lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Thu, 19 Apr 2018 20:06:52 -0500 From: Rob Herring <robh+dt@...nel.org> To: Lukasz Majewski <lukma@...x.de> Cc: Mark Rutland <mark.rutland@....com>, Shawn Guo <shawnguo@...nel.org>, Sascha Hauer <kernel@...gutronix.de>, Fabio Estevam <fabio.estevam@....com>, "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>, devicetree@...r.kernel.org, "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" <linux-arm-kernel@...ts.infradead.org> Subject: Re: [PATCH v6] ARM: dts: tpc: Device tree description of the iMX6Q TPC board On Thu, Apr 19, 2018 at 9:32 AM, Lukasz Majewski <lukma@...x.de> wrote: > This commit adds device tree description of Kieback & Peter GmbH > iMX6Q TPC board. > > Signed-off-by: Lukasz Majewski <lukma@...x.de> > Reviewed-by: Fabio Estevam <fabio.estevam@....com> > > --- > Changes for v6: > - Add space between // and SPDX > - Replace 'disp0' with 'display' > - Replace 'rtc: ds1307@32' with 'ds1307: rtc@32' > - Replace 'codec: audio-codec@a' with 'sgtl5000: audio-codec@a' > - Move &can[12] nodes extension to proper position to be alphabetically sorted > > Changes for v5: > - Use 'interpolation-steps' to fill the brightness level table > - Remove not needed status = "okay" properties > - Replace goodix_ts -> touchscreen > - Replace sgtl5000 -> audio-codec > > This patch depends on PWM backlight intepolation work: > https://patchwork.kernel.org/patch/10330775/ > https://patchwork.kernel.org/patch/10330777/ > > Changes for v4: > - Remove not needed bus-format-override = "rgb565"; > property > > Changes for v3: > - Provide proper compatible for RTC DTS node > - Remove wrong comment style for beeper > - Add proper SPDX entries for DTS files > - Add vendor prefix to a separate patch > > Changes for v2: > - SPDX license identifiers used > - Separate regulators > - Proper beeper driver > - Use of the lcd panel (with compatible) instead of timings provided in > device tree > - Add IRQ types (like IRQ_TYPE_EDGE_FALLING) and GPIO active levels (like > GPIO_ACTIVE_HIGH) > - Remove not needed nodes > - Make W=1 dtbs compilation with no errors > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/imx6q-kp-tpc.dts | 22 ++ > arch/arm/boot/dts/imx6q-kp.dtsi | 432 +++++++++++++++++++++++++++++++++++++ > 3 files changed, 455 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6q-kp-tpc.dts > create mode 100644 arch/arm/boot/dts/imx6q-kp.dtsi Reviewed-by: Rob Herring <robh@...nel.org>
Powered by blists - more mailing lists