linux-kernel - Re: [PATCH] usb: musb: fix enumeration after resume

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 6 Feb 2018 10:47:25 -0800
From:   Tony Lindgren <tony@...mide.com>
To:     Andreas Kemnade <andreas@...nade.info>
Cc:     b-liu@...com, gregkh@...uxfoundation.org,
        linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        Discussions about the Letux Kernel 
        <letux-kernel@...nphoenux.org>, linux-omap@...r.kernel.org
Subject: Re: [PATCH] usb: musb: fix enumeration after resume

* Andreas Kemnade <andreas@...nade.info> [180127 08:34]:
> On dm3730 there are enumeration problems after resume.
> Investigation led to the cause that the MUSB_POWER_SOFTCONN
> bit is not set. If it was set before suspend (because it
> was enabled via musb_pullup()), it is set in
> musb_restore_context() so the pullup is enabled. But then
> musb_start() is called which overwrites MUSB_POWER and
> therefore disables MUSB_POWER_SOFTCONN, so no pullup is
> enabled and the device is not enumerated.

I just gave this patch a quick try and things seem to behave
for me from PM point of view:

Tested-by: Tony Lindgren <tony@...mide.com>

Unrelated to this patch, I also noticed that we now somehow
higher idle power consumption initially when musb modules are
loaded. It used to idle after that but now to get things to
idle I had to plug and unplug a USB device once to the musb
port.

Regards,

Tony