linux-kernel - Re: [PATCH 1/2] arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 26 Jan 2018 12:31:39 -0800
From:   Evan Green <evgreen@...omium.org>
To:     Rajendra Nayak <rnayak@...eaurora.org>
Cc:     Andy Gross <andy.gross@...aro.org>, linux-kernel@...r.kernel.org,
        linux-arm-msm@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org
Subject: Re: [PATCH 1/2] arm64: dts: sdm845: Add minimal dts/dtsi files for
 sdm845 SoC and MTP

Hi Rajendra,

On Thu, Jan 25, 2018 at 8:32 AM, Rajendra Nayak <rnayak@...eaurora.org> wrote:
> Add a skeletal sdm845 SoC dtsi and MTP board dts/dtsi files
>
> Signed-off-by: Rajendra Nayak <rnayak@...eaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/Makefile        |   1 +
>  arch/arm64/boot/dts/qcom/sdm845-mtp.dts  |  13 ++
>  arch/arm64/boot/dts/qcom/sdm845-mtp.dtsi |  11 ++
>  arch/arm64/boot/dts/qcom/sdm845.dtsi     | 308 +++++++++++++++++++++++++++++++
>  4 files changed, 333 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sdm845-mtp.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sdm845-mtp.dtsi
>  create mode 100644 arch/arm64/boot/dts/qcom/sdm845.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 55ec5ee7f7e8..c57701bed084 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -6,3 +6,4 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += msm8992-bullhead-rev-101.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += msm8994-angler-rev-101.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += msm8996-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb

Minor nit: This should be a tab before the += to be consistent.

(Unfortunately I don't have the expertise quite yet to comment on the
rest of this).

-Evan