root@ubuntu:/home/ubuntu# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.14 (lnxbuild@bait-qsvbuild-13-bldr-lnx) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02)) #2 SMP Thu Feb 15 20:32:17 MST 2018 [ 0.000000] Boot CPU: AArch64 Processor [510f8000] [ 0.000000] earlycon: pl11 at MMIO32 0x000000ff78ed1000 (options '') [ 0.000000] bootconsole [pl11] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: EFI v2.60 by Qualcomm [ 0.000000] efi: ACPI 2.0=0x8bd0000 PROP=0xdf695c8 SMBIOS 3.0=0x4c20000 ESRT=0xa4c1c18 MEMATTR=0xa401018 RNG=0xdf16a98 [ 0.000000] random: fast init done [ 0.000000] efi: seeding entropy pool [ 0.000000] esrt: Reserving ESRT space from 0x000000000a4c1c18 to 0x000000000a4c1cf0. [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x0000000008BD0000 000024 (v02 QCOM ) [ 0.000000] ACPI: XSDT 0x0000000008BC0000 000094 (v01 QCOM QDF2400 00000000 QCOM 00000001) [ 0.000000] ACPI: FACP 0x0000000008880000 000114 (v06 QCOM QDF2400 00000000 INTL 20150515) [ 0.000000] ACPI: DSDT 0x00000000088A0000 0332B6 (v02 QCOM QDF2400 00000004 INTL 20150515) [ 0.000000] ACPI: DBG2 0x0000000008930000 000072 (v00 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: IORT 0x0000000008910000 000D40 (v00 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: TPM2 0x0000000008900000 000040 (v04 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: BERT 0x00000000088E0000 000030 (v01 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: EINJ 0x0000000008890000 000150 (v01 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: GTDT 0x0000000008870000 00007C (v02 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: PCCT 0x0000000008850000 0000AC (v01 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: SPMI 0x0000000008840000 000041 (v04 QCOM QDF2400 00000000 INTL 20150515) [ 0.000000] ACPI: PPTT 0x00000000083B0000 000736 (v01 QCOM QDF2400 00000002 INTL 20150515) [ 0.000000] ACPI: APIC 0x00000000088F0000 000ED0 (v04 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: HEST 0x0000000008920000 000288 (v01 QCOM QDF2400 00000001 INTL 20150515) [ 0.000000] ACPI: MCFG 0x0000000008860000 00005C (v01 QCOM QDF2400 00000001 QCOM 00000001) [ 0.000000] ACPI: SPCR 0x0000000004C00000 000050 (v04 QCOM QDF2400 00000001 QCOM 00000001) [ 0.000000] ACPI: SPCR: console: pl011,mmio32,0xff78ed1000,115200 [ 0.000000] ACPI: NUMA: Failed to initialise from firmware [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000017ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x17fb65be80-0x17fb65efff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000017ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x000000000021ffff] [ 0.000000] node 0: [mem 0x0000000000820000-0x000000000307ffff] [ 0.000000] node 0: [mem 0x0000000003080000-0x000000000308ffff] [ 0.000000] node 0: [mem 0x0000000003090000-0x00000000031fffff] [ 0.000000] node 0: [mem 0x0000000003200000-0x00000000033fffff] [ 0.000000] node 0: [mem 0x0000000003410000-0x0000000004c0ffff] [ 0.000000] node 0: [mem 0x0000000004c10000-0x0000000004c2ffff] [ 0.000000] node 0: [mem 0x0000000004c30000-0x0000000004c3dfff] [ 0.000000] node 0: [mem 0x0000000004c3e000-0x0000000004c41fff] [ 0.000000] node 0: [mem 0x0000000004c42000-0x0000000004c4cfff] [ 0.000000] node 0: [mem 0x0000000004c4d000-0x0000000007c61fff] [ 0.000000] node 0: [mem 0x0000000007c62000-0x0000000007d6ffff] [ 0.000000] node 0: [mem 0x0000000007d70000-0x0000000007eeffff] [ 0.000000] node 0: [mem 0x0000000007ef0000-0x0000000007f0ffff] [ 0.000000] node 0: [mem 0x0000000007f10000-0x0000000007faffff] [ 0.000000] node 0: [mem 0x0000000007fb0000-0x0000000008310fff] [ 0.000000] node 0: [mem 0x0000000008311000-0x0000000008316fff] [ 0.000000] node 0: [mem 0x0000000008317000-0x00000000083c0fff] [ 0.000000] node 0: [mem 0x00000000083c1000-0x00000000083c6fff] [ 0.000000] node 0: [mem 0x00000000083c7000-0x00000000083effff] [ 0.000000] node 0: [mem 0x00000000083f0000-0x00000000085dffff] [ 0.000000] node 0: [mem 0x00000000085e0000-0x00000000085e0fff] [ 0.000000] node 0: [mem 0x00000000085e1000-0x00000000085e3fff] [ 0.000000] node 0: [mem 0x00000000085e4000-0x00000000085fffff] [ 0.000000] node 0: [mem 0x0000000008600000-0x000000000860ffff] [ 0.000000] node 0: [mem 0x0000000008610000-0x000000000863ffff] [ 0.000000] node 0: [mem 0x0000000008640000-0x00000000087affff] [ 0.000000] node 0: [mem 0x00000000087b0000-0x0000000008940fff] [ 0.000000] node 0: [mem 0x0000000008941000-0x0000000008943fff] [ 0.000000] node 0: [mem 0x0000000008944000-0x000000000896ffff] [ 0.000000] node 0: [mem 0x0000000008970000-0x0000000008a0ffff] [ 0.000000] node 0: [mem 0x0000000008a10000-0x0000000008a7ffff] [ 0.000000] node 0: [mem 0x0000000008a80000-0x0000000008bbffff] [ 0.000000] node 0: [mem 0x0000000008bc0000-0x0000000008bdffff] [ 0.000000] node 0: [mem 0x0000000008be0000-0x0000000008f02fff] [ 0.000000] node 0: [mem 0x0000000008f03000-0x000000000deeffff] [ 0.000000] node 0: [mem 0x000000000def0000-0x000000000df1ffff] [ 0.000000] node 0: [mem 0x000000000df20000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000010800000-0x0000000017feffff] [ 0.000000] node 0: [mem 0x000000001c000000-0x000000001c00ffff] [ 0.000000] node 0: [mem 0x000000001c010000-0x000000001c7fffff] [ 0.000000] node 0: [mem 0x000000001c810000-0x000000007efbffff] [ 0.000000] node 0: [mem 0x000000007efc0000-0x000000007efdffff] [ 0.000000] node 0: [mem 0x000000007efe0000-0x000000007efeffff] [ 0.000000] node 0: [mem 0x000000007eff0000-0x000000007effffff] [ 0.000000] node 0: [mem 0x000000007f000000-0x000000007fffffff] [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] node 0: [mem 0x00000000c0000000-0x00000017ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000017ffffffff] [ 0.000000] On node 0 totalpages: 25145296 [ 0.000000] DMA zone: 16376 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 1028048 pages, LIFO batch:31 [ 0.000000] Normal zone: 376832 pages used for memmap [ 0.000000] Normal zone: 24117248 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from ACPI. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] percpu: Embedded 28 pages/cpu @ffffb2759acf8000 s77592 r8192 d28904 u114688 [ 0.000000] pcpu-alloc: s77592 r8192 d28904 u114688 alloc=28*4096 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 [ 0.000000] pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0] 22 [0] 23 [ 0.000000] pcpu-alloc: [0] 24 [0] 25 [0] 26 [0] 27 [0] 28 [0] 29 [0] 30 [0] 31 [ 0.000000] pcpu-alloc: [0] 32 [0] 33 [0] 34 [0] 35 [0] 36 [0] 37 [0] 38 [0] 39 [ 0.000000] pcpu-alloc: [0] 40 [0] 41 [0] 42 [0] 43 [0] 44 [0] 45 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for Qualcomm Technologies Falkor erratum 1003 [ 0.000000] CPU features: enabling workaround for Qualcomm Technologies Falkor erratum 1009 [ 0.000000] CPU features: enabling workaround for Qualcomm Technologies Falkor erratum 1029 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 24752088 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: \EFI\BOOT\Image user_debug=31 loglevel=9 uefi_debug e1000e.IntMode=1 pci=pcie_bus_safe pcie_aspm.policy=default cpuidle.off=0 rootwait rw root=PARTUUID=76ec3f97-3414-4896-a317-340ffa63adc6 rootfstype=ext4 initrd=initramfs.img earlycon=pl011,mmio32,0xff78ed1000 "" "" "" "" "" "" "" "" [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 184320 bytes [ 0.000000] log_buf_len min size: 16384 bytes [ 0.000000] log_buf_len: 262144 bytes [ 0.000000] early log buf free: 7596(46%) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] software IO TLB [mem 0xfbffe000-0xffffe000] (64MB) mapped at [ffffb25efbffe000-ffffb25effffdfff] [ 0.000000] Memory: 97723812K/100581184K available (10556K kernel code, 1596K rwdata, 4236K rodata, 5312K init, 970K bss, 2857372K reserved, 0K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB) [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB) [ 0.000000] .text : 0xffff38c5d1e80000 - 0xffff38c5d28d0000 ( 10560 KB) [ 0.000000] .rodata : 0xffff38c5d28d0000 - 0xffff38c5d2d00000 ( 4288 KB) [ 0.000000] .init : 0xffff38c5d2d00000 - 0xffff38c5d3230000 ( 5312 KB) [ 0.000000] .data : 0xffff38c5d3230000 - 0xffff38c5d33bf200 ( 1597 KB) [ 0.000000] .bss : 0xffff38c5d33bf200 - 0xffff38c5d34b1c80 ( 971 KB) [ 0.000000] fixed : 0xffff7dfffe7f9000 - 0xffff7dfffec00000 ( 4124 KB) [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB) [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum) [ 0.000000] 0xffff7ec978008000 - 0xffff7ec9d8000000 ( 1535 MB actual) [ 0.000000] memory : 0xffffb25e00200000 - 0xffffb27600000000 ( 98302 MB) [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=46, Nodes=1 [ 0.000000] ftrace: allocating 37871 entries in 148 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=46. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=46 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: VLPI support, no direct LPI support [ 0.000000] ACPI: SRAT not present [ 0.000000] ITS [mem 0xff7efe0000-0xff7effffff] [ 0.000000] ITS@0x000000ff7efe0000: Using ITS number 0 [ 0.000000] GIC: enabling workaround for ITS: QDF2400 erratum 0065 [ 0.000000] ITS@0x000000ff7efe0000: allocated 524288 Devices @179a000000 (indirect, esz 8, psz 64K, shr 1) [ 0.000000] ITS@0x000000ff7efe0000: allocated 8192 Interrupt Collections @179a950000 (flat, esz 8, psz 64K, shr 1) [ 0.000000] ITS@0x000000ff7efe0000: allocated 65536 Virtual CPUs @179a980000 (flat, esz 8, psz 64K, shr 1) [ 0.000000] GIC: using LPI property table @0x000000179a960000 [ 0.000000] ITS: Allocated 1792 chunks for LPIs [ 0.000000] ITS: Allocated DevID ffffffff as GICv4 proxy device (64 slots) [ 0.000000] ITS: Enabling GICv4 support [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000ff7f000000 [ 0.000000] CPU0: using LPI pending table @0x000000179aa00000 [ 0.000000] arch_timer: cp15 timer(s) running at 20.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x49cd42e20, max_idle_ns: 440795202120 ns [ 0.000001] sched_clock: 56 bits at 20MHz, resolution 50ns, wraps every 4398046511100ns [ 0.008610] Console: colour dummy device 80x25 [ 0.013377] Remapping and enabling EFI services. [ 0.018308] EFI remap 0x0000000000200000 => 000059efedb70000 [ 0.024530] EFI remap 0x0000000003080000 => 000059efedb90000 [ 0.030752] EFI remap 0x0000000004c10000 => 000059efedba0000 [ 0.036980] EFI remap 0x0000000007d70000 => 000059efedbc0000 [ 0.043201] EFI remap 0x0000000007e00000 => 000059efedc50000 [ 0.049429] EFI remap 0x0000000007e10000 => 000059efedc60000 [ 0.055651] EFI remap 0x0000000007ea0000 => 000059efedcf0000 [ 0.061874] EFI remap 0x0000000007ec0000 => 000059efedd10000 [ 0.068100] EFI remap 0x0000000007f10000 => 000059efedd40000 [ 0.074321] EFI remap 0x0000000007f70000 => 000059efedda0000 [ 0.080544] EFI remap 0x0000000007f80000 => 000059efeddb0000 [ 0.086770] EFI remap 0x00000000083f0000 => 000059efedde0000 [ 0.092991] EFI remap 0x0000000008450000 => 000059efede40000 [ 0.099218] EFI remap 0x0000000008460000 => 000059efede50000 [ 0.105439] EFI remap 0x00000000084f0000 => 000059efedee0000 [ 0.111667] EFI remap 0x0000000008500000 => 000059efedef0000 [ 0.117889] EFI remap 0x0000000008590000 => 000059efedf80000 [ 0.124112] EFI remap 0x00000000085b0000 => 000059efedfa0000 [ 0.130338] EFI remap 0x0000000008640000 => 000059efedfd0000 [ 0.136560] EFI remap 0x00000000086a0000 => 000059efee030000 [ 0.142789] EFI remap 0x00000000086b0000 => 000059efee040000 [ 0.149010] EFI remap 0x0000000008760000 => 000059efee0f0000 [ 0.155234] EFI remap 0x0000000008770000 => 000059efee100000 [ 0.161459] EFI remap 0x0000000008970000 => 000059efee140000 [ 0.167680] EFI remap 0x00000000089d0000 => 000059efee1a0000 [ 0.173903] EFI remap 0x00000000089e0000 => 000059efee1b0000 [ 0.180128] EFI remap 0x0000000008a80000 => 000059efee1e0000 [ 0.186350] EFI remap 0x0000000008ae0000 => 000059efee240000 [ 0.192577] EFI remap 0x0000000008af0000 => 000059efee250000 [ 0.198799] EFI remap 0x0000000008b80000 => 000059efee2e0000 [ 0.205021] EFI remap 0x0000000008b90000 => 000059efee2f0000 [ 0.211247] EFI remap 0x0000000008be0000 => 000059efee320000 [ 0.217468] EFI remap 0x0000000008c40000 => 000059efee380000 [ 0.223696] EFI remap 0x0000000008c50000 => 000059efee390000 [ 0.229917] EFI remap 0x0000000008ce0000 => 000059efee420000 [ 0.236144] EFI remap 0x0000000008cf0000 => 000059efee430000 [ 0.242366] EFI remap 0x0000000008d80000 => 000059efee4c0000 [ 0.248593] EFI remap 0x0000000008d90000 => 000059efee4d0000 [ 0.254814] EFI remap 0x0000000008e20000 => 000059efee560000 [ 0.261041] EFI remap 0x0000000008e30000 => 000059efee570000 [ 0.267263] EFI remap 0x0000000008ec0000 => 000059efee600000 [ 0.273486] EFI remap 0x0000000008ed0000 => 000059efee610000 [ 0.279709] EFI remap 0x000000000def0000 => 000059efee640000 [ 0.285931] EFI remap 0x000000001c000000 => 000059efee670000 [ 0.292153] EFI remap 0x000000ff70030000 => 000059efee680000 [ 0.298374] EFI remap 0x000000ff70400000 => 000059efee690000 [ 0.304595] EFI remap 0x000000ff79000000 => 000059efee800000 [ 0.310817] EFI remap 0x000000ff79420000 => 000059efeec00000 [ 0.317038] EFI remap 0x000000ff7ac00000 => 000059efeee00000 [ 0.323343] Calibrating delay loop (skipped), value calculated using timer frequency.. 40.00 BogoMIPS (lpj=80000) [ 0.334296] pid_max: default: 47104 minimum: 368 [ 0.339229] ACPI: Core revision 20170728 [ 0.379878] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.386698] Security Framework initialized [ 0.391064] Yama: becoming mindful. [ 0.394782] SELinux: Disabled at boot. [ 0.398869] AppArmor: AppArmor disabled by boot time parameter [ 0.408660] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes) [ 0.418334] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.426202] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.433782] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.442234] ASID allocator initialised with 32768 entries [ 0.448017] Hierarchical SRCU implementation. [ 0.453046] PCI/MSI: ITS@0xff7efe0000 domain created [ 0.458349] Platform MSI: ITS@0xff7efe0000 domain created [ 0.464440] smp: Bringing up secondary CPUs ... [ 0.470149] Detected PIPT I-cache on CPU1 [ 0.470159] GICv3: CPU1: found redistributor 100 region 1:0x000000ff7f080000 [ 0.470167] CPU1: using LPI pending table @0x0000001793fa0000 [ 0.470189] CPU1: Booted secondary processor [510f8000] [ 0.471143] Detected PIPT I-cache on CPU2 [ 0.471152] GICv3: CPU2: found redistributor 200 region 2:0x000000ff7f100000 [ 0.471161] CPU2: using LPI pending table @0x0000001793ff0000 [ 0.471181] CPU2: Booted secondary processor [510f8000] [ 0.472108] Detected PIPT I-cache on CPU3 [ 0.472117] GICv3: CPU3: found redistributor 300 region 3:0x000000ff7f180000 [ 0.472126] CPU3: using LPI pending table @0x0000001793840000 [ 0.472146] CPU3: Booted secondary processor [510f8000] [ 0.473038] Detected PIPT I-cache on CPU4 [ 0.473048] GICv3: CPU4: found redistributor 400 region 4:0x000000ff7f200000 [ 0.473056] CPU4: using LPI pending table @0x0000001793890000 [ 0.473076] CPU4: Booted secondary processor [510f8000] [ 0.474018] Detected PIPT I-cache on CPU5 [ 0.474029] GICv3: CPU5: found redistributor 500 region 5:0x000000ff7f280000 [ 0.474037] CPU5: using LPI pending table @0x00000017938d0000 [ 0.474058] CPU5: Booted secondary processor [510f8000] [ 0.474947] Detected PIPT I-cache on CPU6 [ 0.474958] GICv3: CPU6: found redistributor 700 region 6:0x000000ff7f380000 [ 0.474966] CPU6: using LPI pending table @0x0000001793930000 [ 0.474987] CPU6: Booted secondary processor [510f8000] [ 0.475863] Detected PIPT I-cache on CPU7 [ 0.475874] GICv3: CPU7: found redistributor 800 region 7:0x000000ff7f400000 [ 0.475882] CPU7: using LPI pending table @0x0000001793980000 [ 0.475903] CPU7: Booted secondary processor [510f8000] [ 0.476829] Detected PIPT I-cache on CPU8 [ 0.476842] GICv3: CPU8: found redistributor 900 region 8:0x000000ff7f480000 [ 0.476851] CPU8: using LPI pending table @0x00000017939c0000 [ 0.476873] CPU8: Booted secondary processor [510f8000] [ 0.477804] Detected PIPT I-cache on CPU9 [ 0.477817] GICv3: CPU9: found redistributor a00 region 9:0x000000ff7f500000 [ 0.477826] CPU9: using LPI pending table @0x0000001793a30000 [ 0.477848] CPU9: Booted secondary processor [510f8000] [ 0.478718] Detected PIPT I-cache on CPU10 [ 0.478732] GICv3: CPU10: found redistributor b00 region 10:0x000000ff7f580000 [ 0.478740] CPU10: using LPI pending table @0x0000001793a70000 [ 0.478763] CPU10: Booted secondary processor [510f8000] [ 0.479615] Detected PIPT I-cache on CPU11 [ 0.479629] GICv3: CPU11: found redistributor c00 region 11:0x000000ff7f600000 [ 0.479637] CPU11: using LPI pending table @0x0000001793ab0000 [ 0.479660] CPU11: Booted secondary processor [510f8000] [ 0.480590] Detected PIPT I-cache on CPU12 [ 0.480605] GICv3: CPU12: found redistributor d00 region 12:0x000000ff7f680000 [ 0.480613] CPU12: using LPI pending table @0x0000001793b20000 [ 0.480637] CPU12: Booted secondary processor [510f8000] [ 0.481551] Detected PIPT I-cache on CPU13 [ 0.481566] GICv3: CPU13: found redistributor e00 region 13:0x000000ff7f700000 [ 0.481575] CPU13: using LPI pending table @0x0000001793b60000 [ 0.481598] CPU13: Booted secondary processor [510f8000] [ 0.482448] Detected PIPT I-cache on CPU14 [ 0.482463] GICv3: CPU14: found redistributor f00 region 14:0x000000ff7f780000 [ 0.482472] CPU14: using LPI pending table @0x0000001793ba0000 [ 0.482496] CPU14: Booted secondary processor [510f8000] [ 0.483376] Detected PIPT I-cache on CPU15 [ 0.483392] GICv3: CPU15: found redistributor 1000 region 15:0x000000ff7f800000 [ 0.483401] CPU15: using LPI pending table @0x0000001793400000 [ 0.483423] CPU15: Booted secondary processor [510f8000] [ 0.484351] Detected PIPT I-cache on CPU16 [ 0.484367] GICv3: CPU16: found redistributor 1100 region 16:0x000000ff7f880000 [ 0.484376] CPU16: using LPI pending table @0x0000001793450000 [ 0.484400] CPU16: Booted secondary processor [510f8000] [ 0.485338] Detected PIPT I-cache on CPU17 [ 0.485355] GICv3: CPU17: found redistributor 1200 region 17:0x000000ff7f900000 [ 0.485363] CPU17: using LPI pending table @0x0000001793490000 [ 0.485387] CPU17: Booted secondary processor [510f8000] [ 0.486274] Detected PIPT I-cache on CPU18 [ 0.486290] GICv3: CPU18: found redistributor 1300 region 18:0x000000ff7f980000 [ 0.486299] CPU18: using LPI pending table @0x0000001793500000 [ 0.486323] CPU18: Booted secondary processor [510f8000] [ 0.487220] Detected PIPT I-cache on CPU19 [ 0.487237] GICv3: CPU19: found redistributor 1400 region 19:0x000000ff7fa00000 [ 0.487246] CPU19: using LPI pending table @0x0000001793540000 [ 0.487268] CPU19: Booted secondary processor [510f8000] [ 0.488198] Detected PIPT I-cache on CPU20 [ 0.488216] GICv3: CPU20: found redistributor 1500 region 20:0x000000ff7fa80000 [ 0.488224] CPU20: using LPI pending table @0x0000001793580000 [ 0.488249] CPU20: Booted secondary processor [510f8000] [ 0.489170] Detected PIPT I-cache on CPU21 [ 0.489188] GICv3: CPU21: found redistributor 1600 region 21:0x000000ff7fb00000 [ 0.489197] CPU21: using LPI pending table @0x00000017935f0000 [ 0.489221] CPU21: Booted secondary processor [510f8000] [ 0.490138] Detected PIPT I-cache on CPU22 [ 0.490157] GICv3: CPU22: found redistributor 1700 region 22:0x000000ff7fb80000 [ 0.490165] CPU22: using LPI pending table @0x0000001793630000 [ 0.490189] CPU22: Booted secondary processor [510f8000] [ 0.491086] Detected PIPT I-cache on CPU23 [ 0.491105] GICv3: CPU23: found redistributor 1 region 23:0x000000ff7f040000 [ 0.491112] CPU23: using LPI pending table @0x0000001793670000 [ 0.491134] CPU23: Booted secondary processor [510f8000] [ 0.492031] Detected PIPT I-cache on CPU24 [ 0.492048] GICv3: CPU24: found redistributor 101 region 24:0x000000ff7f0c0000 [ 0.492056] CPU24: using LPI pending table @0x00000017936c0000 [ 0.492076] CPU24: Booted secondary processor [510f8000] [ 0.492986] Detected PIPT I-cache on CPU25 [ 0.493004] GICv3: CPU25: found redistributor 201 region 25:0x000000ff7f140000 [ 0.493012] CPU25: using LPI pending table @0x0000001793720000 [ 0.493032] CPU25: Booted secondary processor [510f8000] [ 0.493922] Detected PIPT I-cache on CPU26 [ 0.493942] GICv3: CPU26: found redistributor 301 region 26:0x000000ff7f1c0000 [ 0.493949] CPU26: using LPI pending table @0x0000001793760000 [ 0.493969] CPU26: Booted secondary processor [510f8000] [ 0.494874] Detected PIPT I-cache on CPU27 [ 0.494894] GICv3: CPU27: found redistributor 401 region 27:0x000000ff7f240000 [ 0.494901] CPU27: using LPI pending table @0x00000017937a0000 [ 0.494922] CPU27: Booted secondary processor [510f8000] [ 0.495849] Detected PIPT I-cache on CPU28 [ 0.495872] GICv3: CPU28: found redistributor 601 region 28:0x000000ff7f340000 [ 0.495881] CPU28: using LPI pending table @0x0000001793010000 [ 0.495907] CPU28: Booted secondary processor [510f8000] [ 0.496818] Detected PIPT I-cache on CPU29 [ 0.496839] GICv3: CPU29: found redistributor 701 region 29:0x000000ff7f3c0000 [ 0.496846] CPU29: using LPI pending table @0x0000001793060000 [ 0.496867] CPU29: Booted secondary processor [510f8000] [ 0.497727] Detected PIPT I-cache on CPU30 [ 0.497749] GICv3: CPU30: found redistributor 801 region 30:0x000000ff7f440000 [ 0.497757] CPU30: using LPI pending table @0x00000017930a0000 [ 0.497778] CPU30: Booted secondary processor [510f8000] [ 0.498671] Detected PIPT I-cache on CPU31 [ 0.498693] GICv3: CPU31: found redistributor 901 region 31:0x000000ff7f4c0000 [ 0.498701] CPU31: using LPI pending table @0x0000001793100000 [ 0.498722] CPU31: Booted secondary processor [510f8000] [ 0.499624] Detected PIPT I-cache on CPU32 [ 0.499646] GICv3: CPU32: found redistributor a01 region 32:0x000000ff7f540000 [ 0.499654] CPU32: using LPI pending table @0x0000001793140000 [ 0.499676] CPU32: Booted secondary processor [510f8000] [ 0.500544] Detected PIPT I-cache on CPU33 [ 0.500567] GICv3: CPU33: found redistributor b01 region 33:0x000000ff7f5c0000 [ 0.500575] CPU33: using LPI pending table @0x0000001793180000 [ 0.500597] CPU33: Booted secondary processor [510f8000] [ 0.501433] Detected PIPT I-cache on CPU34 [ 0.501456] GICv3: CPU34: found redistributor c01 region 34:0x000000ff7f640000 [ 0.501463] CPU34: using LPI pending table @0x00000017931f0000 [ 0.501486] CPU34: Booted secondary processor [510f8000] [ 0.502384] Detected PIPT I-cache on CPU35 [ 0.502408] GICv3: CPU35: found redistributor d01 region 35:0x000000ff7f6c0000 [ 0.502416] CPU35: using LPI pending table @0x0000001793230000 [ 0.502438] CPU35: Booted secondary processor [510f8000] [ 0.503352] Detected PIPT I-cache on CPU36 [ 0.503377] GICv3: CPU36: found redistributor e01 region 36:0x000000ff7f740000 [ 0.503385] CPU36: using LPI pending table @0x0000001793280000 [ 0.503407] CPU36: Booted secondary processor [510f8000] [ 0.504253] Detected PIPT I-cache on CPU37 [ 0.504277] GICv3: CPU37: found redistributor f01 region 37:0x000000ff7f7c0000 [ 0.504285] CPU37: using LPI pending table @0x00000017932e0000 [ 0.504308] CPU37: Booted secondary processor [510f8000] [ 0.505126] Detected PIPT I-cache on CPU38 [ 0.505151] GICv3: CPU38: found redistributor 1001 region 38:0x000000ff7f840000 [ 0.505159] CPU38: using LPI pending table @0x0000001793320000 [ 0.505182] CPU38: Booted secondary processor [510f8000] [ 0.506113] Detected PIPT I-cache on CPU39 [ 0.506139] GICv3: CPU39: found redistributor 1101 region 39:0x000000ff7f8c0000 [ 0.506147] CPU39: using LPI pending table @0x0000001793370000 [ 0.506170] CPU39: Booted secondary processor [510f8000] [ 0.507097] Detected PIPT I-cache on CPU40 [ 0.507123] GICv3: CPU40: found redistributor 1201 region 40:0x000000ff7f940000 [ 0.507131] CPU40: using LPI pending table @0x00000017933d0000 [ 0.507154] CPU40: Booted secondary processor [510f8000] [ 0.507982] Detected PIPT I-cache on CPU41 [ 0.508008] GICv3: CPU41: found redistributor 1301 region 41:0x000000ff7f9c0000 [ 0.508016] CPU41: using LPI pending table @0x0000001792c10000 [ 0.508039] CPU41: Booted secondary processor [510f8000] [ 0.508896] Detected PIPT I-cache on CPU42 [ 0.508922] GICv3: CPU42: found redistributor 1401 region 42:0x000000ff7fa40000 [ 0.508930] CPU42: using LPI pending table @0x0000001792c50000 [ 0.508952] CPU42: Booted secondary processor [510f8000] [ 0.509871] Detected PIPT I-cache on CPU43 [ 0.509899] GICv3: CPU43: found redistributor 1501 region 43:0x000000ff7fac0000 [ 0.509906] CPU43: using LPI pending table @0x0000001792cb0000 [ 0.509930] CPU43: Booted secondary processor [510f8000] [ 0.510838] Detected PIPT I-cache on CPU44 [ 0.510866] GICv3: CPU44: found redistributor 1601 region 44:0x000000ff7fb40000 [ 0.510873] CPU44: using LPI pending table @0x0000001792d10000 [ 0.510897] CPU44: Booted secondary processor [510f8000] [ 0.511753] Detected PIPT I-cache on CPU45 [ 0.511780] GICv3: CPU45: found redistributor 1701 region 45:0x000000ff7fbc0000 [ 0.511787] CPU45: using LPI pending table @0x0000001792d50000 [ 0.511811] CPU45: Booted secondary processor [510f8000] [ 0.511873] smp: Brought up 1 node, 46 CPUs [ 1.591228] SMP: Total of 46 processors activated. [ 1.596336] CPU features: detected feature: GIC system register CPU interface [ 1.603948] CPU features: detected feature: Privileged Access Never [ 1.610633] CPU features: detected feature: Kernel page table isolation (KPTI) [ 1.740357] CPU: All CPU(s) started at EL2 [ 1.744889] alternatives: patching kernel code [ 1.759402] devtmpfs: initialized [ 1.763089] evm: security.selinux [ 1.766617] evm: security.SMACK64 [ 1.770148] evm: security.SMACK64EXEC [ 1.774046] evm: security.SMACK64TRANSMUTE [ 1.778411] evm: security.SMACK64MMAP [ 1.782309] evm: security.ima [ 1.785468] evm: security.capability [ 1.789553] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.800032] futex hash table entries: 16384 (order: 9, 2097152 bytes) [ 1.807189] pinctrl core: initialized pinctrl subsystem [ 1.812963] SMBIOS 3.1.1 present. [ 1.816497] DMI: Qualcomm Qualcomm Centriq(TM) 2400 Development Platform/ABW|SYS|CVR,1DPC|V3 , BIOS STB_XBL.DF.2.0_-64-1-G1CA82A3-DIRT [ 1.830392] NET: Registered protocol family 16 [ 1.835818] cpuidle: using governor ladder [ 1.840250] cpuidle: using governor menu [ 1.844457] Detected 2 PCC Subspaces [ 1.848291] Registering PCC driver as Mailbox controller [ 1.854027] vdso: 2 pages (1 code @ ffff38c5d28d7000, 1 data @ ffff38c5d3235000) [ 1.861923] hw-breakpoint: found 8 breakpoint and 4 watchpoint registers. [ 1.869631] DMA: preallocated 256 KiB pool for atomic allocations [ 1.876153] ACPI: bus type PCI registered [ 1.880426] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.887329] Serial: AMBA PL011 UART driver [ 1.894133] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 1.901841] ipmi:dmi: Invalid IPMI type: 0 [ 1.902038] ACPI: Added _OSI(Module Device) [ 1.910866] ACPI: Added _OSI(Processor Device) [ 1.915603] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.920618] ACPI: Added _OSI(Processor Aggregator Device) [ 2.368541] ACPI: Interpreter enabled [ 2.372451] ACPI: Using GIC for interrupt routing [ 2.377479] ACPI: MCFG table detected, 3 entries [ 2.382747] HEST: Table parsing has been initialized. [ 2.436492] sbsa-uart ARMH0011:01: working around QDF2400 SoC erratum 44 [ 2.443657] ARMH0011:01: ttyAMA0 at MMIO 0xff78ed1000 (irq = 27, base_baud = 0) is a SBSA [ 2.452387] console [ttyAMA0] enabled [ 2.459935] bootconsole [pl11] disabled [ 2.477253] ACPI: PCI Interrupt Link [LN0A] (IRQs *88) [ 2.481461] ACPI: PCI Interrupt Link [LN0B] (IRQs *89) [ 2.486577] ACPI: PCI Interrupt Link [LN0C] (IRQs *90) [ 2.491698] ACPI: PCI Interrupt Link [LN0D] (IRQs *91) [ 2.496907] ACPI: PCI Root Bridge [PCI1] (domain 0001 [bus 00-ff]) [ 2.502977] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 2.511216] acpi PNP0A08:01: PCIe AER handled by firmware [ 2.516672] acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 2.530754] acpi PNP0A08:01: ECAM area [mem 0x90000000000-0x9000fffffff] reserved by PNP0C02:01 [ 2.538507] acpi PNP0A08:01: ECAM at [mem 0x90000000000-0x9000fffffff] for [bus 00-ff] [ 2.546428] Remapped I/O 0x000009ffffff0000 to [io 0x0000-0xffff window] [ 2.553228] PCI host bridge to bus 0001:00 [ 2.557243] pci_bus 0001:00: root bus resource [mem 0x90100100000-0x9011fffffff window] (bus address [0x00100000-0x1fffffff]) [ 2.568526] pci_bus 0001:00: root bus resource [mem 0x90200000000-0x9021fffffff window] (bus address [0x20000000-0x3fffffff]) [ 2.579811] pci_bus 0001:00: root bus resource [mem 0x90300000000-0x9033fffffff window] (bus address [0x40000000-0x7fffffff]) [ 2.591095] pci_bus 0001:00: root bus resource [mem 0x90400000000-0x9fffffeffff window] [ 2.599081] pci_bus 0001:00: root bus resource [io 0x0000-0xffff window] (bus address [0x1000-0x10fff]) [ 2.608543] pci_bus 0001:00: root bus resource [bus 00-ff] [ 2.614019] pci 0001:00:00.0: [17cb:0401] type 01 class 0x060400 [ 2.620033] pci 0001:00:00.0: PME# supported from D0 D3hot [ 2.625559] pci 0001:00:00.0: BAR 14: assigned [mem 0x90100100000-0x901002fffff] [ 2.632851] pci 0001:00:00.0: BAR 15: assigned [mem 0x90400000000-0x904001fffff 64bit pref] [ 2.641182] pci 0001:00:00.0: BAR 13: assigned [io 0x1000-0x1fff] [ 2.647346] pci 0001:00:00.0: PCI bridge to [bus 01] [ 2.652293] pci 0001:00:00.0: bridge window [io 0x1000-0x1fff] [ 2.658370] pci 0001:00:00.0: bridge window [mem 0x90100100000-0x901002fffff] [ 2.665662] pci 0001:00:00.0: bridge window [mem 0x90400000000-0x904001fffff 64bit pref] [ 2.673911] pci 0001:00:00.0: Max Payload Size set to 512/ 512 (was 512), Max Read Rq 4096 [ 2.682358] ACPI: PCI Interrupt Link [LN1A] (IRQs *92) [ 2.687472] ACPI: PCI Interrupt Link [LN1B] (IRQs *93) [ 2.692592] ACPI: PCI Interrupt Link [LN1C] (IRQs *94) [ 2.697713] ACPI: PCI Interrupt Link [LN1D] (IRQs *95) [ 2.702920] ACPI: PCI Root Bridge [PCI2] (domain 0002 [bus 00-ff]) [ 2.708992] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 2.717232] acpi PNP0A08:02: PCIe AER handled by firmware [ 2.722690] acpi PNP0A08:02: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 2.736860] acpi PNP0A08:02: ECAM area [mem 0xa0000000000-0xa000fffffff] reserved by PNP0C02:02 [ 2.744611] acpi PNP0A08:02: ECAM at [mem 0xa0000000000-0xa000fffffff] for [bus 00-ff] [ 2.752530] Remapped I/O 0x00000affffff0000 to [io 0x10000-0x1ffff window] [ 2.759506] PCI host bridge to bus 0002:00 [ 2.763525] pci_bus 0002:00: root bus resource [mem 0xa0100100000-0xa011fffffff window] (bus address [0x00100000-0x1fffffff]) [ 2.774805] pci_bus 0002:00: root bus resource [mem 0xa0200000000-0xa021fffffff window] (bus address [0x20000000-0x3fffffff]) [ 2.786090] pci_bus 0002:00: root bus resource [mem 0xa0300000000-0xa033fffffff window] (bus address [0x40000000-0x7fffffff]) [ 2.797374] pci_bus 0002:00: root bus resource [mem 0xa0400000000-0xafffffeffff window] [ 2.805360] pci_bus 0002:00: root bus resource [io 0x10000-0x1ffff window] (bus address [0x1000-0x10fff]) [ 2.814996] pci_bus 0002:00: root bus resource [bus 00-ff] [ 2.820470] pci 0002:00:00.0: [17cb:0401] type 01 class 0x060400 [ 2.826483] pci 0002:00:00.0: PME# supported from D0 D3hot [ 2.832014] pci 0002:01:00.0: [8086:105e] type 00 class 0x020000 [ 2.837934] pci 0002:01:00.0: reg 0x10: [mem 0xa011ff60000-0xa011ff7ffff] [ 2.844690] pci 0002:01:00.0: reg 0x14: [mem 0xa011ff40000-0xa011ff5ffff] [ 2.851461] pci 0002:01:00.0: reg 0x18: [io 0x1f020-0x1f03f] [ 2.857214] pci 0002:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 2.863923] pci 0002:01:00.0: PME# supported from D0 D3hot D3cold [ 2.870017] pci 0002:01:00.1: [8086:105e] type 00 class 0x020000 [ 2.875954] pci 0002:01:00.1: reg 0x10: [mem 0xa011ff20000-0xa011ff3ffff] [ 2.882711] pci 0002:01:00.1: reg 0x14: [mem 0xa011ff00000-0xa011ff1ffff] [ 2.889482] pci 0002:01:00.1: reg 0x18: [io 0x1f000-0x1f01f] [ 2.895234] pci 0002:01:00.1: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 2.901942] pci 0002:01:00.1: PME# supported from D0 D3hot D3cold [ 2.908031] pci 0002:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 2.917962] pci 0002:00:00.0: BAR 14: assigned [mem 0xa0100100000-0xa01002fffff] [ 2.925327] pci 0002:00:00.0: BAR 15: assigned [mem 0xa0400000000-0xa04001fffff 64bit pref] [ 2.933659] pci 0002:00:00.0: BAR 13: assigned [io 0x10000-0x10fff] [ 2.939997] pci 0002:01:00.0: BAR 0: assigned [mem 0xa0100100000-0xa010011ffff] [ 2.947290] pci 0002:01:00.0: BAR 1: assigned [mem 0xa0100120000-0xa010013ffff] [ 2.954582] pci 0002:01:00.0: BAR 6: assigned [mem 0xa0100140000-0xa010015ffff pref] [ 2.962305] pci 0002:01:00.1: BAR 0: assigned [mem 0xa0100160000-0xa010017ffff] [ 2.969599] pci 0002:01:00.1: BAR 1: assigned [mem 0xa0100180000-0xa010019ffff] [ 2.976890] pci 0002:01:00.1: BAR 6: assigned [mem 0xa01001a0000-0xa01001bffff pref] [ 2.984614] pci 0002:01:00.0: BAR 2: assigned [io 0x10000-0x1001f] [ 2.990866] pci 0002:01:00.1: BAR 2: assigned [io 0x10020-0x1003f] [ 2.997118] pci 0002:00:00.0: PCI bridge to [bus 01] [ 3.002062] pci 0002:00:00.0: bridge window [io 0x10000-0x10fff] [ 3.008313] pci 0002:00:00.0: bridge window [mem 0xa0100100000-0xa01002fffff] [ 3.015604] pci 0002:00:00.0: bridge window [mem 0xa0400000000-0xa04001fffff 64bit pref] [ 3.023853] pci 0002:00:00.0: Max Payload Size set to 256/ 512 (was 256), Max Read Rq 4096 [ 3.032276] pci 0002:01:00.0: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 4096 [ 3.040696] pci 0002:01:00.1: Max Payload Size set to 256/ 256 (was 256), Max Read Rq 4096 [ 3.049142] ACPI: PCI Interrupt Link [LN2A] (IRQs *96) [ 3.054255] ACPI: PCI Interrupt Link [LN2B] (IRQs *97) [ 3.059375] ACPI: PCI Interrupt Link [LN2C] (IRQs *98) [ 3.064496] ACPI: PCI Interrupt Link [LN2D] (IRQs *99) [ 3.069707] ACPI: PCI Root Bridge [PCI3] (domain 0003 [bus 00-ff]) [ 3.075775] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 3.084014] acpi PNP0A08:03: PCIe AER handled by firmware [ 3.089469] acpi PNP0A08:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 3.103740] acpi PNP0A08:03: ECAM area [mem 0xc0000000000-0xc000fffffff] reserved by PNP0C02:03 [ 3.111492] acpi PNP0A08:03: ECAM at [mem 0xc0000000000-0xc000fffffff] for [bus 00-ff] [ 3.119411] Remapped I/O 0x00000cffffff0000 to [io 0x20000-0x2ffff window] [ 3.126386] PCI host bridge to bus 0003:00 [ 3.130402] pci_bus 0003:00: root bus resource [mem 0xc0100100000-0xc011fffffff window] (bus address [0x00100000-0x1fffffff]) [ 3.141685] pci_bus 0003:00: root bus resource [mem 0xc0200000000-0xc021fffffff window] (bus address [0x20000000-0x3fffffff]) [ 3.152970] pci_bus 0003:00: root bus resource [mem 0xc0300000000-0xc033fffffff window] (bus address [0x40000000-0x7fffffff]) [ 3.164254] pci_bus 0003:00: root bus resource [mem 0xc0400000000-0xcfffffeffff window] [ 3.172241] pci_bus 0003:00: root bus resource [io 0x20000-0x2ffff window] (bus address [0x1000-0x10fff]) [ 3.181876] pci_bus 0003:00: root bus resource [bus 00-ff] [ 3.187350] pci 0003:00:00.0: [17cb:0401] type 01 class 0x060400 [ 3.193359] pci 0003:00:00.0: PME# supported from D0 D3hot [ 3.198927] pci 0003:01:00.0: [15b3:1015] type 00 class 0x020000 [ 3.204913] pci 0003:01:00.0: reg 0x10: [mem 0xcfffc000000-0xcfffdffffff 64bit pref] [ 3.212650] pci 0003:01:00.0: reg 0x30: [mem 0xfff00000-0xffffffff pref] [ 3.219624] pci 0003:01:00.0: PME# supported from D3cold [ 3.224662] pci 0003:01:00.0: reg 0x1a4: [mem 0xcfffe000000-0xcfffe0fffff 64bit pref] [ 3.232310] pci 0003:01:00.0: VF(n) BAR0 space: [mem 0xcfffe000000-0xcfffe7fffff 64bit pref] (contains BAR0 for 8 VFs) [ 3.243569] pci 0003:00:00.0: BAR 15: assigned [mem 0xc0400000000-0xc0403ffffff 64bit pref] [ 3.251322] pci 0003:00:00.0: BAR 14: assigned [mem 0xc0100100000-0xc01002fffff] [ 3.258699] pci 0003:00:00.0: BAR 13: assigned [io 0x20000-0x20fff] [ 3.265036] pci 0003:01:00.0: BAR 0: assigned [mem 0xc0400000000-0xc0401ffffff 64bit pref] [ 3.273317] pci 0003:01:00.0: BAR 6: assigned [mem 0xc0100100000-0xc01001fffff pref] [ 3.281008] pci 0003:01:00.0: BAR 7: assigned [mem 0xc0402000000-0xc04027fffff 64bit pref] [ 3.289270] pci 0003:00:00.0: PCI bridge to [bus 01-02] [ 3.294463] pci 0003:00:00.0: bridge window [io 0x20000-0x20fff] [ 3.300713] pci 0003:00:00.0: bridge window [mem 0xc0100100000-0xc01002fffff] [ 3.308004] pci 0003:00:00.0: bridge window [mem 0xc0400000000-0xc0403ffffff 64bit pref] [ 3.316253] pci 0003:00:00.0: Max Payload Size set to 512/ 512 (was 512), Max Read Rq 4096 [ 3.324713] pci 0003:01:00.0: Max Payload Size set to 512/ 512 (was 512), Max Read Rq 4096 [ 3.333121] ACPI: PCI Interrupt Link [LN3A] (IRQs *100) [ 3.338323] ACPI: PCI Interrupt Link [LN3B] (IRQs *101) [ 3.343532] ACPI: PCI Interrupt Link [LN3C] (IRQs *102) [ 3.348739] ACPI: PCI Interrupt Link [LN3D] (IRQs *103) [ 3.354026] ACPI: PCI Interrupt Link [LN4A] (IRQs *104) [ 3.359156] ACPI: PCI Interrupt Link [LN4B] (IRQs *105) [ 3.364362] ACPI: PCI Interrupt Link [LN4C] (IRQs *106) [ 3.369570] ACPI: PCI Interrupt Link [LN4D] (IRQs *107) [ 3.374850] ACPI: PCI Interrupt Link [LN5A] (IRQs *108) [ 3.379988] ACPI: PCI Interrupt Link [LN5B] (IRQs *109) [ 3.385195] ACPI: PCI Interrupt Link [LN5C] (IRQs *110) [ 3.390404] ACPI: PCI Interrupt Link [LN5D] (IRQs *111) [ 3.410426] vgaarb: loaded [ 3.412414] SCSI subsystem initialized [ 3.416008] libata version 3.00 loaded. [ 3.419747] ACPI: bus type USB registered [ 3.423738] usbcore: registered new interface driver usbfs [ 3.429194] usbcore: registered new interface driver hub [ 3.434596] usbcore: registered new device driver usb [ 3.439872] EDAC MC: Ver: 3.0.0 [ 3.442741] Registered efivars operations [ 3.448049] NetLabel: Initializing [ 3.450486] NetLabel: domain hash size = 128 [ 3.454835] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 3.460487] NetLabel: unlabeled traffic allowed by default [ 3.466504] clocksource: Switched to clocksource arch_sys_counter [ 3.486371] VFS: Disk quotas dquot_6.6.0 [ 3.489358] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.496324] pnp: PnP ACPI init [ 3.502949] system 00:00: [mem 0x80000000000-0x8000fffffff] has been reserved [ 3.509130] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.515979] system 00:01: [mem 0x90000000000-0x9000fffffff] could not be reserved [ 3.523364] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.530214] system 00:02: [mem 0xa0000000000-0xa000fffffff] could not be reserved [ 3.537600] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.544452] system 00:03: [mem 0xc0000000000-0xc000fffffff] could not be reserved [ 3.551836] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.558687] system 00:04: [mem 0xd0000000000-0xd000fffffff] has been reserved [ 3.565728] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.572576] system 00:05: [mem 0xe0000000000-0xe000fffffff] has been reserved [ 3.579614] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 3.591330] pnp: PnP ACPI: found 6 devices [ 3.596498] NET: Registered protocol family 2 [ 3.600212] TCP established hash table entries: 524288 (order: 10, 4194304 bytes) [ 3.608046] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 3.614155] TCP: Hash tables configured (established 524288 bind 65536) [ 3.620789] UDP hash table entries: 65536 (order: 9, 2097152 bytes) [ 3.627211] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes) [ 3.633966] NET: Registered protocol family 1 [ 3.637952] pci 0003:01:00.0: enabling device (0000 -> 0002) [ 3.643588] PCI: CLS 64 bytes, default 128 [ 3.647680] Unpacking initramfs... [ 4.765579] Freeing initrd memory: 75272K [ 4.769650] qcom-pmu-extensions QCOM8150:00: PCC support detected [ 4.775519] hw perfevents: enabled with qcom_pmuv3_0 PMU driver, 9 counters available [ 4.782778] Enabled QCOM QOS feature, number of ids 240 [ 4.788044] qcom-qos QCOM8102:00: Property 'ccm_scale' not defined, set def scale 2560 [ 4.795705] qcom-qos QCOM8102:00: Registered QOS CCM PMU, type: 7 [ 4.801913] kvm [1]: 16-bit VMID [ 4.804992] kvm [1]: IDMAP page: 114c3000 [ 4.808983] kvm [1]: HYP VA range: 800000000000:ffffffffffff [ 4.815160] kvm [1]: GICv3: no GICV resource entry [ 4.819405] kvm [1]: disabling GICv2 emulation [ 4.823885] kvm [1]: GIC system register CPU interface enabled [ 4.830232] kvm [1]: vgic interrupt IRQ1 [ 4.833554] kvm [1]: virtual timer IRQ3 [ 4.837908] kvm [1]: Hyp mode initialized successfully [ 4.843625] audit: initializing netlink subsys (disabled) [ 4.848138] audit: type=2000 audit(3.812:1): state=initialized audit_enabled=0 res=1 [ 4.848283] Initialise system trusted keyrings [ 4.848295] Key type blacklist registered [ 4.848333] workingset: timestamp_bits=40 max_order=25 bucket_order=0 [ 4.849567] zbud: loaded [ 4.850169] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 4.850347] fuse init (API version 7.26) [ 4.852355] Key type asymmetric registered [ 4.852356] Asymmetric key parser 'x509' registered [ 4.852405] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 4.852504] io scheduler noop registered [ 4.852505] io scheduler deadline registered [ 4.852562] io scheduler cfq registered (default) [ 4.912669] qcom-irq-combiner QCOM80B1:00: Initialized with [p=111,n=29,r=ffff0000085bd018] [ 4.920439] qcom-irq-combiner QCOM80B1:01: Initialized with [p=112,n=12,r=ffff00000860d024] [ 4.928761] qcom-irq-combiner QCOM80B1:02: Initialized with [p=113,n=16,r=ffff00000863d038] [ 4.937089] qcom-irq-combiner QCOM80B1:03: Initialized with [p=114,n=18,r=ffff00000868d03c] [ 4.954274] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 4.965535] thermal LNXTHERM:00: registered as thermal_zone0 [ 4.971128] ACPI: Thermal Zone [TZ0] (31 C) [ 4.975412] thermal LNXTHERM:01: registered as thermal_zone1 [ 4.980937] ACPI: Thermal Zone [TZ1] (26 C) [ 4.985217] thermal LNXTHERM:02: registered as thermal_zone2 [ 4.990746] ACPI: Thermal Zone [TZ2] (25 C) [ 4.995026] thermal LNXTHERM:03: registered as thermal_zone3 [ 5.000555] ACPI: Thermal Zone [TZ3] (25 C) [ 5.004834] thermal LNXTHERM:04: registered as thermal_zone4 [ 5.010364] ACPI: Thermal Zone [TZ4] (25 C) [ 5.014639] thermal LNXTHERM:05: registered as thermal_zone5 [ 5.020173] ACPI: Thermal Zone [TZ5] (25 C) [ 5.024452] thermal LNXTHERM:06: registered as thermal_zone6 [ 5.029982] ACPI: Thermal Zone [TZ6] (23 C) [ 5.034257] thermal LNXTHERM:07: registered as thermal_zone7 [ 5.039794] ACPI: Thermal Zone [TZ7] (24 C) [ 5.044068] thermal LNXTHERM:08: registered as thermal_zone8 [ 5.049600] ACPI: Thermal Zone [TZ8] (24 C) [ 5.053875] thermal LNXTHERM:09: registered as thermal_zone9 [ 5.059409] ACPI: Thermal Zone [TZ9] (23 C) [ 5.063688] thermal LNXTHERM:0a: registered as thermal_zone10 [ 5.069305] ACPI: Thermal Zone [TZ10] (23 C) [ 5.073671] thermal LNXTHERM:0d: registered as thermal_zone11 [ 5.079288] ACPI: Thermal Zone [TZ13] (25 C) [ 5.083650] thermal LNXTHERM:0e: registered as thermal_zone12 [ 5.089270] ACPI: Thermal Zone [TZ14] (24 C) [ 5.093632] thermal LNXTHERM:0f: registered as thermal_zone13 [ 5.099253] ACPI: Thermal Zone [TZ15] (25 C) [ 5.103617] thermal LNXTHERM:10: registered as thermal_zone14 [ 5.109235] ACPI: Thermal Zone [TZ16] (24 C) [ 5.113598] thermal LNXTHERM:11: registered as thermal_zone15 [ 5.119218] ACPI: Thermal Zone [TZ17] (23 C) [ 5.123580] thermal LNXTHERM:12: registered as thermal_zone16 [ 5.129200] ACPI: Thermal Zone [TZ18] (25 C) [ 5.133564] thermal LNXTHERM:13: registered as thermal_zone17 [ 5.139183] ACPI: Thermal Zone [TZ19] (25 C) [ 5.143548] thermal LNXTHERM:14: registered as thermal_zone18 [ 5.149166] ACPI: Thermal Zone [TZ20] (25 C) [ 5.153527] thermal LNXTHERM:15: registered as thermal_zone19 [ 5.159149] ACPI: Thermal Zone [TZ21] (25 C) [ 5.163510] thermal LNXTHERM:16: registered as thermal_zone20 [ 5.169134] ACPI: Thermal Zone [TZ22] (25 C) [ 5.173497] thermal LNXTHERM:17: registered as thermal_zone21 [ 5.179114] ACPI: Thermal Zone [TZ23] (25 C) [ 5.183480] thermal LNXTHERM:18: registered as thermal_zone22 [ 5.189097] ACPI: Thermal Zone [TZ24] (24 C) [ 5.193457] thermal LNXTHERM:19: registered as thermal_zone23 [ 5.199079] ACPI: Thermal Zone [TZ25] (24 C) [ 5.203440] thermal LNXTHERM:1a: registered as thermal_zone24 [ 5.209061] ACPI: Thermal Zone [TZ26] (25 C) [ 5.213427] thermal LNXTHERM:1b: registered as thermal_zone25 [ 5.219044] ACPI: Thermal Zone [TZ27] (25 C) [ 5.223407] thermal LNXTHERM:1c: registered as thermal_zone26 [ 5.229027] ACPI: Thermal Zone [TZ28] (25 C) [ 5.233390] thermal LNXTHERM:1d: registered as thermal_zone27 [ 5.239010] ACPI: Thermal Zone [TZ29] (24 C) [ 5.243371] thermal LNXTHERM:1e: registered as thermal_zone28 [ 5.248992] ACPI: Thermal Zone [TZ30] (25 C) [ 5.253355] thermal LNXTHERM:1f: registered as thermal_zone29 [ 5.258975] ACPI: Thermal Zone [TZ31] (25 C) [ 5.263338] thermal LNXTHERM:20: registered as thermal_zone30 [ 5.268958] ACPI: Thermal Zone [TZ32] (24 C) [ 5.273323] thermal LNXTHERM:21: registered as thermal_zone31 [ 5.278940] ACPI: Thermal Zone [TZ33] (24 C) [ 5.283302] thermal LNXTHERM:22: registered as thermal_zone32 [ 5.288923] ACPI: Thermal Zone [TZ34] (24 C) [ 5.293283] thermal LNXTHERM:23: registered as thermal_zone33 [ 5.298908] ACPI: Thermal Zone [TZ35] (24 C) [ 5.303273] thermal LNXTHERM:24: registered as thermal_zone34 [ 5.308888] ACPI: Thermal Zone [TZ36] (25 C) [ 5.313250] thermal LNXTHERM:25: registered as thermal_zone35 [ 5.318871] ACPI: Thermal Zone [TZ37] (25 C) [ 5.323233] thermal LNXTHERM:26: registered as thermal_zone36 [ 5.328853] ACPI: Thermal Zone [TZ38] (25 C) [ 5.333215] thermal LNXTHERM:27: registered as thermal_zone37 [ 5.338836] ACPI: Thermal Zone [TZ39] (25 C) [ 5.343200] thermal LNXTHERM:28: registered as thermal_zone38 [ 5.348819] ACPI: Thermal Zone [TZ40] (24 C) [ 5.353180] thermal LNXTHERM:29: registered as thermal_zone39 [ 5.358802] ACPI: Thermal Zone [TZ41] (24 C) [ 5.363170] thermal LNXTHERM:2a: registered as thermal_zone40 [ 5.368784] ACPI: Thermal Zone [TZ42] (25 C) [ 5.373149] thermal LNXTHERM:2b: registered as thermal_zone41 [ 5.378771] ACPI: Thermal Zone [TZ43] (25 C) [ 5.383142] thermal LNXTHERM:2c: registered as thermal_zone42 [ 5.388753] ACPI: Thermal Zone [TZ44] (25 C) [ 5.393117] thermal LNXTHERM:2d: registered as thermal_zone43 [ 5.398733] ACPI: Thermal Zone [TZ45] (25 C) [ 5.403096] thermal LNXTHERM:2e: registered as thermal_zone44 [ 5.408715] ACPI: Thermal Zone [TZ46] (25 C) [ 5.413077] thermal LNXTHERM:2f: registered as thermal_zone45 [ 5.418697] ACPI: Thermal Zone [TZ47] (25 C) [ 5.423061] thermal LNXTHERM:30: registered as thermal_zone46 [ 5.428683] ACPI: Thermal Zone [TZ48] (26 C) [ 5.433043] thermal LNXTHERM:31: registered as thermal_zone47 [ 5.438663] ACPI: Thermal Zone [TZ49] (31 C) [ 5.443020] thermal LNXTHERM:32: registered as thermal_zone48 [ 5.448645] ACPI: Thermal Zone [TZ50] (19 C) [ 5.453002] thermal LNXTHERM:33: registered as thermal_zone49 [ 5.458627] ACPI: Thermal Zone [TZ51] (25 C) [ 5.462987] thermal LNXTHERM:34: registered as thermal_zone50 [ 5.468610] ACPI: Thermal Zone [TZ52] (26 C) [ 5.472969] thermal LNXTHERM:35: registered as thermal_zone51 [ 5.478593] ACPI: Thermal Zone [TZ53] (24 C) [ 5.482953] thermal LNXTHERM:36: registered as thermal_zone52 [ 5.488575] ACPI: Thermal Zone [TZ54] (24 C) [ 5.492935] thermal LNXTHERM:37: registered as thermal_zone53 [ 5.498558] ACPI: Thermal Zone [TZ55] (24 C) [ 5.502919] thermal LNXTHERM:38: registered as thermal_zone54 [ 5.508541] ACPI: Thermal Zone [TZ56] (23 C) [ 5.512900] thermal LNXTHERM:39: registered as thermal_zone55 [ 5.518524] ACPI: Thermal Zone [TZ57] (24 C) [ 5.522882] thermal LNXTHERM:3a: registered as thermal_zone56 [ 5.528506] ACPI: Thermal Zone [TZ58] (24 C) [ 5.533020] ghes_edac: This EDAC driver relies on BIOS to enumerate memory and get error reports. [ 5.541617] ghes_edac: Unfortunately, not all BIOSes reflect the memory layout correctly. [ 5.549771] ghes_edac: So, the end result of using this driver varies from vendor to vendor. [ 5.558195] ghes_edac: If you find incorrect reports, please contact your hardware vendor [ 5.566351] ghes_edac: to correct its BIOS. [ 5.570518] ghes_edac: This system has 6 DIMM sockets. [ 5.575768] EDAC MC0: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) [ 5.585157] EDAC MC1: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) [ 5.594613] EDAC MC2: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) [ 5.604071] EDAC MC3: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) [ 5.613530] EDAC MC4: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT) [ 5.623086] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 5.630411] ACPI GTDT: found 1 SBSA generic Watchdog(s). [ 5.637075] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 5.644326] msm_serial: driver initialized [ 5.647933] arm-smmu-v3 arm-smmu-v3.0.auto: option mask 0x0 [ 5.653050] arm-smmu-v3 arm-smmu-v3.0.auto: ias 44-bit, oas 44-bit (features 0x00001fef) [ 5.661097] arm-smmu-v3 arm-smmu-v3.0.auto: SMMU currently enabled! Resetting... [ 5.668476] arm-smmu-v3 arm-smmu-v3.0.auto: msi_domain absent - falling back to wired irqs [ 5.676931] arm-smmu-v3 arm-smmu-v3.1.auto: option mask 0x0 [ 5.682287] arm-smmu-v3 arm-smmu-v3.1.auto: ias 44-bit, oas 44-bit (features 0x00001fef) [ 5.690350] arm-smmu-v3 arm-smmu-v3.1.auto: SMMU currently enabled! Resetting... [ 5.697728] arm-smmu-v3 arm-smmu-v3.1.auto: msi_domain absent - falling back to wired irqs [ 5.706121] arm-smmu-v3 arm-smmu-v3.2.auto: option mask 0x0 [ 5.711536] arm-smmu-v3 arm-smmu-v3.2.auto: ias 44-bit, oas 44-bit (features 0x00001fef) [ 5.719601] arm-smmu-v3 arm-smmu-v3.2.auto: SMMU currently enabled! Resetting... [ 5.726981] arm-smmu-v3 arm-smmu-v3.2.auto: msi_domain absent - falling back to wired irqs [ 5.735369] arm-smmu-v3 arm-smmu-v3.3.auto: option mask 0x0 [ 5.740791] arm-smmu-v3 arm-smmu-v3.3.auto: ias 44-bit, oas 44-bit (features 0x00001fef) [ 5.748856] arm-smmu-v3 arm-smmu-v3.3.auto: SMMU currently enabled! Resetting... [ 5.756235] arm-smmu-v3 arm-smmu-v3.3.auto: msi_domain absent - falling back to wired irqs [ 5.764625] arm-smmu-v3 arm-smmu-v3.4.auto: option mask 0x0 [ 5.770048] arm-smmu-v3 arm-smmu-v3.4.auto: ias 44-bit, oas 44-bit (features 0x00001fef) [ 5.778108] arm-smmu-v3 arm-smmu-v3.4.auto: SMMU currently enabled! Resetting... [ 5.785489] arm-smmu-v3 arm-smmu-v3.4.auto: msi_domain absent - falling back to wired irqs [ 5.793877] arm-smmu-v3 arm-smmu-v3.5.auto: option mask 0x0 [ 5.799302] arm-smmu-v3 arm-smmu-v3.5.auto: ias 44-bit, oas 44-bit (features 0x00001fef) [ 5.807363] arm-smmu-v3 arm-smmu-v3.5.auto: SMMU currently enabled! Resetting... [ 5.814744] arm-smmu-v3 arm-smmu-v3.5.auto: msi_domain absent - falling back to wired irqs [ 5.823589] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 5.833424] loop: module loaded [ 5.836086] mdio_bus fixed-0: GPIO lookup for consumer reset [ 5.841253] mdio_bus fixed-0: using lookup tables for GPIO lookup [ 5.847325] mdio_bus fixed-0: lookup for GPIO reset failed [ 5.852799] libphy: Fixed MDIO Bus: probed [ 5.856872] tun: Universal TUN/TAP device driver, 1.6 [ 5.862344] PPP generic driver version 2.4.2 [ 5.866299] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.872680] ehci-pci: EHCI PCI platform driver [ 5.877113] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.883263] ohci-pci: OHCI PCI platform driver [ 5.887696] uhci_hcd: USB Universal Host Controller Interface driver [ 5.894180] mousedev: PS/2 mouse device common for all mice [ 5.899885] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0 [ 5.905820] i2c /dev entries driver [ 5.909631] device-mapper: uevent: version 1.0.3 [ 5.913855] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 5.923929] ledtrig-cpu: registered to indicate activity on CPUs [ 5.929043] EFI Variables Facility v0.08 2004-May-17 [ 5.935411] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 0 [ 5.941426] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 1 [ 5.948368] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 2 [ 5.955307] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 3 [ 5.962250] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 4 [ 5.969195] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 5 [ 5.976140] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 6 [ 5.983084] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 7 [ 5.990028] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 8 [ 5.996973] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 9 [ 6.003917] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 10 [ 6.010948] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 11 [ 6.017980] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 12 [ 6.025011] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 13 [ 6.032042] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 14 [ 6.039074] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 15 [ 6.046104] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 16 [ 6.053135] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 17 [ 6.060168] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 18 [ 6.067200] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 19 [ 6.074229] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 20 [ 6.081262] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 21 [ 6.088293] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 22 [ 6.095323] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU cluster 23 [ 6.102399] qcom-l2cache-pmu QCOM8130:00: CPU0 associated with cluster 0 [ 6.109103] qcom-l2cache-pmu QCOM8130:00: CPU1 associated with cluster 1 [ 6.115786] qcom-l2cache-pmu QCOM8130:00: CPU2 associated with cluster 2 [ 6.122434] qcom-l2cache-pmu QCOM8130:00: CPU3 associated with cluster 3 [ 6.129162] qcom-l2cache-pmu QCOM8130:00: CPU4 associated with cluster 4 [ 6.135852] qcom-l2cache-pmu QCOM8130:00: CPU5 associated with cluster 5 [ 6.142535] qcom-l2cache-pmu QCOM8130:00: CPU6 associated with cluster 7 [ 6.149219] qcom-l2cache-pmu QCOM8130:00: CPU7 associated with cluster 8 [ 6.155906] qcom-l2cache-pmu QCOM8130:00: CPU8 associated with cluster 9 [ 6.162591] qcom-l2cache-pmu QCOM8130:00: CPU9 associated with cluster 10 [ 6.169360] qcom-l2cache-pmu QCOM8130:00: CPU10 associated with cluster 11 [ 6.176218] qcom-l2cache-pmu QCOM8130:00: CPU11 associated with cluster 12 [ 6.183076] qcom-l2cache-pmu QCOM8130:00: CPU12 associated with cluster 13 [ 6.189892] qcom-l2cache-pmu QCOM8130:00: CPU13 associated with cluster 14 [ 6.196743] qcom-l2cache-pmu QCOM8130:00: CPU14 associated with cluster 15 [ 6.203628] qcom-l2cache-pmu QCOM8130:00: CPU15 associated with cluster 16 [ 6.210495] qcom-l2cache-pmu QCOM8130:00: CPU16 associated with cluster 17 [ 6.217354] qcom-l2cache-pmu QCOM8130:00: CPU17 associated with cluster 18 [ 6.224212] qcom-l2cache-pmu QCOM8130:00: CPU18 associated with cluster 19 [ 6.231058] qcom-l2cache-pmu QCOM8130:00: CPU19 associated with cluster 20 [ 6.237914] qcom-l2cache-pmu QCOM8130:00: CPU20 associated with cluster 21 [ 6.244771] qcom-l2cache-pmu QCOM8130:00: CPU21 associated with cluster 22 [ 6.251629] qcom-l2cache-pmu QCOM8130:00: CPU22 associated with cluster 23 [ 6.258523] qcom-l2cache-pmu QCOM8130:00: CPU23 associated with cluster 0 [ 6.265304] qcom-l2cache-pmu QCOM8130:00: CPU24 associated with cluster 1 [ 6.272071] qcom-l2cache-pmu QCOM8130:00: CPU25 associated with cluster 2 [ 6.278842] qcom-l2cache-pmu QCOM8130:00: CPU26 associated with cluster 3 [ 6.285611] qcom-l2cache-pmu QCOM8130:00: CPU27 associated with cluster 4 [ 6.292384] qcom-l2cache-pmu QCOM8130:00: CPU28 associated with cluster 6 [ 6.299156] qcom-l2cache-pmu QCOM8130:00: CPU29 associated with cluster 7 [ 6.305923] qcom-l2cache-pmu QCOM8130:00: CPU30 associated with cluster 8 [ 6.312697] qcom-l2cache-pmu QCOM8130:00: CPU31 associated with cluster 9 [ 6.319469] qcom-l2cache-pmu QCOM8130:00: CPU32 associated with cluster 10 [ 6.326325] qcom-l2cache-pmu QCOM8130:00: CPU33 associated with cluster 11 [ 6.333181] qcom-l2cache-pmu QCOM8130:00: CPU34 associated with cluster 12 [ 6.340040] qcom-l2cache-pmu QCOM8130:00: CPU35 associated with cluster 13 [ 6.346859] qcom-l2cache-pmu QCOM8130:00: CPU36 associated with cluster 14 [ 6.353714] qcom-l2cache-pmu QCOM8130:00: CPU37 associated with cluster 15 [ 6.360612] qcom-l2cache-pmu QCOM8130:00: CPU38 associated with cluster 16 [ 6.367428] qcom-l2cache-pmu QCOM8130:00: CPU39 associated with cluster 17 [ 6.374281] qcom-l2cache-pmu QCOM8130:00: CPU40 associated with cluster 18 [ 6.381138] qcom-l2cache-pmu QCOM8130:00: CPU41 associated with cluster 19 [ 6.388035] qcom-l2cache-pmu QCOM8130:00: CPU42 associated with cluster 20 [ 6.394902] qcom-l2cache-pmu QCOM8130:00: CPU43 associated with cluster 21 [ 6.401759] qcom-l2cache-pmu QCOM8130:00: CPU44 associated with cluster 22 [ 6.408616] qcom-l2cache-pmu QCOM8130:00: CPU45 associated with cluster 23 [ 6.415475] qcom-l2cache-pmu QCOM8130:00: Registered L2 cache PMU using 24 HW PMUs [ 6.425728] qcom-l3cache-pmu QCOM8081:00: Registered l3cache_0_0, type: 9 [ 6.433918] qcom-l3cache-pmu QCOM8081:01: Registered l3cache_0_1, type: 10 [ 6.442174] qcom-l3cache-pmu QCOM8081:02: Registered l3cache_0_2, type: 11 [ 6.450415] qcom-l3cache-pmu QCOM8081:03: Registered l3cache_0_3, type: 12 [ 6.458658] qcom-l3cache-pmu QCOM8081:04: Registered l3cache_0_4, type: 13 [ 6.466899] qcom-l3cache-pmu QCOM8081:05: Registered l3cache_0_5, type: 14 [ 6.475141] qcom-l3cache-pmu QCOM8081:06: Registered l3cache_0_6, type: 15 [ 6.483385] qcom-l3cache-pmu QCOM8081:07: Registered l3cache_0_7, type: 16 [ 6.491624] qcom-l3cache-pmu QCOM8081:08: Registered l3cache_0_8, type: 17 [ 6.499865] qcom-l3cache-pmu QCOM8081:09: Registered l3cache_0_9, type: 18 [ 6.508107] qcom-l3cache-pmu QCOM8081:0a: Registered l3cache_0_10, type: 19 [ 6.516450] qcom-l3cache-pmu QCOM8081:0b: Registered l3cache_0_11, type: 20 [ 6.522858] NET: Registered protocol family 10 [ 6.535973] Segment Routing with IPv6 [ 6.538702] NET: Registered protocol family 17 [ 6.543275] Key type dns_resolver registered [ 6.547984] registered taskstats version 1 [ 6.551454] Loading compiled-in X.509 certificates [ 6.560947] Loaded X.509 cert 'Build time autogenerated kernel key: ea7718ec66a9224983a1a9a6eb5015ebf4889903' [ 6.569975] zswap: loaded using pool lzo/zbud [ 6.579809] aes_arm64: module verification failed: signature and/or required key missing - tainting kernel [ 6.595799] Key type big_key registered [ 6.598689] Key type trusted registered [ 6.606925] Key type encrypted registered [ 6.609976] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 6.616267] evm: HMAC attrs: 0x1 [ 6.619659] iommu: Adding device 0001:00:00.0 to group 0 [ 6.624918] PCI Interrupt Link [LN1A] enabled at IRQ 92 [ 6.630054] pcieport 0001:00:00.0: Signaling PME with IRQ 134 [ 6.635703] pciehp 0001:00:00.0:pcie004: Slot #1 AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surprise- Interlock+ NoCompl- LLActRep+ [ 6.648160] iommu: Adding device 0002:00:00.0 to group 1 [ 6.653460] PCI Interrupt Link [LN2A] enabled at IRQ 96 [ 6.658601] pcieport 0002:00:00.0: Signaling PME with IRQ 136 [ 6.664256] pciehp 0002:00:00.0:pcie004: Slot #2 AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surprise- Interlock+ NoCompl- LLActRep+ [ 6.676715] iommu: Adding device 0003:00:00.0 to group 2 [ 6.682024] PCI Interrupt Link [LN3A] enabled at IRQ 100 [ 6.687241] pcieport 0003:00:00.0: Signaling PME with IRQ 138 [ 6.692900] pciehp 0003:00:00.0:pcie004: Slot #4 AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surprise- Interlock+ NoCompl- LLActRep+ [ 6.705460] rtc-efi rtc-efi: setting system clock to 2018-03-01 17:46:15 UTC (1519926375) [ 6.715747] Freeing unused kernel memory: 5312K [ 6.719866] Checked W+X mappings: passed, no W+X pages found [ 6.857506] gpio gpiochip0: (QCOM8002:00): added GPIO chardev (254:0) [ 6.858440] sdhci: Secure Digital Host Controller Interface driver [ 6.858441] sdhci: Copyright(c) Pierre Ossman [ 6.873534] gpiochip_setup_dev: registered GPIOs 0 to 149 on device: gpiochip0 (QCOM8002:00) [ 6.881916] gpio gpiochip0: (QCOM8002:00): created GPIO range 0->149 ==> QCOM8002:00 PIN 0->149 [ 6.881974] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.897428] i2c_qup QCOM8010:00: tx channel not available [ 6.897485] pps_core: LinuxPPS API ver. 1 registered [ 6.897486] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 6.898159] PTP clock support registered [ 6.901682] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 6.901683] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 6.901721] pcieport 0002:00:00.0: Using QCOM ACS Quirk (1) [ 6.901742] iommu: Adding device 0002:01:00.0 to group 3 [ 6.902008] e1000e 0002:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 6.902012] e1000e 0002:01:00.0: Interrupt Mode set to 1 [ 6.969072] i2c_qup QCOM8010:01: tx channel not available [ 6.986824] pcieport 0003:00:00.0: Using QCOM ACS Quirk (1) [ 6.991469] iommu: Adding device 0003:01:00.0 to group 4 [ 6.996997] mlx5_core 0003:01:00.0: firmware version: 14.14.1100 [ 7.003302] xhci-hcd QCOM8041:00: xHCI Host Controller [ 7.005032] ipmi message handler version 39.2 [ 7.005570] ipmi device interface [ 7.006887] IPMI System Interface driver. [ 7.006902] ipmi_si: probing via SPMI [ 7.006920] ipmi_si: Unable to find any System Interface(s) [ 7.027144] IPMI SSIF Interface driver [ 7.027269] acpi IPI0001:00: GPIO: looking up 0 in _CRS [ 7.027319] ipmi_ssif: Trying ACPI-specified SSIF interface at i2c address 0x42, adapter QUP I2C adapter, slave address 0x0 [ 7.048735] xhci-hcd QCOM8041:00: new USB bus registered, assigned bus number 1 [ 7.056171] xhci-hcd QCOM8041:00: hcc params 0x0220f665 hci version 0x100 quirks 0x00010010 [ 7.064366] xhci-hcd QCOM8041:00: irq 115, io mem 0xff79800000 [ 7.070219] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.074908] e1000e 0002:01:00.0 eth0: (PCI Express:2.5GT/s:Width x4) 00:1b:21:bd:07:f0 [ 7.074909] e1000e 0002:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 7.074991] e1000e 0002:01:00.0 eth0: MAC: 0, PHY: 4, PBA No: D50868-006 [ 7.075028] pcieport 0002:00:00.0: Using QCOM ACS Quirk (1) [ 7.075046] iommu: Adding device 0002:01:00.1 to group 5 [ 7.075216] PCI Interrupt Link [LN2B] enabled at IRQ 97 [ 7.075300] e1000e 0002:01:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 7.123728] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.130932] usb usb1: Product: xHCI Host Controller [ 7.135793] usb usb1: Manufacturer: Linux 4.14.14 xhci-hcd [ 7.141262] usb usb1: SerialNumber: QCOM8041:00 [ 7.146014] hub 1-0:1.0: USB hub found [ 7.149522] hub 1-0:1.0: 1 port detected [ 7.153512] xhci-hcd QCOM8041:00: xHCI Host Controller [ 7.158542] xhci-hcd QCOM8041:00: new USB bus registered, assigned bus number 2 [ 7.165846] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 7.173925] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 7.180673] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.187877] usb usb2: Product: xHCI Host Controller [ 7.192740] usb usb2: Manufacturer: Linux 4.14.14 xhci-hcd [ 7.198206] usb usb2: SerialNumber: QCOM8041:00 [ 7.202948] hub 2-0:1.0: USB hub found [ 7.206472] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 7.213303] ipmi_ssif i2c-IPI0001:00: Found new BMC (man_id: 0x0005a9, prod_id: 0x0001, dev_id: 0x20) [ 7.223012] xhci-hcd QCOM8041:01: xHCI Host Controller [ 7.227908] xhci-hcd QCOM8041:01: new USB bus registered, assigned bus number 3 [ 7.235327] xhci-hcd QCOM8041:01: hcc params 0x0220f665 hci version 0x100 quirks 0x00010010 [ 7.243537] xhci-hcd QCOM8041:01: irq 116, io mem 0xff79a00000 [ 7.249379] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.250885] e1000e 0002:01:00.1 eth1: (PCI Express:2.5GT/s:Width x4) 00:1b:21:bd:07:f1 [ 7.250887] e1000e 0002:01:00.1 eth1: Intel(R) PRO/1000 Network Connection [ 7.250968] e1000e 0002:01:00.1 eth1: MAC: 0, PHY: 4, PBA No: D50868-006 [ 7.277547] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.284752] usb usb3: Product: xHCI Host Controller [ 7.289613] usb usb3: Manufacturer: Linux 4.14.14 xhci-hcd [ 7.295081] usb usb3: SerialNumber: QCOM8041:01 [ 7.299818] hub 3-0:1.0: USB hub found [ 7.303343] hub 3-0:1.0: 1 port detected [ 7.307323] xhci-hcd QCOM8041:01: xHCI Host Controller [ 7.312361] xhci-hcd QCOM8041:01: new USB bus registered, assigned bus number 4 [ 7.319665] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 7.327746] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 7.334492] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.341696] usb usb4: Product: xHCI Host Controller [ 7.346558] usb usb4: Manufacturer: Linux 4.14.14 xhci-hcd [ 7.352026] usb usb4: SerialNumber: QCOM8041:01 [ 7.356768] hub 4-0:1.0: USB hub found [ 7.360288] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 7.367666] hidma-mgmt QCOM8060:00: HW rev: 1.1 @ 0x000000ff98000000 with 6 physical channels [ 7.375994] hidma-mgmt QCOM8060:01: HW rev: 1.1 @ 0x000000ff9a000000 with 6 physical channels [ 7.384849] hidma QCOM8062:00: HI-DMA engine driver registration complete [ 7.391469] hidma QCOM8062:01: HI-DMA engine driver registration complete [ 7.398443] mmc0: SDHCI controller on ACPI [QCOM8051:00] using PIO [ 7.404890] mdio_bus QCOM8070:00: GPIO lookup for consumer reset [ 7.410115] mdio_bus QCOM8070:00: using lookup tables for GPIO lookup [ 7.416533] mdio_bus QCOM8070:00: lookup for GPIO reset failed [ 7.425768] libphy: emac-mdio: probed [ 7.428774] qcom-emac QCOM8070:00 eth2: hardware id 64.1, hardware version 1.3.0 [ 7.435992] ahci QCOM8090:00: SSS flag set, parallel bus scan disabled [ 7.442382] ahci QCOM8090:00: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 7.450695] ahci QCOM8090:00: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 7.460955] scsi host0: ahci [ 7.463536] ata1: SATA max UDMA/133 mmio [mem 0xff88000000-0xff880001ff] port 0x100 irq 28 [ 7.471786] ahci QCOM8090:01: SSS flag set, parallel bus scan disabled [ 7.478221] ahci QCOM8090:01: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 7.486545] ahci QCOM8090:01: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 7.496823] scsi host1: ahci [ 7.499379] ata2: SATA max UDMA/133 mmio [mem 0xff89000000-0xff890001ff] port 0x100 irq 29 [ 7.500670] mmc0: new high speed SDHC card at address aaaa [ 7.500930] mmcblk0: mmc0:aaaa SE32G 29.7 GiB [ 7.502010] mmcblk0: p1 [ 7.520091] xhci-hcd QCOM8041:02: xHCI Host Controller [ 7.525098] xhci-hcd QCOM8041:02: new USB bus registered, assigned bus number 5 [ 7.532517] xhci-hcd QCOM8041:02: hcc params 0x0220f665 hci version 0x100 quirks 0x00010010 [ 7.540723] xhci-hcd QCOM8041:02: irq 117, io mem 0xff79c00000 [ 7.546573] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.553301] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.560502] usb usb5: Product: xHCI Host Controller [ 7.565363] usb usb5: Manufacturer: Linux 4.14.14 xhci-hcd [ 7.570831] usb usb5: SerialNumber: QCOM8041:02 [ 7.575571] hub 5-0:1.0: USB hub found [ 7.579094] hub 5-0:1.0: 1 port detected [ 7.583071] xhci-hcd QCOM8041:02: xHCI Host Controller [ 7.588110] xhci-hcd QCOM8041:02: new USB bus registered, assigned bus number 6 [ 7.595416] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 7.603498] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 7.610244] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.616679] (0003:01:00.0): E-Switch: Total vports 9, per vport: max uc(1024) max mc(16384) [ 7.625780] usb usb6: Product: xHCI Host Controller [ 7.630640] usb usb6: Manufacturer: Linux 4.14.14 xhci-hcd [ 7.636111] usb usb6: SerialNumber: QCOM8041:02 [ 7.638529] mlx5_core 0003:01:00.0: Port module event: module 0, Cable plugged [ 7.648050] hub 6-0:1.0: USB hub found [ 7.651578] hub 6-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 7.653172] mlx5_core 0003:01:00.0: MLX5E: StrdRq(1) RqSz(8) StrdSz(128) RxCqeCmprss(0) [ 7.666907] xhci-hcd QCOM8041:03: xHCI Host Controller [ 7.671798] xhci-hcd QCOM8041:03: new USB bus registered, assigned bus number 7 [ 7.679221] xhci-hcd QCOM8041:03: hcc params 0x0220f665 hci version 0x100 quirks 0x00010010 [ 7.687427] xhci-hcd QCOM8041:03: irq 118, io mem 0xff79e00000 [ 7.693271] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.700002] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.707204] usb usb7: Product: xHCI Host Controller [ 7.712064] usb usb7: Manufacturer: Linux 4.14.14 xhci-hcd [ 7.717533] usb usb7: SerialNumber: QCOM8041:03 [ 7.722272] hub 7-0:1.0: USB hub found [ 7.725795] hub 7-0:1.0: 1 port detected [ 7.729769] xhci-hcd QCOM8041:03: xHCI Host Controller [ 7.734814] xhci-hcd QCOM8041:03: new USB bus registered, assigned bus number 8 [ 7.742116] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 7.750196] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003 [ 7.756943] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.764147] usb usb8: Product: xHCI Host Controller [ 7.769008] usb usb8: Manufacturer: Linux 4.14.14 xhci-hcd [ 7.771563] mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0 [ 7.780554] usb usb8: SerialNumber: QCOM8041:03 [ 7.785297] hub 8-0:1.0: USB hub found [ 7.788815] hub 8-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 7.796080] hidma-mgmt QCOM8060:02: HW rev: 1.1 @ 0x000000ff9c000000 with 6 physical channels [ 7.804505] hidma-mgmt QCOM8060:03: HW rev: 1.1 @ 0x000000ff9e000000 with 6 physical channels [ 7.813357] hidma QCOM8062:02: HI-DMA engine driver registration complete [ 7.820008] hidma QCOM8062:03: HI-DMA engine driver registration complete [ 7.826575] ahci QCOM8090:02: SSS flag set, parallel bus scan disabled [ 7.832997] ahci QCOM8090:02: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 7.841319] ahci QCOM8090:02: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 7.851515] scsi host2: ahci [ 7.854127] ata3: SATA max UDMA/133 mmio [mem 0xff8a000000-0xff8a0001ff] port 0x100 irq 30 [ 7.862416] ahci QCOM8090:03: SSS flag set, parallel bus scan disabled [ 7.868843] ahci QCOM8090:03: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 7.877169] ahci QCOM8090:03: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 7.887360] scsi host3: ahci [ 7.889979] ata4: SATA max UDMA/133 mmio [mem 0xff8b000000-0xff8b0001ff] port 0x100 irq 31 [ 7.898513] hidma QCOM8062:04: HI-DMA engine driver registration complete [ 7.905238] hidma QCOM8062:05: HI-DMA engine driver registration complete [ 7.911816] ahci QCOM8090:04: SSS flag set, parallel bus scan disabled [ 7.918238] ahci QCOM8090:04: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 7.918394] usb 5-1: new high-speed USB device number 2 using xhci-hcd [ 7.933072] ahci QCOM8090:04: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 7.943262] scsi host4: ahci [ 7.945884] ata5: SATA max UDMA/133 mmio [mem 0xff8c000000-0xff8c0001ff] port 0x100 irq 32 [ 7.946396] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.946553] ata1.00: ATA-9: Samsung SSD 845DC EVO 240GB, EXT03X3Q, max UDMA/133 [ 7.946554] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 7.946713] ata1.00: configured for UDMA/133 [ 7.946883] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 845D 3X3Q PQ: 0 ANSI: 5 [ 7.947044] ata1.00: Enabling discard_zeroes_data [ 7.947084] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.947086] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 7.947096] sd 0:0:0:0: [sda] Write Protect is off [ 7.947097] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.947110] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.947246] ata1.00: Enabling discard_zeroes_data [ 7.948697] sda: sda1 sda2 [ 7.948938] ata1.00: Enabling discard_zeroes_data [ 7.949011] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.994438] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 7.994727] ata2.00: ATA-9: MICRON_M510DC_MTFDDAK240MBP, 0013, max UDMA/133 [ 7.994729] ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 8.006599] ata2.00: configured for UDMA/133 [ 8.006812] scsi 1:0:0:0: Direct-Access ATA MICRON_M510DC_MT 0013 PQ: 0 ANSI: 5 [ 8.007057] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 8.007059] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 8.007067] sd 1:0:0:0: [sdb] Write Protect is off [ 8.007068] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 8.007080] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.007096] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 8.008465] sdb: sdb1 sdb2 [ 8.008840] sd 1:0:0:0: [sdb] Attached SCSI disk [ 8.062436] usb 7-1: new high-speed USB device number 2 using xhci-hcd [ 8.066528] usb 5-1: New USB device found, idVendor=0424, idProduct=2514 [ 8.066530] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 8.075495] hub 5-1:1.0: USB hub found [ 8.075588] hub 5-1:1.0: 4 ports detected [ 8.144204] ahci QCOM8090:05: SSS flag set, parallel bus scan disabled [ 8.150621] ahci QCOM8090:05: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 8.158942] ahci QCOM8090:05: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 8.169118] scsi host5: ahci [ 8.171761] ata6: SATA max UDMA/133 mmio [mem 0xff8d000000-0xff8d0001ff] port 0x100 irq 33 [ 8.177537] ata3: SATA link down (SStatus 0 SControl 300) [ 8.185657] hidma QCOM8062:06: HI-DMA engine driver registration complete [ 8.192400] hidma QCOM8062:07: HI-DMA engine driver registration complete [ 8.198968] ahci QCOM8090:06: SSS flag set, parallel bus scan disabled [ 8.205391] ahci QCOM8090:06: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 8.211069] usb 7-1: New USB device found, idVendor=0624, idProduct=0249 [ 8.211071] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.211072] usb 7-1: Product: USB Composite Device-1 [ 8.211073] usb 7-1: Manufacturer: Avocent [ 8.211074] usb 7-1: SerialNumber: 20120430-1 [ 8.213502] ata4: SATA link down (SStatus 0 SControl 300) [ 8.230972] usb-storage 7-1:1.0: USB Mass Storage device detected [ 8.231295] scsi host6: usb-storage 7-1:1.0 [ 8.231383] usbcore: registered new interface driver usb-storage [ 8.232101] usbcore: registered new interface driver uas [ 8.267795] ahci QCOM8090:06: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 8.278070] scsi host7: ahci [ 8.280632] ata7: SATA max UDMA/133 mmio [mem 0xff8e000000-0xff8e0001ff] port 0x100 irq 34 [ 8.288996] ahci QCOM8090:07: SSS flag set, parallel bus scan disabled [ 8.295327] ahci QCOM8090:07: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 8.303646] ahci QCOM8090:07: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part ccc sadm sds apst [ 8.313887] scsi host8: ahci [ 8.316478] ata8: SATA max UDMA/133 mmio [mem 0xff8f000000-0xff8f0001ff] port 0x100 irq 35 [ 8.324979] hidma QCOM8062:08: HI-DMA engine driver registration complete [ 8.331720] hidma QCOM8062:09: HI-DMA engine driver registration complete [ 8.338490] hidma QCOM8062:0a: HI-DMA engine driver registration complete [ 8.345254] hidma QCOM8062:0b: HI-DMA engine driver registration complete [ 8.352021] hidma QCOM8062:0c: HI-DMA engine driver registration complete [ 8.358797] hidma QCOM8062:0d: HI-DMA engine driver registration complete [ 8.365571] hidma QCOM8062:0e: HI-DMA engine driver registration complete [ 8.372345] hidma QCOM8062:0f: HI-DMA engine driver registration complete [ 8.379114] hidma QCOM8062:10: HI-DMA engine driver registration complete [ 8.385884] hidma QCOM8062:11: HI-DMA engine driver registration complete [ 8.392768] hidma QCOM8062:12: HI-DMA engine driver registration complete [ 8.394434] usb 5-1.1: new full-speed USB device number 3 using xhci-hcd [ 8.406217] hidma QCOM8062:13: HI-DMA engine driver registration complete [ 8.412986] hidma QCOM8062:14: HI-DMA engine driver registration complete [ 8.419766] hidma QCOM8062:15: HI-DMA engine driver registration complete [ 8.426550] hidma QCOM8062:16: HI-DMA engine driver registration complete [ 8.433306] hidma QCOM8062:17: HI-DMA engine driver registration complete [ 8.458283] ata5: SATA link down (SStatus 0 SControl 300) [ 8.495527] usb 5-1.1: New USB device found, idVendor=0624, idProduct=0248 [ 8.501353] ata6: SATA link down (SStatus 0 SControl 300) [ 8.506824] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 8.514116] usb 5-1.1: Product: USB Composite Device-0 [ 8.519236] usb 5-1.1: Manufacturer: Avocent [ 8.523490] usb 5-1.1: SerialNumber: 20120430 [ 8.577488] hidraw: raw HID events driver (C) Jiri Kosina [ 8.585201] usbcore: registered new interface driver usbhid [ 8.589823] usbhid: USB HID core driver [ 8.594555] input: Avocent USB Composite Device-0 as /devices/platform/QCOM8041:02/usb5/5-1/5-1.1/5-1.1:1.0/0003:0624:0248.0001/input/input0 [ 8.601357] ata7: SATA link down (SStatus 0 SControl 300) [ 8.637117] ata8: SATA link down (SStatus 0 SControl 300) [ 8.670526] hid-generic 0003:0624:0248.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-QCOM8041:02-1.1/input0 [ 8.682701] input: Avocent USB Composite Device-0 as /devices/platform/QCOM8041:02/usb5/5-1/5-1.1/5-1.1:1.1/0003:0624:0248.0002/input/input1 [ 8.695310] hid-generic 0003:0624:0248.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-QCOM8041:02-1.1/input1 [ 8.708034] input: Avocent USB Composite Device-0 as /devices/platform/QCOM8041:02/usb5/5-1/5-1.1/5-1.1:1.2/0003:0624:0248.0003/input/input2 [ 8.720673] hid-generic 0003:0624:0248.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-QCOM8041:02-1.1/input2 [ 8.848478] usb 5-1.2: new full-speed USB device number 4 using xhci-hcd [ 8.960857] usb 5-1.2: New USB device found, idVendor=05c6, idProduct=9302 [ 8.966774] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=128 [ 8.974236] usb 5-1.2: Product: Embedded Power Measurement (EPM) device [ 8.980833] usb 5-1.2: Manufacturer: QUALCOMM Inc. [ 8.985607] usb 5-1.2: SerialNumber: 070E0AF902165400 [ 9.006935] cdc_acm 5-1.2:1.1: ttyACM0: USB ACM device [ 9.011447] usbcore: registered new interface driver cdc_acm [ 9.016764] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 9.255031] scsi 6:0:0:0: CD-ROM MP EMS Virtual Media 0399 PQ: 0 ANSI: 0 [ 9.262574] scsi 6:0:0:1: Direct-Access MP EMS Virtual Media 0399 PQ: 0 ANSI: 0 CCS [ 9.270977] scsi 6:0:0:2: Direct-Access MP EMS Virtual Media 0399 PQ: 0 ANSI: 0 CCS [ 9.280158] sr 6:0:0:0: [sr0] scsi3-mmc drive: 0x/0x cd/rw caddy [ 9.285209] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 9.290635] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 9.295190] sr 6:0:0:0: Attached scsi generic sg2 type 5 [ 9.300612] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 9.301385] sd 6:0:0:1: [sdc] Attached SCSI removable disk [ 9.311385] sd 6:0:0:2: Attached scsi generic sg4 type 0 [ 9.312173] sd 6:0:0:2: [sdd] Attached SCSI removable disk [ 9.994434] raid6: int64x1 gen() 2373 MB/s [ 10.062439] raid6: int64x1 xor() 1780 MB/s [ 10.130445] raid6: int64x2 gen() 2948 MB/s [ 10.198437] raid6: int64x2 xor() 2336 MB/s [ 10.266443] raid6: int64x4 gen() 3502 MB/s [ 10.334431] raid6: int64x4 xor() 2538 MB/s [ 10.402436] raid6: int64x8 gen() 4172 MB/s [ 10.470439] raid6: int64x8 xor() 2596 MB/s [ 10.538444] raid6: neonx1 gen() 2833 MB/s [ 10.606426] raid6: neonx1 xor() 3892 MB/s [ 10.674442] raid6: neonx2 gen() 4034 MB/s [ 10.742434] raid6: neonx2 xor() 4232 MB/s [ 10.810432] raid6: neonx4 gen() 4847 MB/s [ 10.878430] raid6: neonx4 xor() 4538 MB/s [ 10.946432] raid6: neonx8 gen() 5038 MB/s [ 11.014433] raid6: neonx8 xor() 4434 MB/s [ 11.017737] raid6: using algorithm neonx8 gen() 5038 MB/s [ 11.023123] raid6: .... xor() 4434 MB/s, rmw enabled [ 11.028070] raid6: using neon recovery algorithm [ 11.033204] async_tx: api initialized (async) [ 11.037353] xor: measuring software checksum speed [ 11.078434] 8regs : 10620.000 MB/sec [ 11.118432] 8regs_prefetch: 10027.000 MB/sec [ 11.158433] 32regs : 14488.000 MB/sec [ 11.198432] 32regs_prefetch: 13416.000 MB/sec [ 11.202084] xor: using function: 32regs (14488.000 MB/sec) [ 11.260065] Btrfs loaded, crc32c=crc32c-arm64-ce [ 11.359632] random: crng init done [ 11.662365] mlx5_core 0003:01:00.0 eth3: Link down [ 11.667695] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 11.950708] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 12.050489] Atheros 8031 ethernet QCOM8070:00:04: attached PHY driver [Atheros 8031 ethernet] (mii_bus:phy_addr=QCOM8070:00:04, irq=POLL) [ 12.061915] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 12.338678] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.063496] qcom-emac QCOM8070:00 eth2: Link is Down [ 14.367343] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 14.374111] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 16.134555] qcom-emac QCOM8070:00 eth2: Link is Up - 1Gbps/Full - flow control rx/tx [ 16.141345] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 16.660152] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 16.847418] e1000e: eth0 NIC Link is Down [ 17.023480] e1000e: eth1 NIC Link is Down [ 17.427619] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 17.445036] systemd[1]: Detected architecture arm64. [ 17.462635] systemd[1]: Set hostname to . [ 17.541621] systemd[1]: Listening on Journal Socket (/dev/log). [ 17.558539] systemd[1]: Listening on Journal Socket. [ 17.576784] systemd[1]: Created slice System Slice. [ 17.590473] systemd[1]: Listening on udev Kernel Socket. [ 17.606511] systemd[1]: Listening on LVM2 metadata daemon socket. [ 17.622505] systemd[1]: Listening on fsck to fsckd communication Socket. [ 17.642492] systemd[1]: Started Trigger resolvconf update for networkd DNS. [ 17.760996] RPC: Registered named UNIX socket transport module. [ 17.765964] RPC: Registered udp transport module. [ 17.770643] RPC: Registered tcp transport module. [ 17.774296] Loading iSCSI transport class v2.0-870. [ 17.780190] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 17.793573] iscsi: registered transport (tcp) [ 17.842957] iscsi: registered transport (iser) [ 18.997903] systemd-journald[955]: Received request to flush runtime journal from PID 1 [ 19.203467] IPMI System Interface driver. [ 19.203557] ipmi_si: probing via SPMI [ 19.203646] ipmi_si: Unable to find any System Interface(s) [ 19.398397] IPMI System Interface driver. [ 19.398908] ipmi_si: probing via SPMI [ 19.399685] ipmi_si: Unable to find any System Interface(s) [ 19.784510] new mount options do not match the existing superblock, will be ignored [ 19.907228] new mount options do not match the existing superblock, will be ignored [ 22.534445] ip_tables: (C) 2000-2006 Netfilter Core Team [ 22.948007] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 23.369380] Ebtables v2.0 registered [ 24.380409] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 24.458521] virbr0: port 1(virbr0-nic) entered blocking state [ 24.458524] virbr0: port 1(virbr0-nic) entered disabled state [ 24.458600] device virbr0-nic entered promiscuous mode [ 27.940673] nf_conntrack version 0.5.0 (65536 buckets, 262144 max) [ 30.344989] virbr0: port 1(virbr0-nic) entered blocking state [ 30.344993] virbr0: port 1(virbr0-nic) entered listening state [ 31.841560] virbr0: port 1(virbr0-nic) entered disabled state