| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 29 Jun 2018 19:10:07 +0100
From: John Whitmore <johnfwhitmore@...il.com>
To: devel@...verdev.osuosl.org
Cc: linux-kernel@...r.kernel.org, tglx@...utronix.de,
pombredanne@...b.com, kstewart@...uxfoundation.org,
gregkh@...uxfoundation.org, John Whitmore <johnfwhitmore@...il.com>
Subject: [PATCH 3/3] staging: rtl8192u: Prune the rtl819x_HT.h file of unused definitions.
There are two files named "rtl819x_HT.h"
$ find . -name rtl819x_HT.h -print
./drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
./drivers/staging/rtl8192e/rtl819x_HT.h
The two files are very similar but differ slightly. Unsed definitions have
been removed from "drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h" as a first
step towards possibly merging the two files into one.
Signed-off-by: John Whitmore <johnfwhitmore@...il.com>
---
.../staging/rtl8192u/ieee80211/rtl819x_HT.h | 190 +++++++++---------
1 file changed, 93 insertions(+), 97 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
index a85036022aa8..30a00c73dd06 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
@@ -10,17 +10,17 @@
//
// Operation mode value
//
-#define HT_OPMODE_NO_PROTECT 0
-#define HT_OPMODE_OPTIONAL 1
-#define HT_OPMODE_40MHZ_PROTECT 2
-#define HT_OPMODE_MIXED 3
+//#define HT_OPMODE_NO_PROTECT 0
+//#define HT_OPMODE_OPTIONAL 1
+//#define HT_OPMODE_40MHZ_PROTECT 2
+//#define HT_OPMODE_MIXED 3
//
// MIMO Power Save Settings
//
#define MIMO_PS_STATIC 0
-#define MIMO_PS_DYNAMIC 1
-#define MIMO_PS_NOLIMIT 3
+//#define MIMO_PS_DYNAMIC 1
+//#define MIMO_PS_NOLIMIT 3
//
@@ -35,26 +35,25 @@
#define HT_SUPPORTED_MCS_2SS_BITMAP 0x0000ff00
#define HT_SUPPORTED_MCS_1SS_2SS_BITMAP HT_MCS_1SS_BITMAP|HT_MCS_1SS_2SS_BITMAP
-
-typedef enum _HT_MCS_RATE {
- HT_MCS0 = 0x00000001,
- HT_MCS1 = 0x00000002,
- HT_MCS2 = 0x00000004,
- HT_MCS3 = 0x00000008,
- HT_MCS4 = 0x00000010,
- HT_MCS5 = 0x00000020,
- HT_MCS6 = 0x00000040,
- HT_MCS7 = 0x00000080,
- HT_MCS8 = 0x00000100,
- HT_MCS9 = 0x00000200,
- HT_MCS10 = 0x00000400,
- HT_MCS11 = 0x00000800,
- HT_MCS12 = 0x00001000,
- HT_MCS13 = 0x00002000,
- HT_MCS14 = 0x00004000,
- HT_MCS15 = 0x00008000,
- // Do not define MCS32 here although 8190 support MCS32
-} HT_MCS_RATE, *PHT_MCS_RATE;
+//typedef enum _HT_MCS_RATE {
+// HT_MCS0 = 0x00000001,
+// HT_MCS1 = 0x00000002,
+// HT_MCS2 = 0x00000004,
+// HT_MCS3 = 0x00000008,
+// HT_MCS4 = 0x00000010,
+// HT_MCS5 = 0x00000020,
+// HT_MCS6 = 0x00000040,
+// HT_MCS7 = 0x00000080,
+// HT_MCS8 = 0x00000100,
+// HT_MCS9 = 0x00000200,
+// HT_MCS10 = 0x00000400,
+// HT_MCS11 = 0x00000800,
+// HT_MCS12 = 0x00001000,
+// HT_MCS13 = 0x00002000,
+// HT_MCS14 = 0x00004000,
+// HT_MCS15 = 0x00008000,
+// // Do not define MCS32 here although 8190 support MCS32
+//} HT_MCS_RATE, *PHT_MCS_RATE;
//
// Represent Channel Width in HT Capabilities
@@ -120,27 +119,26 @@ typedef union _HT_CAPABILITY_MACPARA{
}HT_CAPABILITY_MACPARA, *PHT_CAPABILITY_MACPARA;
*/
-typedef enum _HT_ACTION {
- ACT_RECOMMAND_WIDTH = 0,
- ACT_MIMO_PWR_SAVE = 1,
- ACT_PSMP = 2,
- ACT_SET_PCO_PHASE = 3,
- ACT_MIMO_CHL_MEASURE = 4,
- ACT_RECIPROCITY_CORRECT = 5,
- ACT_MIMO_CSI_MATRICS = 6,
- ACT_MIMO_NOCOMPR_STEER = 7,
- ACT_MIMO_COMPR_STEER = 8,
- ACT_ANTENNA_SELECT = 9,
-} HT_ACTION, *PHT_ACTION;
-
+//typedef enum _HT_ACTION {
+// ACT_RECOMMAND_WIDTH = 0,
+// ACT_MIMO_PWR_SAVE = 1,
+// ACT_PSMP = 2,
+// ACT_SET_PCO_PHASE = 3,
+// ACT_MIMO_CHL_MEASURE = 4,
+// ACT_RECIPROCITY_CORRECT = 5,
+// ACT_MIMO_CSI_MATRICS = 6,
+// ACT_MIMO_NOCOMPR_STEER = 7,
+// ACT_MIMO_COMPR_STEER = 8,
+// ACT_ANTENNA_SELECT = 9,
+//} HT_ACTION, *PHT_ACTION;
/* 2007/06/07 MH Define sub-carrier mode for 40MHZ. */
-typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier {
- SC_MODE_DUPLICATE = 0,
- SC_MODE_LOWER = 1,
- SC_MODE_UPPER = 2,
- SC_MODE_FULL40MHZ = 3,
-}HT_BW40_SC_E;
+//typedef enum _HT_Bandwidth_40MHZ_Sub_Carrier {
+// SC_MODE_DUPLICATE = 0,
+// SC_MODE_LOWER = 1,
+// SC_MODE_UPPER = 2,
+// SC_MODE_FULL40MHZ = 3,
+//}HT_BW40_SC_E;
typedef struct _HT_CAPABILITY_ELE {
@@ -216,11 +214,11 @@ typedef struct _HT_INFORMATION_ELE {
// MIMO Power Save control field.
// This is appear in MIMO Power Save Action Frame
//
-typedef struct _MIMOPS_CTRL {
- u8 MimoPsEnable:1;
- u8 MimoPsMode:1;
- u8 Reserved:6;
-} MIMOPS_CTRL, *PMIMOPS_CTRL;
+//typedef struct _MIMOPS_CTRL {
+// u8 MimoPsEnable:1;
+// u8 MimoPsMode:1;
+// u8 Reserved:6;
+//} MIMOPS_CTRL, *PMIMOPS_CTRL;
typedef enum _HT_SPEC_VER {
HT_SPEC_VER_IEEE = 0,
@@ -348,26 +346,26 @@ typedef struct _RT_HIGH_THROUGHPUT {
// when card is configured as "AP mode"
//------------------------------------------------------------
-typedef struct _RT_HTINFO_STA_ENTRY {
- u8 bEnableHT;
-
- u8 bSupportCck;
-
- u16 AMSDU_MaxSize;
-
- u8 AMPDU_Factor;
- u8 MPDU_Density;
-
- u8 HTHighestOperaRate;
-
- u8 bBw40MHz;
-
- u8 MimoPs;
-
- u8 McsRateSet[16];
-
-
-}RT_HTINFO_STA_ENTRY, *PRT_HTINFO_STA_ENTRY;
+//typedef struct _RT_HTINFO_STA_ENTRY {
+// u8 bEnableHT;
+//
+// u8 bSupportCck;
+//
+// u16 AMSDU_MaxSize;
+//
+// u8 AMPDU_Factor;
+// u8 MPDU_Density;
+//
+// u8 HTHighestOperaRate;
+//
+// u8 bBw40MHz;
+//
+// u8 MimoPs;
+//
+// u8 McsRateSet[16];
+//
+//
+//}RT_HTINFO_STA_ENTRY, *PRT_HTINFO_STA_ENTRY;
@@ -396,26 +394,26 @@ typedef struct _BSS_HT {
u8 bdRT2RTLongSlotTime;
} __attribute__ ((packed)) BSS_HT, *PBSS_HT;
-typedef struct _MIMO_RSSI {
- u32 EnableAntenna;
- u32 AntennaA;
- u32 AntennaB;
- u32 AntennaC;
- u32 AntennaD;
- u32 Average;
-}MIMO_RSSI, *PMIMO_RSSI;
+//typedef struct _MIMO_RSSI {
+// u32 EnableAntenna;
+// u32 AntennaA;
+// u32 AntennaB;
+// u32 AntennaC;
+// u32 AntennaD;
+// u32 Average;
+//}MIMO_RSSI, *PMIMO_RSSI;
-typedef struct _MIMO_EVM {
- u32 EVM1;
- u32 EVM2;
-}MIMO_EVM, *PMIMO_EVM;
+//typedef struct _MIMO_EVM {
+// u32 EVM1;
+// u32 EVM2;
+//}MIMO_EVM, *PMIMO_EVM;
-typedef struct _FALSE_ALARM_STATISTICS {
- u32 Cnt_Parity_Fail;
- u32 Cnt_Rate_Illegal;
- u32 Cnt_Crc8_fail;
- u32 Cnt_all;
-}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS;
+//typedef struct _FALSE_ALARM_STATISTICS {
+// u32 Cnt_Parity_Fail;
+// u32 Cnt_Rate_Illegal;
+// u32 Cnt_Crc8_fail;
+// u32 Cnt_all;
+//}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS;
extern u8 MCS_FILTER_ALL[16];
@@ -424,16 +422,14 @@ extern u8 MCS_FILTER_1SS[16];
/* 2007/07/11 MH Modify the macro. Becaus STA may link with a N-AP. If we set
STA in A/B/G mode and AP is still in N mode. The macro will be wrong. We have
to add a macro to judge wireless mode. */
-#define PICK_RATE(_nLegacyRate, _nMcsRate) \
- (_nMcsRate==0)?(_nLegacyRate&0x7f):(_nMcsRate)
+#define PICK_RATE(_nLegacyRate, _nMcsRate) \
+ (_nMcsRate==0)?(_nLegacyRate&0x7f):(_nMcsRate)
/* 2007/07/12 MH We only define legacy and HT wireless mode now. */
#define LEGACY_WIRELESS_MODE IEEE_MODE_MASK
-
-#define CURRENT_RATE(WirelessMode, LegacyRate, HTRate) \
- ((WirelessMode & (LEGACY_WIRELESS_MODE))!=0)?\
- (LegacyRate):\
- (PICK_RATE(LegacyRate, HTRate))
-
+#define CURRENT_RATE(WirelessMode, LegacyRate, HTRate) \
+ ((WirelessMode & (LEGACY_WIRELESS_MODE))!=0)? \
+ (LegacyRate): \
+ (PICK_RATE(LegacyRate, HTRate))
// MCS Bw 40 {1~7, 12~15,32}
@@ -441,7 +437,7 @@ extern u8 MCS_FILTER_1SS[16];
#define RATE_ADPT_2SS_MASK 0xF0 //Skip MCS8~11 because mcs7 > mcs6, 9, 10, 11. 2007.01.16 by Emily
#define RATE_ADPT_MCS32_MASK 0x01
-#define IS_11N_MCS_RATE(rate) (rate&0x80)
+//#define IS_11N_MCS_RATE(rate) (rate&0x80)
typedef enum _HT_AGGRE_SIZE {
HT_AGG_SIZE_8K = 0,
--
2.17.1
Powered by blists - more mailing lists