linux-kernel - [PATCH v6] atmel_flexcom: Support resuming after a chip reset

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 12 Dec 2017 17:21:19 +0100
From:   Romain Izard <romain.izard.pro@...il.com>
To:     Lee Jones <lee.jones@...aro.org>,
        Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
        Nicolas Ferre <nicolas.ferre@...rochip.com>
Cc:     linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        Romain Izard <romain.izard.pro@...il.com>
Subject: [PATCH v6] atmel_flexcom: Support resuming after a chip reset

The controller used by a flexcom module is configured at boot, and left
alone after this. In the suspend mode called "backup with self-refresh"
available on SAMA5D2, the chip will resume with most of its registers
reset. In this case, we need to restore the state of the flexcom driver
on resume.

Signed-off-by: Romain Izard <romain.izard.pro@...il.com>
---
Changes in v5:
* extract from the patch series, and send as a standalone patch

Changes in v6:
* Reword the patch title and description
* Rename the internal structure to ddata

 drivers/mfd/atmel-flexcom.c | 63 ++++++++++++++++++++++++++++++++++-----------
 1 file changed, 48 insertions(+), 15 deletions(-)

diff --git a/drivers/mfd/atmel-flexcom.c b/drivers/mfd/atmel-flexcom.c
index 064bde9cff5a..f684a93a3340 100644
--- a/drivers/mfd/atmel-flexcom.c
+++ b/drivers/mfd/atmel-flexcom.c
@@ -39,34 +39,43 @@
 #define FLEX_MR_OPMODE(opmode)	(((opmode) << FLEX_MR_OPMODE_OFFSET) &	\
 				 FLEX_MR_OPMODE_MASK)
 
+struct atmel_flexcom {
+	void __iomem *base;
+	u32 opmode;
+	struct clk *clk;
+};
 
 static int atmel_flexcom_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
-	struct clk *clk;
 	struct resource *res;
-	void __iomem *base;
-	u32 opmode;
+	struct atmel_flexcom *ddata;
 	int err;
 
-	err = of_property_read_u32(np, "atmel,flexcom-mode", &opmode);
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	err = of_property_read_u32(np, "atmel,flexcom-mode", &ddata->opmode);
 	if (err)
 		return err;
 
-	if (opmode < ATMEL_FLEXCOM_MODE_USART ||
-	    opmode > ATMEL_FLEXCOM_MODE_TWI)
+	if (ddata->opmode < ATMEL_FLEXCOM_MODE_USART ||
+	    ddata->opmode > ATMEL_FLEXCOM_MODE_TWI)
 		return -EINVAL;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
+	ddata->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ddata->base))
+		return PTR_ERR(ddata->base);
 
-	clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ddata->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ddata->clk))
+		return PTR_ERR(ddata->clk);
 
-	err = clk_prepare_enable(clk);
+	err = clk_prepare_enable(ddata->clk);
 	if (err)
 		return err;
 
@@ -76,9 +85,9 @@ static int atmel_flexcom_probe(struct platform_device *pdev)
 	 * inaccessible and are read as zero. Also the external I/O lines of the
 	 * Flexcom are muxed to reach the selected device.
 	 */
-	writel(FLEX_MR_OPMODE(opmode), base + FLEX_MR);
+	writel(FLEX_MR_OPMODE(ddata->opmode), ddata->base + FLEX_MR);
 
-	clk_disable_unprepare(clk);
+	clk_disable_unprepare(ddata->clk);
 
 	return devm_of_platform_populate(&pdev->dev);
 }
@@ -89,10 +98,34 @@ static const struct of_device_id atmel_flexcom_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match);
 
+#ifdef CONFIG_PM_SLEEP
+static int atmel_flexcom_resume(struct device *dev)
+{
+	struct atmel_flexcom *ddata = dev_get_drvdata(dev);
+	int err;
+	u32 val;
+
+	err = clk_prepare_enable(ddata->clk);
+	if (err)
+		return err;
+
+	val = FLEX_MR_OPMODE(ddata->opmode),
+	writel(val, ddata->base + FLEX_MR);
+
+	clk_disable_unprepare(ddata->clk);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(atmel_flexcom_pm_ops, NULL,
+			 atmel_flexcom_resume);
+
 static struct platform_driver atmel_flexcom_driver = {
 	.probe	= atmel_flexcom_probe,
 	.driver	= {
 		.name		= "atmel_flexcom",
+		.pm		= &atmel_flexcom_pm_ops,
 		.of_match_table	= atmel_flexcom_of_match,
 	},
 };
-- 
2.14.1