lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 28 Mar 2018 19:02:35 -0600
From:   Jens Axboe <axboe@...nel.dk>
To:     "Zephaniah E. Loss-Cutler-Hull" <warp-spam_kernel@...allh.com>,
        linux-kernel@...r.kernel.org, linux-block@...r.kernel.org,
        linux-scsi@...r.kernel.org
Subject: Re: General protection fault with use_blk_mq=1.

On 3/28/18 5:03 PM, Zephaniah E. Loss-Cutler-Hull wrote:
> I am not subscribed to any of the lists on the To list here, please CC
> me on any replies.
> 
> I am encountering a fairly consistent crash anywhere from 15 minutes to
> 12 hours after boot with scsi_mod.use_blk_mq=1 dm_mod.use_blk_mq=1> 
> The crash looks like:
> 
> [ 5466.075993] general protection fault: 0000 [#1] PREEMPT SMP PTI
> [ 5466.075997] Modules linked in: esp4 xfrm4_mode_tunnel fuse usblp
> uvcvideo pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O)
> ip6table_filter ip6_tables xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4
> xt_conntrack nf_conntrack iptable_filter ip_tables x_tables intel_rapl
> joydev serio_raw wmi_bmof iwldvm iwlwifi shpchp kvm_intel kvm irqbypass
> autofs4 algif_skcipher nls_iso8859_1 nls_cp437 crc32_pclmul
> ghash_clmulni_intel
> [ 5466.076022] CPU: 3 PID: 10573 Comm: pool Tainted: G           O    
> 4.15.13-f1-dirty #148
> [ 5466.076024] Hardware name: Hewlett-Packard HP EliteBook Folio
> 9470m/18DF, BIOS 68IBD Ver. F.44 05/22/2013
> [ 5466.076029] RIP: 0010:percpu_counter_add_batch+0x2b/0xb0
> [ 5466.076031] RSP: 0018:ffffa556c47afb58 EFLAGS: 00010002
> [ 5466.076033] RAX: ffff95cda87ce018 RBX: ffff95cda87cdb68 RCX:
> 0000000000000000
> [ 5466.076034] RDX: 000000003fffffff RSI: ffffffff896495c4 RDI:
> ffffffff895b2bed
> [ 5466.076036] RBP: 000000003fffffff R08: 0000000000000000 R09:
> ffff95cb7d5f8148
> [ 5466.076037] R10: 0000000000000200 R11: 0000000000000000 R12:
> 0000000000000001
> [ 5466.076038] R13: ffff95cda87ce088 R14: ffff95cda6ebd100 R15:
> ffffa556c47afc58
> [ 5466.076040] FS:  00007f25f5305700(0000) GS:ffff95cdbeac0000(0000)
> knlGS:0000000000000000
> [ 5466.076042] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 5466.076043] CR2: 00007f25e807e0a8 CR3: 00000003ed5a6001 CR4:
> 00000000001606e0
> [ 5466.076044] Call Trace:
> [ 5466.076050]  bfqg_stats_update_io_add+0x58/0x100
> [ 5466.076055]  bfq_insert_requests+0xec/0xd80
> [ 5466.076059]  ? blk_rq_append_bio+0x8f/0xa0
> [ 5466.076061]  ? blk_rq_map_user_iov+0xc3/0x1d0
> [ 5466.076065]  blk_mq_sched_insert_request+0xa3/0x130
> [ 5466.076068]  blk_execute_rq+0x3a/0x50
> [ 5466.076070]  sg_io+0x197/0x3e0
> [ 5466.076073]  ? dput+0xca/0x210
> [ 5466.076077]  ? mntput_no_expire+0x11/0x1a0
> [ 5466.076079]  scsi_cmd_ioctl+0x289/0x400
> [ 5466.076082]  ? filename_lookup+0xe1/0x170
> [ 5466.076085]  sd_ioctl+0xc7/0x1a0
> [ 5466.076088]  blkdev_ioctl+0x4d4/0x8c0
> [ 5466.076091]  block_ioctl+0x39/0x40
> [ 5466.076094]  do_vfs_ioctl+0x92/0x5e0
> [ 5466.076097]  ? __fget+0x73/0xc0
> [ 5466.076099]  SyS_ioctl+0x74/0x80
> [ 5466.076102]  do_syscall_64+0x60/0x110
> [ 5466.076106]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
> [ 5466.076109] RIP: 0033:0x7f25f75fef47
> [ 5466.076110] RSP: 002b:00007f25f53049a8 EFLAGS: 00000246 ORIG_RAX:
> 0000000000000010
> [ 5466.076112] RAX: ffffffffffffffda RBX: 000000000000000c RCX:
> 00007f25f75fef47
> [ 5466.076114] RDX: 00007f25f53049b0 RSI: 0000000000002285 RDI:
> 000000000000000c
> [ 5466.076115] RBP: 0000000000000010 R08: 00007f25e8007818 R09:
> 0000000000000200
> [ 5466.076116] R10: 0000000000000001 R11: 0000000000000246 R12:
> 0000000000000000
> [ 5466.076118] R13: 0000000000000000 R14: 00007f25f8a6b5e0 R15:
> 00007f25e80173e0
> [ 5466.076120] Code: 41 55 49 89 fd bf 01 00 00 00 41 54 49 89 f4 55 89
> d5 53 e8 18 e1 bb ff 48 c7 c7 c4 95 64 89 e8 dc e9 fb ff 49 8b 45 20 48
> 63 d5 <65> 8b 18 48 63 db 4c 01 e3 48 39 d3 7d 0a f7 dd 48 63 ed 48 39
> [ 5466.076147] RIP: percpu_counter_add_batch+0x2b/0xb0 RSP: ffffa556c47afb58
> [ 5466.076149] ---[ end trace 8d7eb80aafef4494 ]---
> [ 5466.670153] note: pool[10573] exited with preempt_count 2
> 
> (I only have the one instance right this minute as a result of not
> having remote syslog setup before now.)
> 
> This is clearly deep in the blk_mq code, and it goes away when I remove
> the use_blk_mq kernel command line parameters.
> 
> My next obvious step is to try and disable the load of the vbox modules.
> 
> I can include the full dmesg output if it would be helpful.
> 
> The system is an older HP Ultrabook, and the root partition is, sda1 (a
> SSD) -> a LUKS encrypted partition -> LVM -> BTRFS.
> 
> The kernel is a stock 4.15.11, however I only recently added the blk_mq
> options, so while I can state that I have seen this on multiple kernels
> in the 4.15.x series, I have not tested earlier kernels in this
> configuration.
> 
> Looking through the code, I'd guess that this is dying inside
> blkg_rwstat_add, which calls percpu_counter_add_batch, which is what RIP
> is pointing at.

Leaving the whole thing here for Paolo - it's crashing off insertion of
a request coming out of SG_IO. Don't think we've seen this BFQ failure
case before.

You can mitigate this by switching the scsi-mq devices to mq-deadline
instead.

-- 
Jens Axboe

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ