lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Thu, 12 Jul 2018 14:09:06 +0530 From: Amit Kucheria <amit.kucheria@...aro.org> To: linux-kernel@...r.kernel.org Cc: rnayak@...eaurora.org, linux-arm-msm@...r.kernel.org, bjorn.andersson@...aro.org, edubezval@...il.com, smohanad@...eaurora.org, vivek.gautam@...eaurora.org, andy.gross@...aro.org, dianders@...omium.org, mka@...omium.org, Zhang Rui <rui.zhang@...el.com>, Rob Herring <robh+dt@...nel.org>, Mark Rutland <mark.rutland@....com>, linux-pm@...r.kernel.org, devicetree@...r.kernel.org Subject: [PATCH v7 5/7] dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP We want to create common code for v2 of the TSENS IP block that is used in a large number of Qualcomm SoCs. "qcom,tsens-v2" should be able to handle most of the common functionality start with a common get_temp() function. It is also necessary to split out the memory regions for the TM and SROT register banks because their offsets are not constant across SoC families. Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org> Reviewed-by: Rob Herring <robh@...nel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org> Tested-by: Matthias Kaehlcke <mka@...omium.org> --- .../devicetree/bindings/thermal/qcom-tsens.txt | 31 +++++++++++++++++----- 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt index 06195e8..b5312a8 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt @@ -1,18 +1,28 @@ * QCOM SoC Temperature Sensor (TSENS) Required properties: -- compatible : - - "qcom,msm8916-tsens" : For 8916 Family of SoCs - - "qcom,msm8974-tsens" : For 8974 Family of SoCs - - "qcom,msm8996-tsens" : For 8996 Family of SoCs +- compatible: + Must be one of the following: + - "qcom,msm8916-tsens" (MSM8916) + - "qcom,msm8974-tsens" (MSM8974) + - "qcom,msm8996-tsens" (MSM8996) + - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998) + - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845) + The generic "qcom,tsens-v2" property must be used as a fallback for any SoC + with version 2 of the TSENS IP. MSM8996 is the only exception beacause the + generic property did not exist when support was added. + +- reg: Address range of the thermal registers. + New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM + register spaces separately, with order being TM before SROT. + See Example 2, below. -- reg: Address range of the thermal registers - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. - #qcom,sensors: Number of sensors in tsens block - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify nvmem cells -Example: +Example 1 (legacy support before a fallback tsens-v2 propoerty was introduced): tsens: thermal-sensor@...000 { compatible = "qcom,msm8916-tsens"; reg = <0x4a8000 0x2000>; @@ -20,3 +30,12 @@ tsens: thermal-sensor@...000 { nvmem-cell-names = "caldata", "calsel"; #thermal-sensor-cells = <1>; }; + +Example 2 (for any platform containing v2 of the TSENS IP): +tsens0: thermal-sensor@...3000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc263000 0x1ff>, /* TM */ + <0xc222000 0x1ff>; /* SROT */ + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; + }; -- 2.7.4
Powered by blists - more mailing lists