| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 20 Jun 2018 17:36:00 +0100
From: Will Deacon <will.deacon@....com>
To: linux-kernel@...r.kernel.org
Cc: mathieu.desnoyers@...icios.com, peterz@...radead.org,
paulmck@...ux.vnet.ibm.com, boqun.feng@...il.com,
Will Deacon <will.deacon@....com>
Subject: [RFC PATCH] rseq: Avoid infinite recursion when delivering SIGSEGV
When delivering a signal to a task that is using rseq, we call into
__rseq_handle_notify_resume() so that the registers pushed in the
sigframe are updated to reflect the state of the restartable sequence
(for example, ensuring that the signal returns to the abort handler if
necessary).
However, if the rseq management fails due to an unrecoverable fault when
accessing userspace or certain combinations of RSEQ_CS_* flags, then we
will attempt to deliver a SIGSEGV. This has the potential for infinite
recursion if the rseq code continuously fails on signal delivery.
Avoid this problem by using force_sigsegv() instead of force_sig(), which
is explicitly designed to reset the SEGV handler to SIG_DFL in the case
of a recursive fault.
Signed-off-by: Will Deacon <will.deacon@....com>
---
Sending as an RFC since I only spotted this via code inspection and haven't
tried to trigger it yet.
arch/arm/kernel/signal.c | 2 +-
arch/powerpc/kernel/signal.c | 2 +-
arch/x86/kernel/signal.c | 2 +-
include/linux/sched.h | 20 ++++++++++++++------
kernel/rseq.c | 7 ++++---
5 files changed, 21 insertions(+), 12 deletions(-)
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index f09e9d66d605..6434a62591e8 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -544,7 +544,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
* Increment event counter and perform fixup for the pre-signal
* frame.
*/
- rseq_signal_deliver(regs);
+ rseq_signal_deliver(ksig, regs);
/*
* Set up the stack frame
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index 17fe4339ba59..af822e764569 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -134,7 +134,7 @@ static void do_signal(struct task_struct *tsk)
/* Re-enable the breakpoints for the signal stack */
thread_change_pc(tsk, tsk->thread.regs);
- rseq_signal_deliver(tsk->thread.regs);
+ rseq_signal_deliver(&ksig, tsk->thread.regs);
if (is32) {
if (ksig.ka.sa.sa_flags & SA_SIGINFO)
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 445ca11ff863..92a3b312a53c 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -692,7 +692,7 @@ setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs)
* Increment event counter and perform fixup for the pre-signal
* frame.
*/
- rseq_signal_deliver(regs);
+ rseq_signal_deliver(ksig, regs);
/* Set up the stack frame */
if (is_ia32_frame(ksig)) {
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 87bf02d93a27..277f8ccb0661 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1799,20 +1799,27 @@ static inline void rseq_set_notify_resume(struct task_struct *t)
set_tsk_thread_flag(t, TIF_NOTIFY_RESUME);
}
-void __rseq_handle_notify_resume(struct pt_regs *regs);
+void __rseq_handle_notify_resume(struct ksignal *sig, struct pt_regs *regs);
-static inline void rseq_handle_notify_resume(struct pt_regs *regs)
+static inline void _rseq_handle_notify_resume(struct ksignal *ksig,
+ struct pt_regs *regs)
{
if (current->rseq)
- __rseq_handle_notify_resume(regs);
+ __rseq_handle_notify_resume(ksig, regs);
+}
+
+static inline void rseq_handle_notify_resume(struct pt_regs *regs)
+{
+ _rseq_handle_notify_resume(NULL, regs);
}
-static inline void rseq_signal_deliver(struct pt_regs *regs)
+static inline void rseq_signal_deliver(struct ksignal *ksig,
+ struct pt_regs *regs)
{
preempt_disable();
__set_bit(RSEQ_EVENT_SIGNAL_BIT, ¤t->rseq_event_mask);
preempt_enable();
- rseq_handle_notify_resume(regs);
+ _rseq_handle_notify_resume(ksig, regs);
}
/* rseq_preempt() requires preemption to be disabled. */
@@ -1867,7 +1874,8 @@ static inline void rseq_set_notify_resume(struct task_struct *t)
static inline void rseq_handle_notify_resume(struct pt_regs *regs)
{
}
-static inline void rseq_signal_deliver(struct pt_regs *regs)
+static inline void rseq_signal_deliver(struct ksignal *ksig,
+ struct pt_regs *regs)
{
}
static inline void rseq_preempt(struct task_struct *t)
diff --git a/kernel/rseq.c b/kernel/rseq.c
index ae306f90c514..22b6acf1ad63 100644
--- a/kernel/rseq.c
+++ b/kernel/rseq.c
@@ -251,10 +251,10 @@ static int rseq_ip_fixup(struct pt_regs *regs)
* respect to other threads scheduled on the same CPU, and with respect
* to signal handlers.
*/
-void __rseq_handle_notify_resume(struct pt_regs *regs)
+void __rseq_handle_notify_resume(struct ksignal *ksig, struct pt_regs *regs)
{
struct task_struct *t = current;
- int ret;
+ int ret, sig;
if (unlikely(t->flags & PF_EXITING))
return;
@@ -268,7 +268,8 @@ void __rseq_handle_notify_resume(struct pt_regs *regs)
return;
error:
- force_sig(SIGSEGV, t);
+ sig = ksig ? ksig->sig : 0;
+ force_sigsegv(sig, t);
}
#ifdef CONFIG_DEBUG_RSEQ
--
2.1.4
Powered by blists - more mailing lists