lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Thu, 10 May 2018 14:27:51 +0200
From:   Marek Vasut <marek.vasut@...il.com>
To:     NeilBrown <neil@...wn.name>,
        Boris Brezillon <boris.brezillon@...tlin.com>
Cc:     David Woodhouse <dwmw2@...radead.org>,
        Brian Norris <computersforpeace@...il.com>,
        Richard Weinberger <richard@....at>,
        linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH/RFC] mtd: spi-nor: honour max_message_size for spi-nor
 writes.

On 05/10/2018 01:57 PM, NeilBrown wrote:
> On Thu, May 10 2018, Marek Vasut wrote:
> 
>> On 05/10/2018 12:28 AM, NeilBrown wrote:
>>> On Wed, May 09 2018, Boris Brezillon wrote:
>>>
>>>> On Fri, 27 Apr 2018 16:18:05 +1000
>>>> NeilBrown <neil@...wn.name> wrote:
>>>>
>>>>> Hi,
>>>>>  I've labeled this an RFC because I'm really not sure about removing the
>>>>>  error path from spi_nor_write() -- maybe that really matters.  But on
>>>>>  my hardware, performing multiple small spi writes to the flash seems
>>>>>  to work.
>>>>>
>>>>>  The spi driver is drivers/staging/mt7621-spi.  Possibly this needs to
>>>>>  use DMA instead of a FIFO (assuming the hardware can) - or maybe
>>>>>  drivers/spi/spi-mt65xx.c can be made to work on this hardware, though
>>>>>  that is for an ARM SOC and mt7621 is a MIPS SOC.
>>>>>
>>>>>  I note that openwrt has similar patches:
>>>>>   target/linux/generic/pending-4.14/450-mtd-spi-nor-allow-NOR-driver-to-write-fewer-bytes-th.patch
>>>>>
>>>>>  They also change the spi driver to do a short write, rather
>>>>>  than change m25p80 to request a short write.
>>>>>
>>>>>  Is there something horribly wrong with this?
>>>>
>>>> Marek, any opinion on this patch?
>>>>
>>>
>>> Hi,
>>>  thanks for following up.
>>>  I have since found that I don't need this patch, though maybe others
>>>  still do(??).
>>>  My hardware can only send 36 bytes and receive 32 in a single
>>>  transaction.  However I can run a sequence of transactions
>>>  to process a whole message no matter how large that message is.  As
>>>  long as I keep chip-select asserted, all the slave device sees is that
>>>  the clock period isn't quite constant, and the slave shouldn't care
>>>  much about that.
>>>  When reading from flash, I found that handling large messages with
>>>  multiple hardware transactions was 50% faster than breaking the
>>>  read down into lots of 32 byte messages.
>>>
>>>  So, I won't object if this patch is forgotten.  Thanks for
>>>  your time anyway.
>>
>> Nice, which hardware is that ?
> 
> Mediatek MT7621 SOC (particularly in the gnubee.org NAS platform).

On nice, a mips, good to see someone still cares about mips :)

-- 
Best regards,
Marek Vasut

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ