linux-kernel - [PATCH] x86/kconfig: remove residual cmdline param "no-hlt"

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 25 Dec 2017 10:56:31 +0800
From:   "zhenwei.pi" <zhenwei.pi@...runcloud.com>
To:     linux-kernel@...r.kernel.org, x86@...nel.org
Cc:     zhenwei.pi@...runcloud.com, tglx@...utronix.de, hpa@...or.com,
        mingo@...hat.com
Subject: [PATCH] x86/kconfig: remove residual cmdline param "no-hlt"

cmdline param "no-hlt" has been removed in commit
27be457000211a6903968dfce06d5f73f051a217.

Signed-off-by: zhenwei.pi <zhenwei.pi@...runcloud.com>
---
 arch/x86/Kconfig | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d4fc98c..fa9c33c 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2426,19 +2426,18 @@ menuconfig APM
 
 	  1) make sure that you have enough swap space and that it is
 	  enabled.
-	  2) pass the "no-hlt" option to the kernel
-	  3) switch on floating point emulation in the kernel and pass
+	  2) switch on floating point emulation in the kernel and pass
 	  the "no387" option to the kernel
-	  4) pass the "floppy=nodma" option to the kernel
-	  5) pass the "mem=4M" option to the kernel (thereby disabling
+	  3) pass the "floppy=nodma" option to the kernel
+	  4) pass the "mem=4M" option to the kernel (thereby disabling
 	  all but the first 4 MB of RAM)
-	  6) make sure that the CPU is not over clocked.
-	  7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
-	  8) disable the cache from your BIOS settings
-	  9) install a fan for the video card or exchange video RAM
-	  10) install a better fan for the CPU
-	  11) exchange RAM chips
-	  12) exchange the motherboard.
+	  5) make sure that the CPU is not over clocked.
+	  6) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
+	  7) disable the cache from your BIOS settings
+	  8) install a fan for the video card or exchange video RAM
+	  9) install a better fan for the CPU
+	  10) exchange RAM chips
+	  11) exchange the motherboard.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called apm.
-- 
2.7.4