linux-kernel - [PATCH V5 1/5] dt-bindings: watchdog: add stm32mp1 support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 25 Jun 2018 17:42:59 +0200
From:   Ludovic Barre <ludovic.Barre@...com>
To:     Wim Van Sebroeck <wim@...ux-watchdog.org>,
        Guenter Roeck <linux@...ck-us.net>,
        Rob Herring <robh+dt@...nel.org>
CC:     Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre Torgue <alexandre.torgue@...com>,
        <linux-watchdog@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        Ludovic Barre <ludovic.barre@...com>
Subject: [PATCH V5 1/5] dt-bindings: watchdog: add stm32mp1 support

From: Ludovic Barre <ludovic.barre@...com>

This patch adds support of stm32mp1.
stm32mp1 requires 2 clocks lsi and pclk.

Signed-off-by: Ludovic Barre <ludovic.barre@...com>
---
 .../devicetree/bindings/watchdog/st,stm32-iwdg.txt          | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt
index cc13b10a..d8f4430 100644
--- a/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt
+++ b/Documentation/devicetree/bindings/watchdog/st,stm32-iwdg.txt
@@ -2,9 +2,15 @@ STM32 Independent WatchDoG (IWDG)
 ---------------------------------
 
 Required properties:
-- compatible: "st,stm32-iwdg"
-- reg: physical base address and length of the registers set for the device
-- clocks: must contain a single entry describing the clock input
+- compatible: Should be either:
+  - "st,stm32-iwdg"
+  - "st,stm32mp1-iwdg"
+- reg: Physical base address and length of the registers set for the device
+- clocks: Reference to the clock entry lsi. Additional pclk clock entry
+  is required only for st,stm32mp1-iwdg.
+- clock-names: Name of the clocks used.
+  "lsi" for st,stm32-iwdg
+  "lsi", "pclk" for st,stm32mp1-iwdg
 
 Optional Properties:
 - timeout-sec: Watchdog timeout value in seconds.
@@ -15,5 +21,6 @@ iwdg: watchdog@...03000 {
 	compatible = "st,stm32-iwdg";
 	reg = <0x40003000 0x400>;
 	clocks = <&clk_lsi>;
+	clock-names = "lsi";
 	timeout-sec = <32>;
 };
-- 
2.7.4