| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 5 Jan 2018 11:23:22 +0800
From: Baoquan He <bhe@...hat.com>
To: linux-kernel@...r.kernel.org
Cc: mingo@...hat.com, tglx@...utronix.de, hpa@...or.com,
x86@...nel.org, douly.fnst@...fujitsu.com, rostedt@...dmis.org,
jgross@...e.com, peterz@...radead.org, uobergfe@...hat.com,
joro@...tes.org
Subject: [PATCH 2/3] x86/apic/kexec: Enable legacy irq mode before jump to
kexec/kdump kernel
In commit
commit 522e66464467 ("x86/apic: Disable I/O APIC before shutdown of the local APIC").
lapic_shutdown() invocation is moved after disable_IO_APIC(). In fact
in disable_IO_APIC(), it not only calls clear_IO_APIC() to disable
IO-APIC, also sets LAPIC and IO-APIC to make system be PIC or
Virtual wire mode. While the above commit putting disable_IO_APIC earlier
causes local APIC completely disabled. So the legacy irq mode is
disabled too before jump to kexec/kdump kernel.
In normal kernel it defaults to be PIC mode or Virtual Wire mode during
system initialization before APIC mode is enabled and this is done by
BIOS initialization. But kexec/kdump kernel won't go through BIOS, so
we should set system as PIC or Virtual Wire mode before jump to kdump
kernel code directly.
Let's take clear_IO_APIC out from disable_IO_APIC and rename
disable_IO_APIC as switch_to_legacy_irq_mode. Then only call clear_IO_APIC
when IO-APIC need be disabled. And call switch_to_legacy_irq_mode before
kexec/kdump jumping.
Signed-off-by: Baoquan He <bhe@...hat.com>
---
arch/x86/include/asm/io_apic.h | 3 ++-
arch/x86/kernel/apic/io_apic.c | 12 ++++--------
arch/x86/kernel/crash.c | 2 +-
arch/x86/kernel/machine_kexec_32.c | 15 +++++----------
arch/x86/kernel/machine_kexec_64.c | 15 +++++----------
arch/x86/kernel/reboot.c | 2 +-
6 files changed, 18 insertions(+), 31 deletions(-)
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index a8834dd546cd..e38ad3863a2c 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -192,7 +192,8 @@ static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
extern void setup_IO_APIC(void);
extern void enable_IO_APIC(void);
-extern void disable_IO_APIC(void);
+extern void clear_IO_APIC(void);
+extern void switch_to_legacy_irq_mode(void);
extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin);
extern void print_IO_APICs(void);
#else /* !CONFIG_X86_IO_APIC */
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 8a7963421460..a47aa915d18c 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -587,7 +587,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
mpc_ioapic_id(apic), pin);
}
-static void clear_IO_APIC(void)
+void clear_IO_APIC(void)
{
int apic, pin;
@@ -1439,15 +1439,11 @@ void native_disable_io_apic(void)
}
/*
- * Not an __init, needed by the reboot code
+ * Not an __init, needed by kexec/kdump code.
+ * For safety IO-APIC and Local APIC need be cleared before this.
*/
-void disable_IO_APIC(void)
+void switch_to_legacy_irq_mode(void)
{
- /*
- * Clear the IO-APIC before rebooting:
- */
- clear_IO_APIC();
-
if (!nr_legacy_irqs())
return;
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 10e74d4778a1..318ffeaaf55a 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -199,7 +199,7 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
#ifdef CONFIG_X86_IO_APIC
/* Prevent crash_kexec() from deadlocking on ioapic_lock. */
ioapic_zap_locks();
- disable_IO_APIC();
+ clear_IO_APIC();
#endif
lapic_shutdown();
#ifdef CONFIG_HPET_TIMER
diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index edfede768688..7ab10d930cc6 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -190,18 +190,13 @@ void machine_kexec(struct kimage *image)
local_irq_disable();
hw_breakpoint_disable();
- if (image->preserve_context) {
#ifdef CONFIG_X86_IO_APIC
- /*
- * We need to put APICs in legacy mode so that we can
- * get timer interrupts in second kernel. kexec/kdump
- * paths already have calls to disable_IO_APIC() in
- * one form or other. kexec jump path also need
- * one.
- */
- disable_IO_APIC();
+ /*
+ * We need to put APICs in legacy mode so that we can
+ * get timer interrupts in second kernel.
+ */
+ switch_to_legacy_irq_mode();
#endif
- }
control_page = page_address(image->control_code_page);
memcpy(control_page, relocate_kernel, KEXEC_CONTROL_CODE_MAX_SIZE);
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 1f790cf9d38f..b5c0cbed6791 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -288,18 +288,13 @@ void machine_kexec(struct kimage *image)
local_irq_disable();
hw_breakpoint_disable();
- if (image->preserve_context) {
#ifdef CONFIG_X86_IO_APIC
- /*
- * We need to put APICs in legacy mode so that we can
- * get timer interrupts in second kernel. kexec/kdump
- * paths already have calls to disable_IO_APIC() in
- * one form or other. kexec jump path also need
- * one.
- */
- disable_IO_APIC();
+ /*
+ * We need to put APICs in legacy mode so that we can
+ * get timer interrupts in second kernel.
+ */
+ switch_to_legacy_irq_mode();
#endif
- }
control_page = page_address(image->control_code_page) + PAGE_SIZE;
memcpy(control_page, relocate_kernel, KEXEC_CONTROL_CODE_MAX_SIZE);
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 2126b9d27c34..b70cc0f38a29 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -666,7 +666,7 @@ void native_machine_shutdown(void)
* Even without the erratum, it still makes sense to quiet IO APIC
* before disabling Local APIC.
*/
- disable_IO_APIC();
+ clear_IO_APIC();
#endif
#ifdef CONFIG_SMP
--
2.5.5
Powered by blists - more mailing lists