lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 2 May 2018 02:39:07 +0000
From:   "Qu, Jim" <Jim.Qu@....com>
To:     "Koenig, Christian" <Christian.Koenig@....com>,
        Mathieu Malaterre <malat@...ian.org>,
        "Deucher, Alexander" <Alexander.Deucher@....com>
CC:     David Airlie <airlied@...ux.ie>,
        "Zhou, David(ChunMing)" <David1.Zhou@....com>,
        dri-devel <dri-devel@...ts.freedesktop.org>,
        "amd-gfx@...ts.freedesktop.org" <amd-gfx@...ts.freedesktop.org>,
        LKML <linux-kernel@...r.kernel.org>
Subject: 答复: Tracking: radeon 0000:00:10.0: ring 0 stalled for more than 10240msec

Hi ,

If you are sure that the HW worked fine before. I think you should:

1. Be sure that HW works fine now.
2. recall the driver to the point at where it works well, and then replace them one by one to confirm component which causes the issue.
3. try to update the last VBIOS to adapt new driver.

Thanks
JimQu

________________________________________
发件人: amd-gfx <amd-gfx-bounces@...ts.freedesktop.org> 代表 Christian König <christian.koenig@....com>
发送时间: 2018年4月30日 1:16:14
收件人: Mathieu Malaterre; Deucher, Alexander
抄送: David Airlie; Zhou, David(ChunMing); dri-devel; amd-gfx@...ts.freedesktop.org; LKML
主题: Re: Tracking: radeon 0000:00:10.0: ring 0 stalled for more than 10240msec

Am 23.04.2018 um 20:50 schrieb Mathieu Malaterre:
> Hi there,
>
> I am pretty sure I was able to run kodi on an old Mac Mini G4 (big
> endian) with AMD RV280. Today it is failing to start with:

Well, that is rather old hardware. I suggest to make sure first that the
hw isn't broken in some way.

> How should I go and debug this (other than plain git-bisect) ?

You first need to figure out what's the failing component. Either Mesa,
DDX or the Kernel are possible candidates.

Another possibility is that you updated kodi and kodi is now doing
something the hw doesn't like.

Regards,
Christian.
_______________________________________________
amd-gfx mailing list
amd-gfx@...ts.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ