| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 7 May 2018 06:48:55 +0000
From: Vadim Pasternak <vadimp@...lanox.com>
To: dvhart@...radead.org, andy.shevchenko@...il.com,
gregkh@...uxfoundation.org
Cc: linux-kernel@...r.kernel.org, platform-driver-x86@...r.kernel.org,
jiri@...nulli.us, michaelsh@...lanox.com, ivecera@...hat.com,
Vadim Pasternak <vadimp@...lanox.com>
Subject: [PATCH v2 7/7] platform/x86: mlx-platform: Add mlxreg-io platform driver activation
Add mlxreg-io platform driver activation. Access driver uses the same
regmap infrastructure as others Mellanox platform drivers.
Specific registers description for default platform data configuration are
added to mlx-platform. There are the registers for resets control, reset
causes monitoring, programmable devices version reading and mux select
control. This platform data is passed to mlxreg-io driver. Also some
default values for the register are set at initialization time through
the regmap infrastructure, which are necessary for moving write protection
from the general purpose registers, which are used by mlxreg-io for
write access.
Signed-off-by: Vadim Pasternak <vadimp@...lanox.com>
---
drivers/platform/x86/mlx-platform.c | 159 +++++++++++++++++++++++++++++++++++-
1 file changed, 157 insertions(+), 2 deletions(-)
diff --git a/drivers/platform/x86/mlx-platform.c b/drivers/platform/x86/mlx-platform.c
index a0fd9aa..87ddd3a 100644
--- a/drivers/platform/x86/mlx-platform.c
+++ b/drivers/platform/x86/mlx-platform.c
@@ -47,11 +47,18 @@
/* LPC bus IO offsets */
#define MLXPLAT_CPLD_LPC_I2C_BASE_ADRR 0x2000
#define MLXPLAT_CPLD_LPC_REG_BASE_ADRR 0x2500
+#define MLXPLAT_CPLD_LPC_REG_CPLD1_VER_OFFSET 0x00
+#define MLXPLAT_CPLD_LPC_REG_CPLD2_VER_OFFSET 0x01
+#define MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET 0x1d
#define MLXPLAT_CPLD_LPC_REG_LED1_OFFSET 0x20
#define MLXPLAT_CPLD_LPC_REG_LED2_OFFSET 0x21
#define MLXPLAT_CPLD_LPC_REG_LED3_OFFSET 0x22
#define MLXPLAT_CPLD_LPC_REG_LED4_OFFSET 0x23
#define MLXPLAT_CPLD_LPC_REG_LED5_OFFSET 0x24
+#define MLXPLAT_CPLD_LPC_REG_GP1_OFFSET 0x30
+#define MLXPLAT_CPLD_LPC_REG_WP1_OFFSET 0x31
+#define MLXPLAT_CPLD_LPC_REG_GP2_OFFSET 0x32
+#define MLXPLAT_CPLD_LPC_REG_WP2_OFFSET 0x33
#define MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET 0x3a
#define MLXPLAT_CPLD_LPC_REG_AGGR_MASK_OFFSET 0x3b
#define MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET 0x40
@@ -122,12 +129,14 @@
* @pdev_mux - array of mux platform devices
* @pdev_hotplug - hotplug platform devices
* @pdev_led - led platform devices
+ * @pdev_io_regs - register access platform devices
*/
struct mlxplat_priv {
struct platform_device *pdev_i2c;
struct platform_device *pdev_mux[MLXPLAT_CPLD_LPC_MUX_DEVS];
struct platform_device *pdev_hotplug;
struct platform_device *pdev_led;
+ struct platform_device *pdev_io_regs;
};
/* Regions for LPC I2C controller and LPC base register space */
@@ -813,6 +822,98 @@ static struct mlxreg_core_platform_data mlxplat_default_ng_led_data = {
.counter = ARRAY_SIZE(mlxplat_mlxcpld_default_ng_led_data),
};
+/* Platform register access default */
+static struct mlxreg_core_data mlxplat_mlxcpld_default_regs_io_data[] = {
+ {
+ .label = "cpld1_version",
+ .reg = MLXPLAT_CPLD_LPC_REG_CPLD1_VER_OFFSET,
+ .bit = GENMASK(7, 0),
+ .mode = 0444,
+ },
+ {
+ .label = "cpld2_version",
+ .reg = MLXPLAT_CPLD_LPC_REG_CPLD2_VER_OFFSET,
+ .bit = GENMASK(7, 0),
+ .mode = 0444,
+ },
+ {
+ .label = "cause_long_pb",
+ .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(0),
+ .mode = 0444,
+ },
+ {
+ .label = "cause_short_pb",
+ .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(1),
+ .mode = 0444,
+ },
+ {
+ .label = "cause_aux_pwr_or_ref",
+ .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(2),
+ .mode = 0444,
+ },
+ {
+ .label = "cause_main_pwr_fail",
+ .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(3),
+ .mode = 0444,
+ },
+ {
+ .label = "cause_sw_reset",
+ .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(4),
+ .mode = 0444,
+ },
+ {
+ .label = "cause_fw_reset",
+ .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(5),
+ .mode = 0444,
+ },
+ {
+ .label = "cause_hotswap_or_wd",
+ .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(6),
+ .mode = 0444,
+ },
+ {
+ .label = "cause_asic_thermal",
+ .reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(7),
+ .mode = 0444,
+ },
+ {
+ .label = "psu1_on",
+ .reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(0),
+ .mode = 0200,
+ },
+ {
+ .label = "psu2_on",
+ .reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(1),
+ .mode = 0200,
+ },
+ {
+ .label = "pwr_cycle",
+ .reg = MLXPLAT_CPLD_LPC_REG_GP1_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(2),
+ .mode = 0200,
+ },
+ {
+ .label = "select_iio",
+ .reg = MLXPLAT_CPLD_LPC_REG_GP2_OFFSET,
+ .mask = GENMASK(7, 0) & ~BIT(6),
+ .mode = 0644,
+ },
+};
+
+static struct mlxreg_core_platform_data mlxplat_default_regs_io_data = {
+ .data = mlxplat_mlxcpld_default_regs_io_data,
+ .counter = ARRAY_SIZE(mlxplat_mlxcpld_default_regs_io_data),
+};
static bool mlxplat_mlxcpld_writeable_reg(struct device *dev, unsigned int reg)
{
@@ -822,6 +923,10 @@ static bool mlxplat_mlxcpld_writeable_reg(struct device *dev, unsigned int reg)
case MLXPLAT_CPLD_LPC_REG_LED3_OFFSET:
case MLXPLAT_CPLD_LPC_REG_LED4_OFFSET:
case MLXPLAT_CPLD_LPC_REG_LED5_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_GP1_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_WP1_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_GP2_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_WP2_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGR_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRLO_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_PSU_EVENT_OFFSET:
@@ -838,11 +943,18 @@ static bool mlxplat_mlxcpld_writeable_reg(struct device *dev, unsigned int reg)
static bool mlxplat_mlxcpld_readable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
+ case MLXPLAT_CPLD_LPC_REG_CPLD1_VER_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_CPLD2_VER_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET:
case MLXPLAT_CPLD_LPC_REG_LED1_OFFSET:
case MLXPLAT_CPLD_LPC_REG_LED2_OFFSET:
case MLXPLAT_CPLD_LPC_REG_LED3_OFFSET:
case MLXPLAT_CPLD_LPC_REG_LED4_OFFSET:
case MLXPLAT_CPLD_LPC_REG_LED5_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_GP1_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_WP1_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_GP2_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_WP2_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGR_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET:
@@ -864,11 +976,16 @@ static bool mlxplat_mlxcpld_readable_reg(struct device *dev, unsigned int reg)
static bool mlxplat_mlxcpld_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
+ case MLXPLAT_CPLD_LPC_REG_CPLD1_VER_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_CPLD2_VER_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET:
case MLXPLAT_CPLD_LPC_REG_LED1_OFFSET:
case MLXPLAT_CPLD_LPC_REG_LED2_OFFSET:
case MLXPLAT_CPLD_LPC_REG_LED3_OFFSET:
case MLXPLAT_CPLD_LPC_REG_LED4_OFFSET:
case MLXPLAT_CPLD_LPC_REG_LED5_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_GP1_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_GP2_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGR_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET:
@@ -887,6 +1004,11 @@ static bool mlxplat_mlxcpld_volatile_reg(struct device *dev, unsigned int reg)
return false;
}
+static const struct reg_default mlxplat_mlxcpld_regmap_default[] = {
+ { MLXPLAT_CPLD_LPC_REG_WP1_OFFSET, 0x00 },
+ { MLXPLAT_CPLD_LPC_REG_WP2_OFFSET, 0x00 },
+};
+
struct mlxplat_mlxcpld_regmap_context {
void __iomem *base;
};
@@ -919,6 +1041,8 @@ static const struct regmap_config mlxplat_mlxcpld_regmap_config = {
.writeable_reg = mlxplat_mlxcpld_writeable_reg,
.readable_reg = mlxplat_mlxcpld_readable_reg,
.volatile_reg = mlxplat_mlxcpld_volatile_reg,
+ .reg_defaults = mlxplat_mlxcpld_regmap_default,
+ .num_reg_defaults = ARRAY_SIZE(mlxplat_mlxcpld_regmap_default),
.reg_read = mlxplat_mlxcpld_reg_read,
.reg_write = mlxplat_mlxcpld_reg_write,
};
@@ -930,6 +1054,7 @@ static struct resource mlxplat_mlxcpld_resources[] = {
static struct platform_device *mlxplat_dev;
static struct mlxreg_core_hotplug_platform_data *mlxplat_hotplug;
static struct mlxreg_core_platform_data *mlxplat_led;
+static struct mlxreg_core_platform_data *mlxplat_regs_io;
static int __init mlxplat_dmi_default_matched(const struct dmi_system_id *dmi)
{
@@ -944,6 +1069,7 @@ static int __init mlxplat_dmi_default_matched(const struct dmi_system_id *dmi)
mlxplat_hotplug->deferred_nr =
mlxplat_default_channels[i - 1][MLXPLAT_CPLD_GRP_CHNL_NUM - 1];
mlxplat_led = &mlxplat_default_led_data;
+ mlxplat_regs_io = &mlxplat_default_regs_io_data;
return 1;
};
@@ -978,6 +1104,7 @@ static int __init mlxplat_dmi_msn274x_matched(const struct dmi_system_id *dmi)
mlxplat_hotplug->deferred_nr =
mlxplat_msn21xx_channels[MLXPLAT_CPLD_GRP_CHNL_NUM - 1];
mlxplat_led = &mlxplat_default_led_data;
+ mlxplat_regs_io = &mlxplat_default_regs_io_data;
return 1;
};
@@ -1163,7 +1290,7 @@ static int mlxplat_mlxcpld_verify_bus_topology(int *nr)
static int __init mlxplat_init(void)
{
struct mlxplat_priv *priv;
- int i, nr, err;
+ int i, j, nr, err;
if (!dmi_check_system(mlxplat_dmi_table))
return -ENODEV;
@@ -1233,6 +1360,15 @@ static int __init mlxplat_init(void)
goto fail_platform_mux_register;
}
+ /* Set default registers. */
+ for (j = 0; j < mlxplat_mlxcpld_regmap_config.num_reg_defaults; j++) {
+ err = regmap_write(mlxplat_hotplug->regmap,
+ mlxplat_mlxcpld_regmap_default[j].reg,
+ mlxplat_mlxcpld_regmap_default[j].def);
+ if (err)
+ goto fail_platform_mux_register;
+ }
+
/* Add LED driver. */
mlxplat_led->regmap = mlxplat_hotplug->regmap;
priv->pdev_led = platform_device_register_resndata(
@@ -1244,14 +1380,31 @@ static int __init mlxplat_init(void)
goto fail_platform_hotplug_register;
}
+ /* Add registers io access driver. */
+ if (mlxplat_regs_io) {
+ mlxplat_regs_io->regmap = mlxplat_hotplug->regmap;
+ priv->pdev_io_regs = platform_device_register_resndata(
+ &mlxplat_dev->dev, "mlxreg-io",
+ PLATFORM_DEVID_NONE, NULL, 0,
+ mlxplat_regs_io,
+ sizeof(*mlxplat_regs_io));
+ if (IS_ERR(priv->pdev_io_regs)) {
+ err = PTR_ERR(priv->pdev_io_regs);
+ goto fail_platform_led_register;
+ }
+ }
+
/* Sync registers with hardware. */
regcache_mark_dirty(mlxplat_hotplug->regmap);
err = regcache_sync(mlxplat_hotplug->regmap);
if (err)
- goto fail_platform_led_register;
+ goto fail_platform_io_regs_register;
return 0;
+fail_platform_io_regs_register:
+ if (mlxplat_regs_io)
+ platform_device_unregister(priv->pdev_io_regs);
fail_platform_led_register:
platform_device_unregister(priv->pdev_led);
fail_platform_hotplug_register:
@@ -1272,6 +1425,8 @@ static void __exit mlxplat_exit(void)
struct mlxplat_priv *priv = platform_get_drvdata(mlxplat_dev);
int i;
+ if (priv->pdev_io_regs)
+ platform_device_unregister(priv->pdev_io_regs);
platform_device_unregister(priv->pdev_led);
platform_device_unregister(priv->pdev_hotplug);
--
2.1.4
Powered by blists - more mailing lists