lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 29 Jun 2018 15:09:34 -0500
From:   David Lechner <david@...hnology.com>
To:     Bartosz Golaszewski <brgl@...ev.pl>, Sekhar Nori <nsekhar@...com>,
        Kevin Hilman <khilman@...nel.org>,
        Russell King <linux@...linux.org.uk>,
        Grygorii Strashko <grygorii.strashko@...com>,
        "David S . Miller" <davem@...emloft.net>,
        Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
        Lukas Wunner <lukas@...ner.de>, Rob Herring <robh@...nel.org>,
        Florian Fainelli <f.fainelli@...il.com>,
        Dan Carpenter <dan.carpenter@...cle.com>,
        Ivan Khoronzhuk <ivan.khoronzhuk@...aro.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Andrew Lunn <andrew@...n.ch>, Jonathan Corbet <corbet@....net>
Cc:     linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-omap@...r.kernel.org, netdev@...r.kernel.org,
        Bartosz Golaszewski <bgolaszewski@...libre.com>
Subject: Re: [PATCH v4 08/18] net: davinci_emac: potentially get the MAC
 address from MTD

On 06/29/2018 04:40 AM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@...libre.com>
> 
> On da850-evm board we can read the MAC address from MTD. It's currently
> done in the relevant board file, but we want to get rid of all the MAC
> reading callbacks from the board file (SPI and NAND). Move the reading
> of the MAC address from SPI to the emac driver's probe function.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@...libre.com>
> ---
>   drivers/net/ethernet/ti/davinci_emac.c | 20 ++++++++++++++++++--
>   1 file changed, 18 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
> index a1a6445b5a7e..48e6a7755811 100644
> --- a/drivers/net/ethernet/ti/davinci_emac.c
> +++ b/drivers/net/ethernet/ti/davinci_emac.c
> @@ -67,7 +67,7 @@
>   #include <linux/of_irq.h>
>   #include <linux/of_net.h>
>   #include <linux/mfd/syscon.h>
> -
> +#include <linux/mtd/mtd.h>
>   #include <asm/irq.h>
>   #include <asm/page.h>
>   
> @@ -1783,7 +1783,10 @@ static int davinci_emac_probe(struct platform_device *pdev)
>   	struct cpdma_params dma_params;
>   	struct clk *emac_clk;
>   	unsigned long emac_bus_frequency;
> -
> +#ifdef CONFIG_MTD
> +	size_t mac_addr_len;
> +	struct mtd_info *mtd;
> +#endif /* CONFIG_MTD */
>   
>   	/* obtain emac clock from kernel */
>   	emac_clk = devm_clk_get(&pdev->dev, NULL);
> @@ -1815,6 +1818,19 @@ static int davinci_emac_probe(struct platform_device *pdev)
>   		goto err_free_netdev;
>   	}
>   
> +#ifdef CONFIG_MTD

What about the case when MTD is compiled as a module?

> +	mtd = get_mtd_device_nm("MAC-Address");

What about the case when PTR_ERR(mtd) == -EPROBE_DEFER?

> +	if (!IS_ERR(mtd)) {
> +		rc = mtd_read(mtd, 0, ETH_ALEN,
> +			      &mac_addr_len, priv->mac_addr);
> +		if (rc == 0)
> +			dev_info(&pdev->dev,
> +				 "Read MAC addr from SPI Flash: %pM\n",
> +				 priv->mac_addr);
> +		put_mtd_device(mtd);
> +	}
> +#endif /* CONFIG_MTD */
> +
>   	/* MAC addr and PHY mask , RMII enable info from platform_data */
>   	memcpy(priv->mac_addr, pdata->mac_addr, ETH_ALEN);
>   	priv->phy_id = pdata->phy_id;
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ