT 0x5
> +#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_MASK 0x10
> +#define PCIE_MISC_PCIE_STATUS_PCIE_PHYLINKUP_SHIFT 0x4
> +#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_MASK 0x40
> +#define PCIE_MISC_PCIE_STATUS_PCIE_LINK_IN_L23_SHIFT 0x6
> +#define PCIE_MISC_REVISION_MAJMIN_MASK 0xffff
> +#define PCIE_MISC_REVISION_MAJMIN_SHIFT 0
> +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK 0xfff00000
> +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_SHIFT 0x14
> +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_MASK 0xfff0
> +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_BASE_SHIFT 0x4
> +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS 0xc
> +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_MASK 0xff
> +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI_BASE_SHIFT 0x0
> +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_MASK 0xff
> +#define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI_LIMIT_SHIFT 0x0
> +#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2
> +#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_SHIFT 0x1
> +#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000
> +#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_SHIFT 0x1b
> +#define PCIE_RGR1_SW_INIT_1_PERST_MASK 0x1
> +#define PCIE_RGR1_SW_INIT_1_PERST_SHIFT 0x0
> +
> +#define BRCM_NUM_PCIE_OUT_WINS 0x4
> +#define BRCM_MAX_SCB 0x4
> +
> +#define BRCM_MSI_TARGET_ADDR_LT_4GB 0x0fffffffcULL
> +#define BRCM_MSI_TARGET_ADDR_GT_4GB 0xffffffffcULL
> +
> +#define BURST_SIZE_128 0
> +#define BURST_SIZE_256 1
> +#define BURST_SIZE_512 2
> +
> +/* Offsets from PCIE_INTR2_CPU_BASE */
> +#define STATUS 0x0
> +#define SET 0x4
> +#define CLR 0x8
> +#define MASK_STATUS 0xc
> +#define MASK_SET 0x10
> +#define MASK_CLR 0x14
> +
> +#define PCIE_BUSNUM_SHIFT 20
> +#define PCIE_SLOT_SHIFT 15
> +#define PCIE_FUNC_SHIFT 12
> +
> +#if defined(__BIG_ENDIAN)
> +#define DATA_ENDIAN 2 /* PCIe->DDR inbound accesses */
> +#define MMIO_ENDIAN 2 /* CPU->PCIe outbound accesses */
> +#else
> +#define DATA_ENDIAN 0
> +#define MMIO_ENDIAN 0
> +#endif
> +
> +#define MDIO_PORT0 0x0
> +#define MDIO_DATA_MASK 0x7fffffff
> +#define MDIO_DATA_SHIFT 0x0
> +#define MDIO_PORT_MASK 0xf0000
> +#define MDIO_PORT_SHIFT 0x16
> +#define MDIO_REGAD_MASK 0xffff
> +#define MDIO_REGAD_SHIFT 0x0
> +#define MDIO_CMD_MASK 0xfff00000
> +#define MDIO_CMD_SHIFT 0x14
> +#define MDIO_CMD_READ 0x1
> +#define MDIO_CMD_WRITE 0x0
> +#define MDIO_DATA_DONE_MASK 0x80000000
> +#define MDIO_RD_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 1 : 0)
> +#define MDIO_WT_DONE(x) (((x) & MDIO_DATA_DONE_MASK) ? 0 : 1)
> +#define SSC_REGS_ADDR 0x1100
> +#define SET_ADDR_OFFSET 0x1f
> +#define SSC_CNTL_OFFSET 0x2
> +#define SSC_CNTL_OVRD_EN_MASK 0x8000
> +#define SSC_CNTL_OVRD_EN_SHIFT 0xf
> +#define SSC_CNTL_OVRD_VAL_MASK 0x4000
> +#define SSC_CNTL_OVRD_VAL_SHIFT 0xe
> +#define SSC_STATUS_OFFSET 0x1
> +#define SSC_STATUS_SSC_MASK 0x400
> +#define SSC_STATUS_SSC_SHIFT 0xa
> +#define SSC_STATUS_PLL_LOCK_MASK 0x800
> +#define SSC_STATUS_PLL_LOCK_SHIFT 0xb
> +
> +#define IDX_ADDR(pcie) \
> + ((pcie)->reg_offsets[EXT_CFG_INDEX])
> +#define DATA_ADDR(pcie) \
> + ((pcie)->reg_offsets[EXT_CFG_DATA])
> +#define PCIE_RGR1_SW_INIT_1(pcie) \
> + ((pcie)->reg_offsets[RGR1_SW_INIT_1])
> +
> +enum {
> + RGR1_SW_INIT_1,
> + EXT_CFG_INDEX,
> + EXT_CFG_DATA,
> +};
> +
> +enum {
> + RGR1_SW_INIT_1_INIT_MASK,
> + RGR1_SW_INIT_1_INIT_SHIFT,
> + RGR1_SW_INIT_1_PERST_MASK,
> + RGR1_SW_INIT_1_PERST_SHIFT,
> +};
> +
> +enum pcie_type {
> + BCM7425,
> + BCM7435,
> + GENERIC,
> + BCM7278,
> +};
> +
> +struct brcm_window {
> + dma_addr_t pcie_addr;
> + phys_addr_t cpu_addr;
> + dma_addr_t size;
> +};
> +
> +/* Internal PCIe Host Controller Information.*/
> +struct brcm_pcie {
> + struct list_head list;
> + struct device *dev;
> + void __iomem *base;
> + struct list_head resources;
> + int irq;
> + struct clk *clk;
> + struct pci_bus *root_bus;
> + struct device_node *dn;
> + int id;
> + bool suspended;
> + int num_out_wins;
> + bool ssc;
> + int gen;
> + struct brcm_window out_wins[BRCM_NUM_PCIE_OUT_WINS];
> + unsigned int rev;
> + const int *reg_offsets;
> + const int *reg_field_info;
> + enum pcie_type type;
> +};
> +
> +struct pcie_cfg_data {
> + const int *reg_field_info;
> + const int *offsets;
> + const enum pcie_type type;
> +};
> +
> +static const int pcie_reg_field_info[] = {
> + [RGR1_SW_INIT_1_INIT_MASK] = 0x2,
> + [RGR1_SW_INIT_1_INIT_SHIFT] = 0x1,
> +};
> +
> +static const int pcie_reg_field_info_bcm7278[] = {
> + [RGR1_SW_INIT_1_INIT_MASK] = 0x1,
> + [RGR1_SW_INIT_1_INIT_SHIFT] = 0x0,
> +};
> +
> +static const int pcie_offset_bcm7425[] = {
> + [RGR1_SW_INIT_1] = 0x8010,
> + [EXT_CFG_INDEX] = 0x8300,
> + [EXT_CFG_DATA] = 0x8304,
> +};
> +
> +static const struct pcie_cfg_data bcm7425_cfg = {
> + .reg_field_info = pcie_reg_field_info,
> + .offsets = pcie_offset_bcm7425,
> + .type = BCM7425,
> +};
> +
> +static const int pcie_offsets[] = {
> + [RGR1_SW_INIT_1] = 0x9210,
> + [EXT_CFG_INDEX] = 0x9000,
> + [EXT_CFG_DATA] = 0x9004,
> +};
> +
> +static const struct pcie_cfg_data bcm7435_cfg = {
> + .reg_field_info = pcie_reg_field_info,
> + .offsets = pcie_offsets,
> + .type = BCM7435,
> +};
> +
> +static const struct pcie_cfg_data generic_cfg = {
> + .reg_field_info = pcie_reg_field_info,
> + .offsets = pcie_offsets,
> + .type = GENERIC,
> +};
> +
> +static const int pcie_offset_bcm7278[] = {
> + [RGR1_SW_INIT_1] = 0xc010,
> + [EXT_CFG_INDEX] = 0x9000,
> + [EXT_CFG_DATA] = 0x9004,
> +};
> +
> +static const struct pcie_cfg_data bcm7278_cfg = {
> + .reg_field_info = pcie_reg_field_info_bcm7278,
> + .offsets = pcie_offset_bcm7278,
> + .type = BCM7278,
> +};
> +
> +static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn,
> + int where);
> +
> +static struct pci_ops brcm_pcie_ops = {
> + .map_bus = brcm_pcie_map_conf,
> + .read = pci_generic_config_read,
> + .write = pci_generic_config_write,
> +};
> +
> +#if defined(CONFIG_MIPS)
> +/* Broadcom MIPs HW implicitly does the swapping if necessary */
> +#define bcm_readl(a) __raw_readl(a)
> +#define bcm_writel(d, a) __raw_writel(d, a)
> +#define bcm_readw(a) __raw_readw(a)
> +#define bcm_writew(d, a) __raw_writew(d, a)
> +#else
> +#define bcm_readl(a) readl(a)
> +#define bcm_writel(d, a) writel(d, a)
> +#define bcm_readw(a) readw(a)
> +#define bcm_writew(d, a) writew(d, a)
> +#endif
> +
> +/*
> + * These macros are designed to sxtract/insert fields to host controller's
> + * register set.
s/are designed to s/ e/ (I assume they actually *do* extract/insert)
> + */
> +#define RD_FLD(base, reg, field) \
> + rd_fld(base + reg, reg##_##field##_MASK, reg##_##field##_SHIFT)
> +#define WR_FLD(base, reg, field, val) \
> + wr_fld(base + reg, reg##_##field##_MASK, reg##_##field##_SHIFT, val)
> +#define WR_FLD_RB(base, reg, field, val) \
> + wr_fld_rb(base + reg, reg##_##field##_MASK, reg##_##field##_SHIFT, val)
> +#define WR_FLD_WITH_OFFSET(base, off, reg, field, val) \
> + wr_fld(base + reg + off, reg##_##field##_MASK, \
> + reg##_##field##_SHIFT, val)
> +#define EXTRACT_FIELD(val, reg, field) \
> + ((val & reg##_##field##_MASK) >> reg##_##field##_SHIFT)
> +#define INSERT_FIELD(val, reg, field, field_val) \
> + ((val & ~reg##_##field##_MASK) | \
> + (reg##_##field##_MASK & (field_val << reg##_##field##_SHIFT)))
> +
> +static struct list_head brcm_pcie = LIST_HEAD_INIT(brcm_pcie);
> +static phys_addr_t scb_size[BRCM_MAX_SCB];
> +static int num_memc;
> +static DEFINE_MUTEX(brcm_pcie_lock);
> +
> +static u32 rd_fld(void __iomem *p, u32 mask, int shift)
> +{
> + return (bcm_readl(p) & mask) >> shift;
> +}
> +
> +static void wr_fld(void __iomem *p, u32 mask, int shift, u32 val)
> +{
> + u32 reg = bcm_readl(p);
> +
> + reg = (reg & ~mask) | ((val << shift) & mask);
> + bcm_writel(reg, p);
> +}
> +
> +static void wr_fld_rb(void __iomem *p, u32 mask, int shift, u32 val)
> +{
> + wr_fld(p, mask, shift, val);
> + (void)bcm_readl(p);
> +}
> +
> +static const char *link_speed_to_str(int s)
> +{
> + switch (s) {
> + case 1:
> + return "2.5";
> + case 2:
> + return "5.0";
> + case 3:
> + return "8.0";
> + default:
> + break;
> + }
> + return "???";
> +}
> +
> +/*
> + * The roundup_pow_of_two() from log2.h invokes
> + * __roundup_pow_of_two(unsigned long), but we really need a
> + * such a function to take a native u64 since unsigned long
> + * is 32 bits on some configurations. So we provide this helper
> + * function below.
> + */
> +static u64 roundup_pow_of_two_64(u64 n)
> +{
> + return 1ULL << fls64(n - 1);
> +}
> +
> +/*
> + * This is to convert the size of the inbound bar region to the
> + * non-liniear values of PCIE_X_MISC_RC_BAR[123]_CONFIG_LO.SIZE
s/bar/BAR/ (This doesn't sound like a BAR in the PCI spec sense, but if
that's what you call it, might as well spell it as the acronym)
s/non-liniear/non-linear/
> + */
> +int encode_ibar_size(u64 size)
> +{
> + int log2_in = ilog2(size);
> +
> + if (log2_in >= 12 && log2_in <= 15)
> + /* Covers 4KB to 32KB (inclusive) */
> + return (log2_in - 12) + 0x1c;
> + else if (log2_in >= 16 && log2_in <= 37)
> + /* Covers 64KB to 32GB, (inclusive) */
> + return log2_in - 15;
> + /* Something is awry so disable */
> + return 0;
> +}
> +
> +static u32 mdio_form_pkt(int port, int regad, int cmd)
> +{
> + u32 pkt = 0;
> +
> + pkt |= (port << MDIO_PORT_SHIFT) & MDIO_PORT_MASK;
> + pkt |= (regad << MDIO_REGAD_SHIFT) & MDIO_REGAD_MASK;
> + pkt |= (cmd << MDIO_CMD_SHIFT) & MDIO_CMD_MASK;
> +
> + return pkt;
> +}
> +
> +/* negative return value indicates error */
> +static int mdio_read(void __iomem *base, u8 port, u8 regad)
> +{
> + int tries;
> + u32 data;
> +
> + bcm_writel(mdio_form_pkt(port, regad, MDIO_CMD_READ),
> + base + PCIE_RC_DL_MDIO_ADDR);
> + bcm_readl(base + PCIE_RC_DL_MDIO_ADDR);
> +
> + data = bcm_readl(base + PCIE_RC_DL_MDIO_RD_DATA);
> + for (tries = 0; !MDIO_RD_DONE(data) && tries < 10; tries++) {
> + udelay(10);
> + data = bcm_readl(base + PCIE_RC_DL_MDIO_RD_DATA);
> + }
> +
> + return MDIO_RD_DONE(data)
> + ? (data & MDIO_DATA_MASK) >> MDIO_DATA_SHIFT
> + : -EIO;
> +}
> +
> +/* negative return value indicates error */
> +static int mdio_write(void __iomem *base, u8 port, u8 regad, u16 wrdata)
> +{
> + int tries;
> + u32 data;
> +
> + bcm_writel(mdio_form_pkt(port, regad, MDIO_CMD_WRITE),
> + base + PCIE_RC_DL_MDIO_ADDR);
> + bcm_readl(base + PCIE_RC_DL_MDIO_ADDR);
> + bcm_writel(MDIO_DATA_DONE_MASK | wrdata,
> + base + PCIE_RC_DL_MDIO_WR_DATA);
> +
> + data = bcm_readl(base + PCIE_RC_DL_MDIO_WR_DATA);
> + for (tries = 0; !MDIO_WT_DONE(data) && tries < 10; tries++) {
> + udelay(10);
> + data = bcm_readl(base + PCIE_RC_DL_MDIO_WR_DATA);
> + }
> +
> + return MDIO_WT_DONE(data) ? 0 : -EIO;
> +}
> +
> +/* configures device for ssc mode; negative return value indicates error */
I guess "ssc" means Spread Spectrum Clocking? Maybe spell out the
first occurrence and spell as acronym in English text?
> +static int set_ssc(void __iomem *base)
> +{
> + int tmp;
> + u16 wrdata;
> + int pll, ssc;
> +
> + tmp = mdio_write(base, MDIO_PORT0, SET_ADDR_OFFSET, SSC_REGS_ADDR);
> + if (tmp < 0)
> + return tmp;
> +
> + tmp = mdio_read(base, MDIO_PORT0, SSC_CNTL_OFFSET);
> + if (tmp < 0)
> + return tmp;
> +
> + wrdata = INSERT_FIELD(tmp, SSC_CNTL_OVRD, EN, 1);
> + wrdata = INSERT_FIELD(wrdata, SSC_CNTL_OVRD, VAL, 1);
> + tmp = mdio_write(base, MDIO_PORT0, SSC_CNTL_OFFSET, wrdata);
> + if (tmp < 0)
> + return tmp;
> +
> + usleep_range(1000, 2000);
> + tmp = mdio_read(base, MDIO_PORT0, SSC_STATUS_OFFSET);
> + if (tmp < 0)
> + return tmp;
> +
> + ssc = EXTRACT_FIELD(tmp, SSC_STATUS, SSC);
> + pll = EXTRACT_FIELD(tmp, SSC_STATUS, PLL_LOCK);
> +
> + return (ssc && pll) ? 0 : -EIO;
> +}
> +
> +/* limits operation to a specific generation (1, 2, or 3) */
> +static void set_gen(void __iomem *base, int gen)
> +{
> + u32 lnkcap = bcm_readl(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP);
> + u16 lnkctl2 = bcm_readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2);
> +
> + lnkcap = (lnkcap & ~PCI_EXP_LNKCAP_SLS) | gen;
> + bcm_writel(lnkcap, base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCAP);
> +
> + lnkctl2 = (lnkctl2 & ~0xf) | gen;
> + bcm_writew(lnkctl2, base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKCTL2);
> +}
> +
> +static void brcm_pcie_set_outbound_win(struct brcm_pcie *pcie,
> + unsigned int win, phys_addr_t cpu_addr,
> + dma_addr_t pcie_addr, dma_addr_t size)
> +{
> + void __iomem *base = pcie->base;
> + phys_addr_t cpu_addr_mb, limit_addr_mb;
> + u32 tmp;
> +
> + /* Set the base of the pcie_addr window */
> + bcm_writel(lower_32_bits(pcie_addr) + MMIO_ENDIAN,
> + base + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LO + (win * 8));
> + bcm_writel(upper_32_bits(pcie_addr),
> + base + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_HI + (win * 8));
> +
> + cpu_addr_mb = cpu_addr >> 20;
> + limit_addr_mb = (cpu_addr + size - 1) >> 20;
> +
> + /* Write the addr base low register */
> + WR_FLD_WITH_OFFSET(base, (win * 4),
> + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT,
> + BASE, cpu_addr_mb);
> + /* Write the addr limit low register */
> + WR_FLD_WITH_OFFSET(base, (win * 4),
> + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT,
> + LIMIT, limit_addr_mb);
> +
> + if (pcie->type != BCM7435 && pcie->type != BCM7425) {
> + /* Write the cpu addr high register */
> + tmp = (u32)(cpu_addr_mb >>
> + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS);
> + WR_FLD_WITH_OFFSET(base, (win * 8),
> + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_HI,
> + BASE, tmp);
> + /* Write the cpu limit high register */
> + tmp = (u32)(limit_addr_mb >>
> + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_NUM_MASK_BITS);
> + WR_FLD_WITH_OFFSET(base, (win * 8),
> + PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI,
> + LIMIT, tmp);
> + }
> +}
> +
> +/* Configuration space read/write support */
> +static int cfg_index(int busnr, int devfn, int reg)
> +{
> + return ((PCI_SLOT(devfn) & 0x1f) << PCIE_SLOT_SHIFT)
> + | ((PCI_FUNC(devfn) & 0x07) << PCIE_FUNC_SHIFT)
> + | (busnr << PCIE_BUSNUM_SHIFT)
> + | (reg & ~3);
> +}
> +
> +static bool brcm_pcie_rc_mode(struct brcm_pcie *pcie)
> +{
> + void __iomem *base = pcie->base;
> + u32 val = bcm_readl(base + PCIE_MISC_PCIE_STATUS);
> +
> + return !!EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_PORT);
> +}
> +
> +static bool brcm_pcie_link_up(struct brcm_pcie *pcie)
> +{
> + void __iomem *base = pcie->base;
> + u32 val = bcm_readl(base + PCIE_MISC_PCIE_STATUS);
> + u32 dla = EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_DL_ACTIVE);
> + u32 plu = EXTRACT_FIELD(val, PCIE_MISC_PCIE_STATUS, PCIE_PHYLINKUP);
> +
> + return (dla && plu) ? true : false;
> +}
> +
> +static bool brcm_pcie_valid_device(struct brcm_pcie *pcie, struct pci_bus *bus,
> + int dev)
> +{
> + if (pci_is_root_bus(bus)) {
> + if (dev > 0)
> + return false;
> + } else {
> + /* If there is no link, then there is no device */
> + if (!brcm_pcie_link_up(pcie))
> + return false;
This is racy, since the link can go down after you check but before
you do the config access. I assume your hardware can deal with a
config access that targets a link that is down?
> + }
> +
> + return true;
> +}
> +
> +static void __iomem *brcm_pcie_map_conf(struct pci_bus *bus, unsigned int devfn,
> + int where)
> +{
> + struct brcm_pcie *pcie = bus->sysdata;
> + void __iomem *base = pcie->base;
> + int idx;
> +
> + if (!brcm_pcie_valid_device(pcie, bus, PCI_SLOT(devfn)))
> + return NULL;
> +
> + /* Accesses to the RC go right to the RC registers */
> + if (pci_is_root_bus(bus))
> + return base + where;
> +
> + /* For devices, write to the config space index register */
> + idx = cfg_index(bus->number, devfn, where);
> + bcm_writel(idx, pcie->base + IDX_ADDR(pcie));
> + return base + DATA_ADDR(pcie) + (where & 0x3);
I guess this is protected by a higher-level config access lock?
> +}
> +
> +static inline void brcm_pcie_bridge_sw_init_set(struct brcm_pcie *pcie,
> + unsigned int val)
> +{
> + unsigned int offset;
> + unsigned int shift = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_SHIFT];
> + u32 mask = pcie->reg_field_info[RGR1_SW_INIT_1_INIT_MASK];
> +
> + if (pcie->type != BCM7278) {
> + wr_fld_rb(pcie->base + PCIE_RGR1_SW_INIT_1(pcie), mask, shift,
> + val);
> + } else if (of_machine_is_compatible("brcm,bcm7278a0")) {
> + /*
> + * The two PCIe instances on 7278a0 are not even consistent with
> + * respect to each other for internal offsets, here we offset
> + * by 0x14000 + RGR1_SW_INIT_1's relative offset to account for
> + * that.
> + */
> + offset = pcie->id ? 0x14010 : pcie->reg_offsets[RGR1_SW_INIT_1];
> + wr_fld_rb(pcie->base + offset, mask, shift, val);
> + } else {
> + wr_fld_rb(pcie->base + PCIE_RGR1_SW_INIT_1(pcie), mask, shift,
> + val);
> + }
> +}
> +
> +static inline void brcm_pcie_perst_set(struct brcm_pcie *pcie,
> + unsigned int val)
> +{
> + if (pcie->type != BCM7278)
> + wr_fld_rb(pcie->base + PCIE_RGR1_SW_INIT_1(pcie),
> + PCIE_RGR1_SW_INIT_1_PERST_MASK,
> + PCIE_RGR1_SW_INIT_1_PERST_SHIFT, val);
> + else
> + /* Assert = 0, de-assert = 1 on 7278 */
> + WR_FLD_RB(pcie->base, PCIE_MISC_PCIE_CTRL, PCIE_PERSTB, !val);
> +}
> +
> +static int brcm_pcie_add_controller(struct brcm_pcie *pcie)
> +{
> + mutex_lock(&brcm_pcie_lock);
> + list_add_tail(&pcie->list, &brcm_pcie);
> + mutex_unlock(&brcm_pcie_lock);
> +
> + return 0;
> +}
> +
> +static void brcm_pcie_remove_controller(struct brcm_pcie *pcie)
> +{
> + struct list_head *pos, *q;
> + struct brcm_pcie *tmp;
> +
> + mutex_lock(&brcm_pcie_lock);
> + list_for_each_safe(pos, q, &brcm_pcie) {
> + tmp = list_entry(pos, struct brcm_pcie, list);
> + if (tmp == pcie) {
> + list_del(pos);
> + if (list_empty(&brcm_pcie))
> + num_memc = 0;
> + break;
> + }
> + }
> + mutex_unlock(&brcm_pcie_lock);
I'm missing something. I don't see that num_memc is ever set to
anything *other* than zero.
This pattern of keeping a list of controllers is highly unusual and
needs some explanation.
> +}
> +
> +static int brcm_pcie_parse_request_of_pci_ranges(struct brcm_pcie *pcie)
> +{
> + struct resource_entry *win;
> + int ret;
> +
> + ret = of_pci_get_host_bridge_resources(pcie->dn, 0, 0xff,
> + &pcie->resources, NULL);
> + if (ret) {
> + dev_err(pcie->dev, "failed to get host resources\n");
> + return ret;
> + }
> +
> + resource_list_for_each_entry(win, &pcie->resources) {
> + struct resource *parent, *res = win->res;
> + dma_addr_t offset = (dma_addr_t)win->offset;
> +
> + if (resource_type(res) == IORESOURCE_IO) {
> + parent = &ioport_resource;
> + } else if (resource_type(res) == IORESOURCE_MEM) {
> + if (pcie->num_out_wins >= BRCM_NUM_PCIE_OUT_WINS) {
> + dev_err(pcie->dev, "too many outbound wins\n");
> + return -EINVAL;
> + }
> + pcie->out_wins[pcie->num_out_wins].cpu_addr
> + = (phys_addr_t)res->start;
> + pcie->out_wins[pcie->num_out_wins].pcie_addr
> + = (dma_addr_t)(res->start
> + - (phys_addr_t)offset);
> + pcie->out_wins[pcie->num_out_wins].size
> + = (dma_addr_t)(res->end - res->start + 1);
> + pcie->num_out_wins++;
> + parent = &iomem_resource;
> + } else {
> + continue;
> + }
> +
> + ret = devm_request_resource(pcie->dev, parent, res);
> + if (ret) {
> + dev_err(pcie->dev, "failed to get res %pR\n", res);
> + return ret;
> + }
> + }
> + return 0;
> +}
> +
> +static int brcm_pcie_setup(struct brcm_pcie *pcie)
> +{
> + void __iomem *base = pcie->base;
> + unsigned int scb_size_val;
> + u64 rc_bar2_size = 0, rc_bar2_offset = 0, total_mem_size = 0;
Unnecessary initializations (at least of rc_bar2_size, I didn't check
the rest).
Add
struct device *dev = pcie->dev;
then use it below.
> + u32 tmp, burst;
> + int i, j, ret, limit;
> + u16 nlw, cls, lnksta;
> + bool ssc_good = false;
> +
> + /* reset the bridge and the endpoint device */
> + /* field: PCIE_BRIDGE_SW_INIT = 1 */
Not sure what these "field: ..." comments mean. Are they for some
automated tool? To a human, it looks like they repeat what the code
does.
> + brcm_pcie_bridge_sw_init_set(pcie, 1);
> +
> + /* field: PCIE_SW_PERST = 1, on 7278, we start de-asserted already */
> + if (pcie->type != BCM7278)
> + brcm_pcie_perst_set(pcie, 1);
> +
> + usleep_range(100, 200);
> +
> + /* take the bridge out of reset */
> + /* field: PCIE_BRIDGE_SW_INIT = 0 */
> + brcm_pcie_bridge_sw_init_set(pcie, 0);
> +
> + WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 0);
> + /* wait for serdes to be stable */
> + usleep_range(100, 200);
> +
> + /* Grab the PCIe hw revision number */
> + tmp = bcm_readl(base + PCIE_MISC_REVISION);
> + pcie->rev = EXTRACT_FIELD(tmp, PCIE_MISC_REVISION, MAJMIN);
> +
> + /* Set SCB_MAX_BURST_SIZE, CFG_READ_UR_MODE, SCB_ACCESS_EN */
> + tmp = INSERT_FIELD(0, PCIE_MISC_MISC_CTRL, SCB_ACCESS_EN, 1);
> + tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, CFG_READ_UR_MODE, 1);
> + burst = (pcie->type == GENERIC || pcie->type == BCM7278)
> + ? BURST_SIZE_512 : BURST_SIZE_256;
> + tmp = INSERT_FIELD(tmp, PCIE_MISC_MISC_CTRL, MAX_BURST_SIZE, burst);
> + bcm_writel(tmp, base + PCIE_MISC_MISC_CTRL);
> +
> + /*
> + * Set up inbound memory view for the EP (called RC_BAR2,
> + * not to be confused with the BARs that are advertised by
> + * the EP).
> + */
> + for (i = 0; i < num_memc; i++)
> + total_mem_size += scb_size[i];
> +
> + /*
> + * The PCIe host controller by design must set the inbound
> + * viewport to be a contiguous arrangement of all of the
> + * system's memory. In addition, its size mut be a power of
> + * two. To further complicate matters, the viewport must
> + * start on a pcie-address that is aligned on a multiple of its
> + * size. If a portion of the viewport does not represent
> + * system memory -- e.g. 3GB of memory requires a 4GB viewport
> + * -- we can map the outbound memory in or after 3GB and even
> + * though the viewport will overlap the outbound memory the
> + * controller will know to send outbound memory downstream and
> + * everything else upstream.
> + */
> + rc_bar2_size = roundup_pow_of_two_64(total_mem_size);
> +
> + /*
> + * Set simple configuration based on memory sizes
> + * only. We always start the viewport at address 0.
> + */
> + rc_bar2_offset = 0;
> +
> + tmp = lower_32_bits(rc_bar2_offset);
> + tmp = INSERT_FIELD(tmp, PCIE_MISC_RC_BAR2_CONFIG_LO, SIZE,
> + encode_ibar_size(rc_bar2_size));
> + bcm_writel(tmp, base + PCIE_MISC_RC_BAR2_CONFIG_LO);
> + bcm_writel(upper_32_bits(rc_bar2_offset),
> + base + PCIE_MISC_RC_BAR2_CONFIG_HI);
> +
> + /* field: SCB0_SIZE, default = 0xf (1 GB) */
> + scb_size_val = scb_size[0]
> + ? ilog2(scb_size[0]) - 15 : 0xf;
> + WR_FLD(base, PCIE_MISC_MISC_CTRL, SCB0_SIZE, scb_size_val);
> +
> + /* field: SCB1_SIZE, default = 0xf (1 GB) */
> + if (num_memc > 1) {
> + scb_size_val = scb_size[1]
> + ? ilog2(scb_size[1]) - 15 : 0xf;
> + WR_FLD(base, PCIE_MISC_MISC_CTRL, SCB1_SIZE, scb_size_val);
> + }
> +
> + /* field: SCB2_SIZE, default = 0xf (1 GB) */
> + if (num_memc > 2) {
> + scb_size_val = scb_size[2]
> + ? ilog2(scb_size[2]) - 15 : 0xf;
> + WR_FLD(base, PCIE_MISC_MISC_CTRL, SCB2_SIZE, scb_size_val);
> + }
> +
> + /* disable the PCIe->GISB memory window (RC_BAR1) */
> + WR_FLD(base, PCIE_MISC_RC_BAR1_CONFIG_LO, SIZE, 0);
> +
> + /* disable the PCIe->SCB memory window (RC_BAR3) */
> + WR_FLD(base, PCIE_MISC_RC_BAR3_CONFIG_LO, SIZE, 0);
> +
> + if (!pcie->suspended) {
> + /* clear any interrupts we find on boot */
> + bcm_writel(0xffffffff, base + PCIE_INTR2_CPU_BASE + CLR);
> + (void)bcm_readl(base + PCIE_INTR2_CPU_BASE + CLR);
> + }
> +
> + /* Mask all interrupts since we are not handling any yet */
> + bcm_writel(0xffffffff, base + PCIE_INTR2_CPU_BASE + MASK_SET);
> + (void)bcm_readl(base + PCIE_INTR2_CPU_BASE + MASK_SET);
> +
> + if (pcie->gen)
> + set_gen(base, pcie->gen);
> +
> + /* take the EP device out of reset */
> + /* field: PCIE_SW_PERST = 0 */
> + brcm_pcie_perst_set(pcie, 0);
<raises eyebrows> Take the *EP* out of reset? The host controller
driver shouldn't be touching an EP directly. Maybe the comment
doesn't match what the code actually does.
> +
> + /*
> + * Give the RC/EP time to wake up, before trying to configure RC.
> + * Intermittently check status for link-up, up to a total of 100ms
> + * when we don't know if the device is there, and up to 1000ms if
> + * we do know the device is there.
> + */
> + limit = pcie->suspended ? 1000 : 100;
> + for (i = 1, j = 0; j < limit && !brcm_pcie_link_up(pcie);
> + j += i, i = i * 2)
> + msleep(i + j > limit ? limit - j : i);
> +
> + if (!brcm_pcie_link_up(pcie)) {
> + dev_info(pcie->dev, "link down\n");
> + return -ENODEV;
> + }
> +
> + if (!brcm_pcie_rc_mode(pcie)) {
> + dev_err(pcie->dev, "PCIe misconfigured; is in EP mode\n");
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < pcie->num_out_wins; i++)
> + brcm_pcie_set_outbound_win(pcie, i, pcie->out_wins[i].cpu_addr,
> + pcie->out_wins[i].pcie_addr,
> + pcie->out_wins[i].size);
> +
> + /*
> + * For config space accesses on the RC, show the right class for
> + * a PCIe-PCIe bridge (the default setting is to be EP mode).
> + */
> + WR_FLD_RB(base, PCIE_RC_CFG_PRIV1_ID_VAL3, CLASS_CODE, 0x060400);
> +
> + if (pcie->ssc) {
> + ret = set_ssc(base);
> + if (ret == 0)
> + ssc_good = true;
> + else
> + dev_err(pcie->dev,
> + "failed attempt to enter ssc mode\n");
> + }
> +
> + lnksta = bcm_readw(base + BRCM_PCIE_CAP_REGS + PCI_EXP_LNKSTA);
> + cls = lnksta & PCI_EXP_LNKSTA_CLS;
> + nlw = (lnksta & PCI_EXP_LNKSTA_NLW) >> PCI_EXP_LNKSTA_NLW_SHIFT;
> + dev_info(pcie->dev, "link up, %s Gbps x%u %s\n", link_speed_to_str(cls),
> + nlw, ssc_good ? "(SSC)" : "(!SSC)");
> +
> + /* PCIe->SCB endian mode for BAR */
> + /* field ENDIAN_MODE_BAR2 = DATA_ENDIAN */
> + WR_FLD_RB(base, PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1,
> + ENDIAN_MODE_BAR2, DATA_ENDIAN);
> +
> + /*
> + * Refclk from RC should be gated with CLKREQ# input when ASPM L0s,L1
> + * is enabled => setting the CLKREQ_DEBUG_ENABLE field to 1.
> + */
> + WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, CLKREQ_DEBUG_ENABLE, 1);
> +
> + return 0;
> +}
> +
> +static void enter_l23(struct brcm_pcie *pcie)
> +{
> + void __iomem *base = pcie->base;
> + int tries, l23;
> +
> + /* assert request for L23 */
> + WR_FLD_RB(base, PCIE_MISC_PCIE_CTRL, PCIE_L23_REQUEST, 1);
> + /* poll L23 status */
> + for (tries = 0, l23 = 0; tries < 1000 && !l23; tries++)
> + l23 = RD_FLD(base, PCIE_MISC_PCIE_STATUS, PCIE_LINK_IN_L23);
> + if (!l23)
> + dev_err(pcie->dev, "failed to enter L23\n");
What does "L23" mean? Some power management thing?
> +}
> +
> +static void turn_off(struct brcm_pcie *pcie)
> +{
> + void __iomem *base = pcie->base;
> +
> + if (brcm_pcie_link_up(pcie))
> + enter_l23(pcie);
> + /* Reset endpoint device */
> + brcm_pcie_perst_set(pcie, 1);
> + /* deassert request for L23 in case it was asserted */
> + WR_FLD_RB(base, PCIE_MISC_PCIE_CTRL, PCIE_L23_REQUEST, 0);
> + /* SERDES_IDDQ = 1 */
> + WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 1);
> + /* Shutdown PCIe bridge */
> + brcm_pcie_bridge_sw_init_set(pcie, 1);
> +}
> +
> +static int brcm_pcie_suspend(struct device *dev)
> +{
> + struct brcm_pcie *pcie = dev_get_drvdata(dev);
> +
> + turn_off(pcie);
> + clk_disable_unprepare(pcie->clk);
> + pcie->suspended = true;
> +
> + return 0;
> +}
> +
> +static int brcm_pcie_resume(struct device *dev)
> +{
> + struct brcm_pcie *pcie = dev_get_drvdata(dev);
> + void __iomem *base;
> + int ret;
> +
> + base = pcie->base;
> + clk_prepare_enable(pcie->clk);
> +
> + /* Take bridge out of reset so we can access the SERDES reg */
Some comments above and below spell it "serdes"; here you spell it
"SERDES".
> + brcm_pcie_bridge_sw_init_set(pcie, 0);
> +
> + /* SERDES_IDDQ = 0 */
> + WR_FLD_RB(base, PCIE_MISC_HARD_PCIE_HARD_DEBUG, SERDES_IDDQ, 0);
> + /* wait for serdes to be stable */
> + usleep_range(100, 200);
> +
> + ret = brcm_pcie_setup(pcie);
> + if (ret)
> + return ret;
> +
> + pcie->suspended = false;
> +
> + return 0;
> +}
> +
> +static void _brcm_pcie_remove(struct brcm_pcie *pcie)
> +{
> + turn_off(pcie);
> + clk_disable_unprepare(pcie->clk);
> + clk_put(pcie->clk);
> + brcm_pcie_remove_controller(pcie);
> +}
> +
> +static int brcm_pcie_remove(struct platform_device *pdev)
> +{
> + struct brcm_pcie *pcie = platform_get_drvdata(pdev);
> +
> + pci_stop_root_bus(pcie->root_bus);
> + pci_remove_root_bus(pcie->root_bus);
> + _brcm_pcie_remove(pcie);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id brcm_pcie_match[] = {
> + { .compatible = "brcm,bcm7425-pcie", .data = &bcm7425_cfg },
> + { .compatible = "brcm,bcm7435-pcie", .data = &bcm7435_cfg },
> + { .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg },
> + { .compatible = "brcm,bcm7445-pcie", .data = &generic_cfg },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, brcm_pcie_match);
> +
> +static int brcm_pcie_probe(struct platform_device *pdev)
> +{
> + struct device_node *dn = pdev->dev.of_node;
> + const struct of_device_id *of_id;
> + const struct pcie_cfg_data *data;
> + int ret;
> + struct brcm_pcie *pcie;
> + struct resource *res;
> + void __iomem *base;
> + u32 tmp;
> + struct pci_host_bridge *bridge;
> + struct pci_bus *child;
> +
> + bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie));
> + if (!bridge)
> + return -ENOMEM;
> +
> + pcie = pci_host_bridge_priv(bridge);
> + INIT_LIST_HEAD(&pcie->resources);
> +
> + of_id = of_match_node(brcm_pcie_match, dn);
> + if (!of_id) {
> + dev_err(&pdev->dev, "failed to look up compatible string\n");
> + return -EINVAL;
> + }
> +
> + if (of_property_read_u32(dn, "dma-ranges", &tmp) == 0) {
> + dev_err(&pdev->dev, "cannot yet handle dma-ranges\n");
> + return -EINVAL;
> + }
> +
> + data = of_id->data;
> + pcie->reg_offsets = data->offsets;
> + pcie->reg_field_info = data->reg_field_info;
> + pcie->type = data->type;
> + pcie->dn = dn;
> + pcie->dev = &pdev->dev;
> +
> + pcie->id = of_get_pci_domain_nr(dn);
Why do you call of_get_pci_domain_nr() directly? No other driver
does.
> + if (pcie->id < 0)
> + return pcie->id;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res)
> + return -EINVAL;
> +
> + base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + pcie->clk = of_clk_get_by_name(dn, "sw_pcie");
> + if (IS_ERR(pcie->clk)) {
> + dev_err(&pdev->dev, "could not get clock\n");
> + pcie->clk = NULL;
> + }
> + pcie->base = base;
> +
> + ret = of_pci_get_max_link_speed(dn);
> + pcie->gen = (ret < 0) ? 0 : ret;
> +
> + pcie->ssc = of_property_read_bool(dn, "brcm,enable-ssc");
> +
> + ret = irq_of_parse_and_map(pdev->dev.of_node, 0);
> + if (ret == 0)
> + /* keep going, as we don't use this intr yet */
> + dev_warn(pcie->dev, "cannot get pcie interrupt\n");
> + else
> + pcie->irq = ret;
> +
> + ret = brcm_pcie_parse_request_of_pci_ranges(pcie);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(pcie->clk);
> + if (ret) {
> + dev_err(&pdev->dev, "could not enable clock\n");
> + return ret;
> + }
> +
> + ret = brcm_pcie_add_controller(pcie);
> + if (ret)
> + return ret;
> +
> + ret = brcm_pcie_setup(pcie);
> + if (ret)
> + goto fail;
> +
> + list_splice_init(&pcie->resources, &bridge->windows);
> + bridge->dev.parent = &pdev->dev;
> + bridge->busnr = 0;
> + bridge->ops = &brcm_pcie_ops;
> + bridge->sysdata = pcie;
> + bridge->map_irq = of_irq_parse_and_map_pci;
> + bridge->swizzle_irq = pci_common_swizzle;
> +
> + ret = pci_scan_root_bus_bridge(bridge);
> + if (ret < 0) {
> + dev_err(pcie->dev, "Scanning root bridge failed");
> + goto fail;
> + }
> +
> + pci_assign_unassigned_bus_resources(bridge->bus);
> + list_for_each_entry(child, &bridge->bus->children, node)
> + pcie_bus_configure_settings(child);
> + pci_bus_add_devices(bridge->bus);
> + platform_set_drvdata(pdev, pcie);
> + pcie->root_bus = bridge->bus;
> +
> + return 0;
> +
> +fail:
> + _brcm_pcie_remove(pcie);
> + return ret;
> +}
> +
> +static const struct dev_pm_ops brcm_pcie_pm_ops = {
> + .suspend_noirq = brcm_pcie_suspend,
> + .resume_noirq = brcm_pcie_resume,
> +};
> +
> +static struct platform_driver __refdata brcm_pcie_driver = {
Why do you need __refdata? There's only only other occurrence in
drivers/pci, and I'm dubious about that one as well.
> + .probe = brcm_pcie_probe,
> + .remove = brcm_pcie_remove,
> + .driver = {
> + .name = "brcm-pcie",
> + .owner = THIS_MODULE,
> + .of_match_table = brcm_pcie_match,
> + .pm = &brcm_pcie_pm_ops,
> + },
> +};
> +
> +module_platform_driver(brcm_pcie_driver);
> +
> +MODULE_LICENSE("GPL");
Copyright notice above says "GPL v2", which is not the same as the
"GPL" here.
> +MODULE_DESCRIPTION("Broadcom STB PCIE RC driver");
> +MODULE_AUTHOR("Broadcom");
> --
> 1.9.0.138.g2de3478
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Powered by blists - more mailing lists