| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 23 Apr 2018 17:05:19 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Rob Herring <robh@...nel.org>
Cc: devicetree@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Vinod Koul <vinod.koul@...el.com>,
Mark Rutland <mark.rutland@....com>,
Ralf Baechle <ralf@...ux-mips.org>,
James Hogan <jhogan@...nel.org>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Boris Brezillon <boris.brezillon@...tlin.com>,
Marek Vasut <marek.vasut@...il.com>,
Richard Weinberger <richard@....at>,
Matthias Brugger <matthias.bgg@...il.com>,
Tanmay Inamdar <tinamdar@....com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Rodolfo Giometti <giometti@...eenne.com>
Subject: Re: [PATCH] dt-bindings: more status property removal from examples
On 17 April 2018 at 15:57, Rob Herring <robh@...nel.org> wrote:
> Whack-a-mole some more occurrences of status in examples.
>
> Cc: Vinod Koul <vinod.koul@...el.com>
> Cc: Mark Rutland <mark.rutland@....com>
> Cc: Ralf Baechle <ralf@...ux-mips.org>
> Cc: James Hogan <jhogan@...nel.org>
> Cc: Ulf Hansson <ulf.hansson@...aro.org>
> Cc: David Woodhouse <dwmw2@...radead.org>
> Cc: Brian Norris <computersforpeace@...il.com>
> Cc: Boris Brezillon <boris.brezillon@...tlin.com>
> Cc: Marek Vasut <marek.vasut@...il.com>
> Cc: Richard Weinberger <richard@....at>
> Cc: Matthias Brugger <matthias.bgg@...il.com>
> Cc: Tanmay Inamdar <tinamdar@....com>
> Cc: Bjorn Helgaas <bhelgaas@...gle.com>
> Cc: Rodolfo Giometti <giometti@...eenne.com>
> Signed-off-by: Rob Herring <robh@...nel.org>
> ---
> Documentation/devicetree/bindings/dma/k3dma.txt | 1 -
> Documentation/devicetree/bindings/dma/ti-edma.txt | 1 -
> Documentation/devicetree/bindings/mips/lantiq/rcu.txt | 2 --
> Documentation/devicetree/bindings/mmc/tmio_mmc.txt | 4 ----
> Documentation/devicetree/bindings/mtd/mtk-nand.txt | 4 ----
> Documentation/devicetree/bindings/pci/xgene-pci.txt | 7 -------
> Documentation/devicetree/bindings/pps/pps-gpio.txt | 1 -
> 7 files changed, 20 deletions(-)
For mmc:
Acked-by: Ulf Hansson <ulf.hansson@...aro.org>
Kind regards
Uffe
>
> diff --git a/Documentation/devicetree/bindings/dma/k3dma.txt b/Documentation/devicetree/bindings/dma/k3dma.txt
> index 23f8d712c3ce..4945aeac4dc4 100644
> --- a/Documentation/devicetree/bindings/dma/k3dma.txt
> +++ b/Documentation/devicetree/bindings/dma/k3dma.txt
> @@ -23,7 +23,6 @@ Controller:
> dma-requests = <27>;
> interrupts = <0 12 4>;
> clocks = <&pclk>;
> - status = "disable";
> };
>
> Client:
> diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
> index 66026dcf53e1..3f15f6644527 100644
> --- a/Documentation/devicetree/bindings/dma/ti-edma.txt
> +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
> @@ -190,7 +190,6 @@ mmc0: mmc@...00000 {
> power-domains = <&k2g_pds 0xb>;
> clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
> clock-names = "fck", "mmchsdb_fck";
> - status = "disabled";
> };
>
> ------------------------------------------------------------------------------
> diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
> index a086f1e1cdd7..7f0822b4beae 100644
> --- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
> +++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
> @@ -61,7 +61,6 @@ Example of the RCU bindings on a xRX200 SoC:
> usb_phy0: usb2-phy@18 {
> compatible = "lantiq,xrx200-usb2-phy";
> reg = <0x18 4>, <0x38 4>;
> - status = "disabled";
>
> resets = <&reset1 4 4>, <&reset0 4 4>;
> reset-names = "phy", "ctrl";
> @@ -71,7 +70,6 @@ Example of the RCU bindings on a xRX200 SoC:
> usb_phy1: usb2-phy@34 {
> compatible = "lantiq,xrx200-usb2-phy";
> reg = <0x34 4>, <0x3C 4>;
> - status = "disabled";
>
> resets = <&reset1 5 4>, <&reset0 4 4>;
> reset-names = "phy", "ctrl";
> diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> index 2d5287eeed95..634bb66fc49c 100644
> --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
> @@ -67,7 +67,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
> max-frequency = <195000000>;
> power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
> resets = <&cpg 314>;
> - status = "disabled";
> };
>
> sdhi1: sd@...20000 {
> @@ -81,7 +80,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
> max-frequency = <195000000>;
> power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
> resets = <&cpg 313>;
> - status = "disabled";
> };
>
> sdhi2: sd@...40000 {
> @@ -95,7 +93,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
> max-frequency = <97500000>;
> power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
> resets = <&cpg 312>;
> - status = "disabled";
> };
>
> sdhi3: sd@...60000 {
> @@ -109,5 +106,4 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
> max-frequency = <97500000>;
> power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
> resets = <&cpg 311>;
> - status = "disabled";
> };
> diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
> index 1c88526dedfc..c5ba6a4ba1f2 100644
> --- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt
> +++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
> @@ -20,7 +20,6 @@ Required NFI properties:
> - interrupts: Interrupts of NFI.
> - clocks: NFI required clocks.
> - clock-names: NFI clocks internal name.
> -- status: Disabled default. Then set "okay" by platform.
> - ecc-engine: Required ECC Engine node.
> - #address-cells: NAND chip index, should be 1.
> - #size-cells: Should be 0.
> @@ -34,7 +33,6 @@ Example:
> clocks = <&pericfg CLK_PERI_NFI>,
> <&pericfg CLK_PERI_NFI_PAD>;
> clock-names = "nfi_clk", "pad_clk";
> - status = "disabled";
> ecc-engine = <&bch>;
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -152,7 +150,6 @@ Required BCH properties:
> - interrupts: Interrupts of ECC.
> - clocks: ECC required clocks.
> - clock-names: ECC clocks internal name.
> -- status: Disabled default. Then set "okay" by platform.
>
> Example:
>
> @@ -162,5 +159,4 @@ Example:
> interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
> clocks = <&pericfg CLK_PERI_NFI_ECC>;
> clock-names = "nfiecc_clk";
> - status = "disabled";
> };
> diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt
> index 6fd2decfa66c..92490330dc1c 100644
> --- a/Documentation/devicetree/bindings/pci/xgene-pci.txt
> +++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt
> @@ -25,8 +25,6 @@ Optional properties:
>
> Example:
>
> -SoC-specific DT Entry:
> -
> pcie0: pcie@...b0000 {
> status = "disabled";
> device_type = "pci";
> @@ -50,8 +48,3 @@ SoC-specific DT Entry:
> clocks = <&pcie0clk 0>;
> };
>
> -
> -Board-specific DT Entry:
> - &pcie0 {
> - status = "ok";
> - };
> diff --git a/Documentation/devicetree/bindings/pps/pps-gpio.txt b/Documentation/devicetree/bindings/pps/pps-gpio.txt
> index 0de23b793657..3683874832ae 100644
> --- a/Documentation/devicetree/bindings/pps/pps-gpio.txt
> +++ b/Documentation/devicetree/bindings/pps/pps-gpio.txt
> @@ -20,5 +20,4 @@ Example:
> assert-falling-edge;
>
> compatible = "pps-gpio";
> - status = "okay";
> };
> --
> 2.14.1
>
Powered by blists - more mailing lists