linux-kernel - [PATCH 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Fri,  4 May 2018 18:08:35 +0800
From:   Baolin Wang <baolin.wang@...aro.org>
To:     jacek.anaszewski@...il.com, pavel@....cz, robh+dt@...nel.org,
        mark.rutland@....com
Cc:     xiaotong.lu@...eadtrum.com, baolin.wang@...aro.org,
        broonie@...nel.org, linux-leds@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 1/2] dt-bindings: leds: Add SC27xx breathing light controller documentation

This patch adds the binding documentation for Spreadtrum SC27xx series
breathing light controller, which supports 3 outputs: red LED, green
LED and blue LED.

Signed-off-by: Baolin Wang <baolin.wang@...aro.org>
---
 .../devicetree/bindings/leds/leds-sc27xx-bltc.txt  |   39 ++++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt

diff --git a/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
new file mode 100644
index 0000000..d4e267d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
@@ -0,0 +1,39 @@
+LEDs connected to Spreadtrum SC27XX PMIC breathing light controller
+
+The SC27xx breathing light controller supports to 3 outputs:
+red LED, green LED and blue LED. Each LED can work at normal
+PWM mode or breath light mode.
+
+Required properties:
+- compatible: should be "sprd,sc27xx-bltc".
+- #address-cells: must be 1.
+- #size-cells: must be 0.
+- reg: specify controller address.
+
+LED sub-node properties:
+- reg: number of LED line (could be from 0 to 2).
+- label: (optional) name of LED.
+
+Examples:
+
+led-controller@200 {
+	compatible = "sprd,sc27xx-bltc";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x200>;
+
+	red@0 {
+		label = "red";
+		reg = <0x0>;
+	};
+
+	green@1 {
+		label = "green";
+		reg = <0x1>;
+	};
+
+	blue@2 {
+		label = "blue";
+		reg = <0x2>;
+	};
+};
-- 
1.7.9.5