lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 14 Mar 2018 14:50:50 -0600
From:   Keith Busch <keith.busch@...el.com>
To:     Sinan Kaya <okaya@...eaurora.org>
Cc:     Bjorn Helgaas <helgaas@...nel.org>,
        Oza Pawandeep <poza@...eaurora.org>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Philippe Ombredanne <pombredanne@...b.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Kate Stewart <kstewart@...uxfoundation.org>,
        linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
        Dongdong Liu <liudongdong3@...wei.com>,
        Wei Zhang <wzhang@...com>, Timur Tabi <timur@...eaurora.org>,
        Alex Williamson <alex.williamson@...hat.com>
Subject: Re: [PATCH v12 0/6] Address error and recovery for AER and DPC

On Mon, Mar 12, 2018 at 11:47:12PM -0400, Sinan Kaya wrote:
> 
> The spec is recommending code to use "Hotplug Surprise" to differentiate
> these two cases we are looking for. 
> 
> The use case Keith is looking for is for hotplug support. 
> The case I and Oza are more interested is for error handling on platforms
> with no hotplug support.
> 
> According to the spec, if "Hotplug Surprise" is set in slot capabilities,
> then hotplug driver handles link up and DPC driver doesn't interfere with
> its operation. Hotplug driver observes link up interrupt like it is doing today.
> When link up event is observed, hotplug driver will do the enumeration.
> 
> If "Hotplug Surprise" bit is not set, it is the job of the DPC driver to
> bring up the link. I believe this path should follow the AER driver path
> as there is a very well defined error reporting and recovery framework
> in the code.
> 
> The link comes back up automatically when DPC driver handles its interrupt
> very similar to what secondary bus reset does for AER. I don't believe
> there is a hotplug possibility under this condition since it is not supported
> to begin with.
> 
> Should we plumb the "Hotplug Surprise" condition into the code to satisfy
> both cases and leave the error handling path according to this code series?

I'm on board with this, but I think you mean "Hotplug Capable" rather
than "Hotplug Surprise". The former may co-exist with DPC and handles
the link-ups, leaving DPC responsible for handling the link-down.

The "Hotplug Surprise" capability is recommended to not co-exist with DPC
since that capability may suppress the "surprise link down" notification
that DPC needs to see in order to trigger.

If the "Hotplug Capable" bit is not set, detecting the link-up after a
DPC event would have to fall under a different component's responsibility,
so I think I'm finally seeing your point.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ