lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 14 Mar 2018 13:48:51 +0100
From:   Martin Steigerwald <martin@...htvoll.de>
To:     Hans de Goede <hdegoede@...hat.com>
Cc:     Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Thorsten Leemhuis <regressions@...mhuis.info>,
        Tejun Heo <tj@...nel.org>
Subject: Re: [Possible REGRESSION, 4.16-rc4] Error updating SMART data during runtime and could not connect to lvmetad at some boot attempts

Hans de Goede - 14.03.18, 12:05:
> Hi,
> 
> On 14-03-18 12:01, Martin Steigerwald wrote:
> > Hans de Goede - 11.03.18, 15:37:
> >> Hi Martin,
> >> 
> >> On 11-03-18 09:20, Martin Steigerwald wrote:
> >>> Hello.
> >>> 
> >>> Since 4.16-rc4 (upgraded from 4.15.2 which worked) I have an issue
> >>> with SMART checks occassionally failing like this:
> >>> 
> >>> smartd[28017]: Device: /dev/sdb [SAT], is in SLEEP mode, suspending
> >>> checks
> >>> udisksd[24408]: Error performing housekeeping for drive
> >>> /org/freedesktop/UDisks2/drives/INTEL_SSDSA2CW300G3_[…]: Error updating
> >>> SMART data: Error sending ATA command CHECK POWER MODE: Unexpected sense
> >>> data returned:#0120000: 0e 09 0c 00  00 00 ff 00  00 00 00 00  00 00 50
> >>> 00    ..............P.#0120010: 00 00 00 00  00 00 00 00  00 00 00 00 
> >>> 00
> >>> 00 00 00    ................#012 (g-io-error-quark, 0) merkaba
> >>> udisksd[24408]: Error performing housekeeping for drive
> >>> /org/freedesktop/UDisks2/drives/Crucial_CT480M500SSD3_[…]: Error
> >>> updating
> >>> SMART dat a: Error sending ATA command CHECK POWER MODE: Unexpected
> >>> sense
> >>> data returned:#0120000: 01 00 1d 00  00 00 0e 09  0c 00 00 00  ff 00 00
> >>> 00    ................#0120010: 00 0 0 00 00  50 00 00 00  00 00 00 00
> >>> 00 00 00 00    ....P...........#012 (g-io-error-quark, 0)
> >>> 
> >>> (Intel SSD is connected via SATA, Crucial via mSATA in a ThinkPad T520)
> >>> 
> >>> However when I then check manually with smartctl -a | -x | -H the device
> >>> reports SMART data just fine.
> >>> 
> >>> As smartd correctly detects that device is in sleep mode, this may be an
> >>> userspace issue in udisksd.
> >>> 
> >>> Also at some boot attempts the boot hangs with a message like "could not
> >>> connect to lvmetad, scanning manually for devices". I use BTRFS RAID 1
> >>> on to LVs (each on one of the SSDs). A configuration that requires a
> >>> manual
> >>> adaption to InitRAMFS in order to boot (basically vgchange -ay before
> >>> btrfs device scan).
> >>> 
> >>> I wonder whether that has to do with the new SATA LPM policy stuff, but
> >>> as
> >>> I had issues with
> >>> 
> >>> 3 => Medium power with Device Initiated PM enabled
> >>> 
> >>> (machine did not boot, which could also have been caused by me
> >>> accidentally
> >>> removing all TCP/IP network support in the kernel with that setting)
> >>> 
> >>> I set it back to
> >>> 
> >>> CONFIG_SATA_MOBILE_LPM_POLICY=0
> >>> 
> >>> (firmware settings)
> >> 
> >> Right, so at that settings the LPM policy changes are effectively
> >> disabled and cannot explain your SMART issues.
> >> 
> >> Still I would like to zoom in on this part of your bug report, because
> >> for Fedora 28 we are planning to ship with
> >> CONFIG_SATA_MOBILE_LPM_POLICY=3
> >> and AFAIK Ubuntu has similar plans.
> >> 
> >> I suspect that the issue you were seeing with
> >> CONFIG_SATA_MOBILE_LPM_POLICY=3 were with the Crucial disk ? I've
> >> attached
> >> a patch for you to test, which disabled LPM for your model Crucial SSD
> >> (but
> >> keeps it on for the Intel disk) if you can confirm that with that patch
> >> you
> >> can run with
> >> CONFIG_SATA_MOBILE_LPM_POLICY=3 without issues that would be great.
> > 
> > With 4.16-rc5 with CONFIG_SATA_MOBILE_LPM_POLICY=3 the system successfully
> > booted three times in a row. So feel free to add tested-by.
> 
> Thanks.
> 
> To be clear, you're talking about 4.16-rc5 with the patch I made to
> blacklist the Crucial disk I assume, not just plain 4.16-rc5, right ?

4.16-rc5 with your

0001-libata-Apply-NOLPM-quirk-to-Crucial-M500-480GB-SSDs.patch

patch.

Thanks,
-- 
Martin

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ