| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 21 Jun 2018 12:12:28 +0530
From: Naga Sureshkumar Relli <naga.sureshkumar.relli@...inx.com>
To: <boris.brezillon@...tlin.com>, <richard@....at>,
<dwmw2@...radead.org>, <computersforpeace@...il.com>,
<marek.vasut@...il.com>, <f.fainelli@...il.com>,
<mmayer@...adcom.com>, <rogerq@...com>, <ladis@...ux-mips.org>,
<ada@...rsis.com>, <honghui.zhang@...iatek.com>,
<miquel.raynal@...tlin.com>
CC: <linux-mtd@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
<nagasureshkumarrelli@...il.com>, <michals@...inx.com>,
Naga Sureshkumar Relli <naga.sureshkumar.relli@...inx.com>
Subject: [[LINUX PATCH v10] 1/4] Devicetree: Add pl353 smc controller devicetree binding information
Add pl353 static memory controller devicetree binding information.
Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@...inx.com>
---
Changes in v10:
- Corrected the typos like "should be" to "Must be" and nand to NAND etc..
- Removed padding to describe size-cells and address-cells
- Removed timing parameters from DT, and added ->setup_data_interface() hook
to the driver to read the SDR timings
- Modified label name from "pl353smcc_0: pl353smcc@...0e000" to
"smcc: memory-controller@...0e000" as suggested by Miquel
Changes in v9:
- Addressed below comments given by Randy Dunlap and Miquel Raynal
- Typos
- Added extra documentation that explains the HW ECC limitation with SMC
(Comments given to v8: https://lkml.org/lkml/2018/3/22/23)
Changes in v8:
- None
Changes in v7:
- Corrected clocks description
- prefixed '#' for address and size cells
Changes in v6:
- None
Changes in v5:
- Removed timing properties
Changes in v4:
- none
Changes in v3:
- none
Changes in v2:
- modified timing binding info as per onfi timing parameters
- add suffix nano second as timing unit
- modified the clock names as per the IP spec
---
.../bindings/memory-controllers/pl353-smc.txt | 41 ++++++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
diff --git a/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
new file mode 100644
index 0000000..8b4c65e
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/pl353-smc.txt
@@ -0,0 +1,41 @@
+Device tree bindings for ARM PL353 static memory controller
+
+PL353 static memory controller supports two kinds of memory
+interfaces.i.e NAND and SRAM/NOR interfaces.
+The actual devices are instantiated from the child nodes of pl353 smc node.
+
+Required properties:
+- compatible : Must be "arm,pl353-smc-r2p1"
+- reg : Controller registers map and length.
+- clock-names : List of input clock names - "ref_clk", "aper_clk"
+ (See clock bindings for details).
+- clocks : Clock phandles (see clock bindings for details).
+- address-cells : Must be 1.
+- size-cells : Must be 1.
+
+Child nodes:
+ For NAND the "arm,pl353-nand-r2p1" and for NOR the "cfi-flash" drivers are
+supported as child nodes.
+
+for NAND partition information please refer the below file
+Documentation/devicetree/bindings/mtd/partition.txt
+
+Example:
+ smcc: memory-controller@...0e000
+ compatible = "arm,pl353-smc-r2p1"
+ clock-names = "memclk", "aclk";
+ clocks = <&clkc 11>, <&clkc 44>;
+ reg = <0xe000e000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ nand_0: flash@...00000 {
+ compatible = "arm,pl353-nand-r2p1"
+ reg = <0xe1000000 0x1000000>;
+ (...)
+ };
+ nor0: flash@...00000 {
+ compatible = "cfi-flash";
+ reg = <0xe2000000 0x2000000>;
+ };
+ };
--
2.7.4
Powered by blists - more mailing lists