linux-kernel - [PATCH 2/4] clk: imx6sl: remove clks_init

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun,  3 Jun 2018 11:00:45 +0800
From:   Anson Huang <Anson.Huang@....com>
To:     shawnguo@...nel.org, kernel@...gutronix.de, fabio.estevam@....com,
        mturquette@...libre.com, sboyd@...nel.org
Cc:     Linux-imx@....com, linux-arm-kernel@...ts.infradead.org,
        linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 2/4] clk: imx6sl: remove clks_init_on array

Clock framework will enable those clocks registered
with CLK_IS_CRITICAL flag, so no need to have
clks_init_on array during clock initialization now.

Signed-off-by: Anson Huang <Anson.Huang@....com>
---
 drivers/clk/imx/clk-imx6sl.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/clk/imx/clk-imx6sl.c b/drivers/clk/imx/clk-imx6sl.c
index 66b1dd1..eb6bcbf 100644
--- a/drivers/clk/imx/clk-imx6sl.c
+++ b/drivers/clk/imx/clk-imx6sl.c
@@ -104,10 +104,6 @@ static struct clk_onecell_data clk_data;
 static void __iomem *ccm_base;
 static void __iomem *anatop_base;
 
-static const u32 clks_init_on[] __initconst = {
-	IMX6SL_CLK_IPG, IMX6SL_CLK_ARM, IMX6SL_CLK_MMDC_ROOT,
-};
-
 /*
  * ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken
  *           during WAIT mode entry process could cause cache memory
@@ -195,7 +191,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 {
 	struct device_node *np;
 	void __iomem *base;
-	int i;
 	int ret;
 
 	clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
@@ -426,13 +421,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 		pr_warn("%s: failed to set AHB clock rate %d!\n",
 			__func__, ret);
 
-	/*
-	 * Make sure those always on clocks are enabled to maintain the correct
-	 * usecount and enabling/disabling of parent PLLs.
-	 */
-	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
-		clk_prepare_enable(clks[clks_init_on[i]]);
-
 	if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
 		clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]);
 		clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]);
-- 
2.7.4