| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 18 Apr 2018 14:11:29 +0530
From: Srinath Mannam <srinath.mannam@...adcom.com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Scott Branden <scott.branden@...adcom.com>,
Ray Jui <ray.jui@...adcom.com>,
Florian Fainelli <f.fainelli@...il.com>,
bcm-kernel-feedback-list@...adcom.com
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Srinath Mannam <srinath.mannam@...adcom.com>
Subject: [PATCH] arm64: dts: correct SATA addresses for Stingray
Correct all SATA ahci and phy controller register
addresses and interrupt lines to proper values.
Fixes: 344a2e514182 ("arm64: dts: Add SATA DT nodes for Stingray SoC")
Signed-off-by: Srinath Mannam <srinath.mannam@...adcom.com>
Reviewed-by: Ray Jui <ray.jui@...adcom.com>
Reviewed-by: Scott Branden <scott.branden@...adcom.com>
Reviewed-by: Andrew Gospodarek <andrew.gospodarek@...adcom.com>
---
.../boot/dts/broadcom/stingray/stingray-sata.dtsi | 80 +++++++++++-----------
1 file changed, 40 insertions(+), 40 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
index 4b5465d..8c68e0c 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
@@ -36,11 +36,11 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x67d00000 0x00800000>;
- sata0: ahci@...000 {
+ sata0: ahci@0 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00210000 0x1000>;
+ reg = <0x00000000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -52,9 +52,9 @@
};
};
- sata_phy0: sata_phy@...100 {
+ sata_phy0: sata_phy@...0 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00212100 0x1000>;
+ reg = <0x00002100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -66,11 +66,11 @@
};
};
- sata1: ahci@...000 {
+ sata1: ahci@...00 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00310000 0x1000>;
+ reg = <0x00010000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -82,9 +82,9 @@
};
};
- sata_phy1: sata_phy@...100 {
+ sata_phy1: sata_phy@...00 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00312100 0x1000>;
+ reg = <0x00012100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -96,11 +96,11 @@
};
};
- sata2: ahci@...000 {
+ sata2: ahci@...00 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00120000 0x1000>;
+ reg = <0x00020000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -112,9 +112,9 @@
};
};
- sata_phy2: sata_phy@...100 {
+ sata_phy2: sata_phy@...00 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00122100 0x1000>;
+ reg = <0x00022100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -126,11 +126,11 @@
};
};
- sata3: ahci@...000 {
+ sata3: ahci@...00 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00130000 0x1000>;
+ reg = <0x00030000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -142,9 +142,9 @@
};
};
- sata_phy3: sata_phy@...100 {
+ sata_phy3: sata_phy@...00 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00132100 0x1000>;
+ reg = <0x00032100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -156,11 +156,11 @@
};
};
- sata4: ahci@...000 {
+ sata4: ahci@...000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00330000 0x1000>;
+ reg = <0x00100000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -172,9 +172,9 @@
};
};
- sata_phy4: sata_phy@...100 {
+ sata_phy4: sata_phy@...100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00332100 0x1000>;
+ reg = <0x00102100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -186,11 +186,11 @@
};
};
- sata5: ahci@...000 {
+ sata5: ahci@...000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00400000 0x1000>;
+ reg = <0x00110000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -202,9 +202,9 @@
};
};
- sata_phy5: sata_phy@...100 {
+ sata_phy5: sata_phy@...100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00402100 0x1000>;
+ reg = <0x00112100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -216,11 +216,11 @@
};
};
- sata6: ahci@...000 {
+ sata6: ahci@...000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00410000 0x1000>;
+ reg = <0x00120000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -232,9 +232,9 @@
};
};
- sata_phy6: sata_phy@...100 {
+ sata_phy6: sata_phy@...100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00412100 0x1000>;
+ reg = <0x00122100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
@@ -246,11 +246,11 @@
};
};
- sata7: ahci@...000 {
+ sata7: ahci@...000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
- reg = <0x00420000 0x1000>;
+ reg = <0x00130000 0x1000>;
reg-names = "ahci";
- interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -262,9 +262,9 @@
};
};
- sata_phy7: sata_phy@...100 {
+ sata_phy7: sata_phy@...100 {
compatible = "brcm,iproc-sr-sata-phy";
- reg = <0x00422100 0x1000>;
+ reg = <0x00132100 0x1000>;
reg-names = "phy";
#address-cells = <1>;
#size-cells = <0>;
--
2.7.4
Powered by blists - more mailing lists