| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 13 Feb 2018 17:48:57 +0000
From: Kieran Bingham <kbingham@...nel.org>
To: linux-kernel@...r.kernel.org, linux-media@...r.kernel.org,
dri-devel@...ts.freedesktop.org, linux-renesas-soc@...r.kernel.org
Cc: Kieran Bingham <kieran.bingham@...asonboard.com>,
Jean-Michel Hautbois <jean-michel.hautbois@...alys.com>,
Sergei Shtylyov <sergei.shtylyov@...entembedded.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Kieran Bingham <kieran.bingham+renesas@...asonboard.com>
Subject: [PATCH v4 5/5] drm: adv7511: Add support for i2c_new_secondary_device
From: Kieran Bingham <kieran.bingham+renesas@...asonboard.com>
The ADV7511 has four 256-byte maps that can be accessed via the main I2C
ports. Each map has it own I2C address and acts as a standard slave
device on the I2C bus.
Allow a device tree node to override the default addresses so that
address conflicts with other devices on the same bus may be resolved at
the board description level.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@...asonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
---
v2:
- Update missing edid-i2c address setting
- Split out DT bindings
- Rename and move the I2C default addresses to their own section
v3:
- No change
v4:
- Change registration order of packet/cec to fix error path and
simplify code change.
- Collect Laurent's RB tag
drivers/gpu/drm/bridge/adv7511/adv7511.h | 6 ++++
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 42 ++++++++++++++++++----------
2 files changed, 33 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
index d034b2cb5eee..73d8ccb97742 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -93,6 +93,11 @@
#define ADV7511_REG_CHIP_ID_HIGH 0xf5
#define ADV7511_REG_CHIP_ID_LOW 0xf6
+/* Hardware defined default addresses for I2C register maps */
+#define ADV7511_CEC_I2C_ADDR_DEFAULT 0x3c
+#define ADV7511_EDID_I2C_ADDR_DEFAULT 0x3f
+#define ADV7511_PACKET_I2C_ADDR_DEFAULT 0x38
+
#define ADV7511_CSC_ENABLE BIT(7)
#define ADV7511_CSC_UPDATE_MODE BIT(5)
@@ -321,6 +326,7 @@ enum adv7511_type {
struct adv7511 {
struct i2c_client *i2c_main;
struct i2c_client *i2c_edid;
+ struct i2c_client *i2c_packet;
struct i2c_client *i2c_cec;
struct regmap *regmap;
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index efa29db5fc2b..802bc433f54a 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -586,7 +586,7 @@ static int adv7511_get_modes(struct adv7511 *adv7511,
/* Reading the EDID only works if the device is powered */
if (!adv7511->powered) {
unsigned int edid_i2c_addr =
- (adv7511->i2c_main->addr << 1) + 4;
+ (adv7511->i2c_edid->addr << 1);
__adv7511_power_on(adv7511);
@@ -969,10 +969,10 @@ static int adv7511_init_cec_regmap(struct adv7511 *adv)
{
int ret;
- adv->i2c_cec = i2c_new_dummy(adv->i2c_main->adapter,
- adv->i2c_main->addr - 1);
+ adv->i2c_cec = i2c_new_secondary_device(adv->i2c_main, "cec",
+ ADV7511_CEC_I2C_ADDR_DEFAULT);
if (!adv->i2c_cec)
- return -ENOMEM;
+ return -EINVAL;
i2c_set_clientdata(adv->i2c_cec, adv);
adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
@@ -1082,8 +1082,6 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
struct adv7511_link_config link_config;
struct adv7511 *adv7511;
struct device *dev = &i2c->dev;
- unsigned int main_i2c_addr = i2c->addr << 1;
- unsigned int edid_i2c_addr = main_i2c_addr + 4;
unsigned int val;
int ret;
@@ -1153,23 +1151,34 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
if (ret)
goto uninit_regulators;
- regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
- regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
- main_i2c_addr - 0xa);
- regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
- main_i2c_addr - 2);
-
adv7511_packet_disable(adv7511, 0xffff);
- adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
+ adv7511->i2c_edid = i2c_new_secondary_device(i2c, "edid",
+ ADV7511_EDID_I2C_ADDR_DEFAULT);
if (!adv7511->i2c_edid) {
- ret = -ENOMEM;
+ ret = -EINVAL;
goto uninit_regulators;
}
+ regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR,
+ adv7511->i2c_edid->addr << 1);
+
+ adv7511->i2c_packet = i2c_new_secondary_device(i2c, "packet",
+ ADV7511_PACKET_I2C_ADDR_DEFAULT);
+ if (!adv7511->i2c_packet) {
+ ret = -EINVAL;
+ goto err_i2c_unregister_edid;
+ }
+
+ regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
+ adv7511->i2c_packet->addr << 1);
+
ret = adv7511_init_cec_regmap(adv7511);
if (ret)
- goto err_i2c_unregister_edid;
+ goto err_i2c_unregister_packet;
+
+ regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
+ adv7511->i2c_cec->addr << 1);
INIT_WORK(&adv7511->hpd_work, adv7511_hpd_work);
@@ -1207,6 +1216,8 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
i2c_unregister_device(adv7511->i2c_cec);
if (adv7511->cec_clk)
clk_disable_unprepare(adv7511->cec_clk);
+err_i2c_unregister_packet:
+ i2c_unregister_device(adv7511->i2c_packet);
err_i2c_unregister_edid:
i2c_unregister_device(adv7511->i2c_edid);
uninit_regulators:
@@ -1233,6 +1244,7 @@ static int adv7511_remove(struct i2c_client *i2c)
cec_unregister_adapter(adv7511->cec_adap);
+ i2c_unregister_device(adv7511->i2c_packet);
i2c_unregister_device(adv7511->i2c_edid);
return 0;
--
2.7.4
Powered by blists - more mailing lists