| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 4 Jul 2018 11:39:00 +1000
From: Greg Ungerer <gerg@...ux-m68k.org>
To: Mike Rapoport <rppt@...ux.vnet.ibm.com>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Sam Creasey <sammy@...my.net>
Cc: Michal Hocko <mhocko@...nel.org>, linux-m68k@...ts.linux-m68k.org,
linux-mm@...ck.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/3] m68k: switch to MEMBLOCK + NO_BOOTMEM
Hi Mike,
On 03/07/18 20:29, Mike Rapoport wrote:
> In m68k the physical memory is described by [memory_start, memory_end] for
> !MMU variant and by m68k_memory array of memory ranges for the MMU version.
> This information is directly used to register the physical memory with
> memblock.
>
> The reserve_bootmem() calls are replaced with memblock_reserve() and the
> bootmap bitmap allocation is simply dropped.
>
> Since the MMU variant creates early mappings only for the small part of the
> memory we force bottom-up allocations in memblock because otherwise we will
> attempt to access memory that not yet mapped
>
> Signed-off-by: Mike Rapoport <rppt@...ux.vnet.ibm.com>
This builds cleanly for me with a m5475_defconfig, but it fails
to boot on real hardware. No console, no nothing on startup.
I haven't debugged any further yet.
The M5475 is a ColdFire with MMU enabled target.
Regards
Greg
> ---
> arch/m68k/Kconfig | 3 +++
> arch/m68k/kernel/setup_mm.c | 14 ++++----------
> arch/m68k/kernel/setup_no.c | 20 ++++----------------
> arch/m68k/mm/init.c | 1 -
> arch/m68k/mm/mcfmmu.c | 11 +++++++----
> arch/m68k/mm/motorola.c | 35 +++++++++++------------------------
> arch/m68k/sun3/config.c | 4 ----
> 7 files changed, 29 insertions(+), 59 deletions(-)
>
> diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
> index 785612b..bd7f38a 100644
> --- a/arch/m68k/Kconfig
> +++ b/arch/m68k/Kconfig
> @@ -24,6 +24,9 @@ config M68K
> select MODULES_USE_ELF_RELA
> select OLD_SIGSUSPEND3
> select OLD_SIGACTION
> + select HAVE_MEMBLOCK
> + select ARCH_DISCARD_MEMBLOCK
> + select NO_BOOTMEM
>
> config CPU_BIG_ENDIAN
> def_bool y
> diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
> index f35e3eb..6512955 100644
> --- a/arch/m68k/kernel/setup_mm.c
> +++ b/arch/m68k/kernel/setup_mm.c
> @@ -21,6 +21,7 @@
> #include <linux/string.h>
> #include <linux/init.h>
> #include <linux/bootmem.h>
> +#include <linux/memblock.h>
> #include <linux/proc_fs.h>
> #include <linux/seq_file.h>
> #include <linux/module.h>
> @@ -165,6 +166,8 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record)
> be32_to_cpu(m->addr);
> m68k_memory[m68k_num_memory].size =
> be32_to_cpu(m->size);
> + memblock_add(m68k_memory[m68k_num_memory].addr,
> + m68k_memory[m68k_num_memory].size);
> m68k_num_memory++;
> } else
> pr_warn("%s: too many memory chunks\n",
> @@ -224,10 +227,6 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record)
>
> void __init setup_arch(char **cmdline_p)
> {
> -#ifndef CONFIG_SUN3
> - int i;
> -#endif
> -
> /* The bootinfo is located right after the kernel */
> if (!CPU_IS_COLDFIRE)
> m68k_parse_bootinfo((const struct bi_record *)_end);
> @@ -356,14 +355,9 @@ void __init setup_arch(char **cmdline_p)
> #endif
>
> #ifndef CONFIG_SUN3
> - for (i = 1; i < m68k_num_memory; i++)
> - free_bootmem_node(NODE_DATA(i), m68k_memory[i].addr,
> - m68k_memory[i].size);
> #ifdef CONFIG_BLK_DEV_INITRD
> if (m68k_ramdisk.size) {
> - reserve_bootmem_node(__virt_to_node(phys_to_virt(m68k_ramdisk.addr)),
> - m68k_ramdisk.addr, m68k_ramdisk.size,
> - BOOTMEM_DEFAULT);
> + memblock_reserve(m68k_ramdisk.addr, m68k_ramdisk.size);
> initrd_start = (unsigned long)phys_to_virt(m68k_ramdisk.addr);
> initrd_end = initrd_start + m68k_ramdisk.size;
> pr_info("initrd: %08lx - %08lx\n", initrd_start, initrd_end);
> diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
> index a98af10..3e8d87a 100644
> --- a/arch/m68k/kernel/setup_no.c
> +++ b/arch/m68k/kernel/setup_no.c
> @@ -28,6 +28,7 @@
> #include <linux/errno.h>
> #include <linux/string.h>
> #include <linux/bootmem.h>
> +#include <linux/memblock.h>
> #include <linux/seq_file.h>
> #include <linux/init.h>
> #include <linux/initrd.h>
> @@ -86,8 +87,6 @@ void (*mach_power_off)(void);
>
> void __init setup_arch(char **cmdline_p)
> {
> - int bootmap_size;
> -
> memory_start = PAGE_ALIGN(_ramstart);
> memory_end = _ramend;
>
> @@ -142,6 +141,8 @@ void __init setup_arch(char **cmdline_p)
> pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ",
> __bss_stop, memory_start, memory_start, memory_end);
>
> + memblock_add(memory_start, memory_end - memory_start);
> +
> /* Keep a copy of command line */
> *cmdline_p = &command_line[0];
> memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
> @@ -158,23 +159,10 @@ void __init setup_arch(char **cmdline_p)
> min_low_pfn = PFN_DOWN(memory_start);
> max_pfn = max_low_pfn = PFN_DOWN(memory_end);
>
> - bootmap_size = init_bootmem_node(
> - NODE_DATA(0),
> - min_low_pfn, /* map goes here */
> - PFN_DOWN(PAGE_OFFSET),
> - max_pfn);
> - /*
> - * Free the usable memory, we have to make sure we do not free
> - * the bootmem bitmap so we then reserve it after freeing it :-)
> - */
> - free_bootmem(memory_start, memory_end - memory_start);
> - reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
> -
> #if defined(CONFIG_UBOOT) && defined(CONFIG_BLK_DEV_INITRD)
> if ((initrd_start > 0) && (initrd_start < initrd_end) &&
> (initrd_end < memory_end))
> - reserve_bootmem(initrd_start, initrd_end - initrd_start,
> - BOOTMEM_DEFAULT);
> + memblock_reserve(initrd_start, initrd_end - initrd_start);
> #endif /* if defined(CONFIG_BLK_DEV_INITRD) */
>
> /*
> diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c
> index 8827b7f..38e2b27 100644
> --- a/arch/m68k/mm/init.c
> +++ b/arch/m68k/mm/init.c
> @@ -71,7 +71,6 @@ void __init m68k_setup_node(int node)
> pg_data_table[i] = pg_data_map + node;
> }
> #endif
> - pg_data_map[node].bdata = bootmem_node_data + node;
> node_set_online(node);
> }
>
> diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c
> index 2925d79..e9e60e1 100644
> --- a/arch/m68k/mm/mcfmmu.c
> +++ b/arch/m68k/mm/mcfmmu.c
> @@ -14,6 +14,7 @@
> #include <linux/init.h>
> #include <linux/string.h>
> #include <linux/bootmem.h>
> +#include <linux/memblock.h>
>
> #include <asm/setup.h>
> #include <asm/page.h>
> @@ -160,6 +161,8 @@ void __init cf_bootmem_alloc(void)
> m68k_memory[0].addr = _rambase;
> m68k_memory[0].size = _ramend - _rambase;
>
> + memblock_add(m68k_memory[0].addr, m68k_memory[0].size);
> +
> /* compute total pages in system */
> num_pages = PFN_DOWN(_ramend - _rambase);
>
> @@ -170,14 +173,14 @@ void __init cf_bootmem_alloc(void)
> max_pfn = max_low_pfn = PFN_DOWN(_ramend);
> high_memory = (void *)_ramend;
>
> + /* Reserve kernel text/data/bss */
> + memblock_reserve(memstart, _ramend - memstart);
> +
> m68k_virt_to_node_shift = fls(_ramend - 1) - 6;
> module_fixup(NULL, __start_fixup, __stop_fixup);
>
> - /* setup bootmem data */
> + /* setup node data */
> m68k_setup_node(0);
> - memstart += init_bootmem_node(NODE_DATA(0), start_pfn,
> - min_low_pfn, max_low_pfn);
> - free_bootmem_node(NODE_DATA(0), memstart, _ramend - memstart);
> }
>
> /*
> diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
> index e490ecc..4e17ecb 100644
> --- a/arch/m68k/mm/motorola.c
> +++ b/arch/m68k/mm/motorola.c
> @@ -19,6 +19,7 @@
> #include <linux/types.h>
> #include <linux/init.h>
> #include <linux/bootmem.h>
> +#include <linux/memblock.h>
> #include <linux/gfp.h>
>
> #include <asm/setup.h>
> @@ -208,7 +209,7 @@ void __init paging_init(void)
> {
> unsigned long zones_size[MAX_NR_ZONES] = { 0, };
> unsigned long min_addr, max_addr;
> - unsigned long addr, size, end;
> + unsigned long addr;
> int i;
>
> #ifdef DEBUG
> @@ -253,34 +254,20 @@ void __init paging_init(void)
> min_low_pfn = availmem >> PAGE_SHIFT;
> max_pfn = max_low_pfn = max_addr >> PAGE_SHIFT;
>
> - for (i = 0; i < m68k_num_memory; i++) {
> - addr = m68k_memory[i].addr;
> - end = addr + m68k_memory[i].size;
> - m68k_setup_node(i);
> - availmem = PAGE_ALIGN(availmem);
> - availmem += init_bootmem_node(NODE_DATA(i),
> - availmem >> PAGE_SHIFT,
> - addr >> PAGE_SHIFT,
> - end >> PAGE_SHIFT);
> - }
> + /* Reserve kernel text/data/bss and the memory allocated in head.S */
> + memblock_reserve(m68k_memory[0].addr, availmem - m68k_memory[0].addr);
>
> /*
> * Map the physical memory available into the kernel virtual
> - * address space. First initialize the bootmem allocator with
> - * the memory we already mapped, so map_node() has something
> - * to allocate.
> + * address space. Make sure memblock will not try to allocate
> + * pages beyond the memory we already mapped in head.S
> */
> - addr = m68k_memory[0].addr;
> - size = m68k_memory[0].size;
> - free_bootmem_node(NODE_DATA(0), availmem,
> - min(m68k_init_mapped_size, size) - (availmem - addr));
> - map_node(0);
> - if (size > m68k_init_mapped_size)
> - free_bootmem_node(NODE_DATA(0), addr + m68k_init_mapped_size,
> - size - m68k_init_mapped_size);
> -
> - for (i = 1; i < m68k_num_memory; i++)
> + memblock_set_bottom_up(true);
> +
> + for (i = 0; i < m68k_num_memory; i++) {
> + m68k_setup_node(i);
> map_node(i);
> + }
>
> flush_tlb_all();
>
> diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
> index 1d28d38..79a2bb8 100644
> --- a/arch/m68k/sun3/config.c
> +++ b/arch/m68k/sun3/config.c
> @@ -123,10 +123,6 @@ static void __init sun3_bootmem_alloc(unsigned long memory_start,
> availmem = memory_start;
>
> m68k_setup_node(0);
> - availmem += init_bootmem(start_page, num_pages);
> - availmem = (availmem + (PAGE_SIZE-1)) & PAGE_MASK;
> -
> - free_bootmem(__pa(availmem), memory_end - (availmem));
> }
>
>
>
Powered by blists - more mailing lists