linux-kernel - Re: [PATCH 00/31] Introduced new Cadence USBSSP DRD Driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 2 Aug 2018 16:24:24 +0300
From:   Roger Quadros <rogerq@...com>
To:     Pawel Laszczak <pawell@...ence.com>
CC:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        "linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
        Felipe Balbi <balbi@...nel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Lukasz Tyrala <ltyrala@...ence.com>,
        Alan Douglas <adouglas@...ence.com>
Subject: Re: [PATCH 00/31] Introduced new Cadence USBSSP DRD Driver

On 02/08/18 07:26, Pawel Laszczak wrote:
>>> This patch set introduce new Cadence USBSSP DRD driver to linux
>>> kernel.
>>>
>>> The Cadence USBSSP DRD Driver s a highly configurable IP Core which
>>> can be instantiated as Dual-Role Device (DRD), Peripheral Only and
>>> Host Only (XHCI) configurations.
>>>
>>> The current driver has been validated with FPGA burned. We have
>>> support for PCIe bus, which is used on FPGA prototyping.
>>>
>>> The host site of USBSSP controller is compliance with XHCI
>>> specification, so it works with standard XHCI linux driver.
>>>
>>> Also, device side of USBSSP controller was designed in such way to
>>> looks like XHCI. It means that most of logic of USBSSP controller is
>>> also compliance with XHCI specification.
>>>
>>> Consequently, the USBSSP driver for peripheral mode is very similar to
>>> XHCI driver.
>>>
>>> This version of driver supports only Device mode but DRD and Host mode
>>> will be added in the future.
>>>
>>
>> Based on the posting date this series looks like v3.
>>
>> You should add the version prefix to the patches next time.
>> e.g. [PATCH v4 ...]
>>
> I wanted to start versioning driver after this set patch will be approved. 
> Also I have plan to add change-log after approval this patch set. 
> I now treat this patch set as Initial version of driver. 
> If my approach  is incorrect please correct me ??
> Maybe before approval  the better versioning will be [PATCH vrc4] ?

You should prefix patch with RFC.

[RFC PATCH v4]

Drop the RFC and reset version to 1 when things are ready for integration.

>  
>> It is also recommended to add a Change-log in the cover letter explaining
>> what changes were made in each revision.
>>
> I
> 
>> There are a bunch of checkpatch warnings in this series.
>> You can use ./scripts/checkpatch.pl on the patches and fix the issues.
> Yes I know, but most of them are related to "line over 80 characters" 
> and " quoted string split across lines" warnings. The first group I could correct
> but then I will make readability worse. 
> To eliminate the second group I will have to enlarge the first group of warnings and 
> the number of  characters in single line will be bigger than 100.  

Readability is preferred over getting rid of "line over 80 char" warning.
But it is maintainer's call here.

>>> ---
>>>
>>> Pawel Laszczak (31):
>>>   usb: usbssp: Defined register maps and other useful structures.
>>>   usb: usbssp: Added some decoding functions.
>>>   usb: usbssp: Add trace events used in driver
>>>   usb: usbssp: Added USBSSP platform driver
>>>   usb: usbssp: Added first part of initialization sequence.
>>>   usb: usbssp: added template functions used by upper layer.
>>>   usb: usbssp: Initialization - added usbssp_mem_init
>>>   usb: usbssp: Added ring and segment handling functions.
>>>   usb: usbssp: add implementation of usbssp_mem_cleanup
>>>   usb: usbssp: added usbssp_trb_in_td function.
>>>   usb: usbssp: added function for stopping driver.
>>>   usb: usbssp: added functions for queuing commands.
>>>   usb: usbssp: addec procedure for handlin Port Status Change events.
>>>   usb: usbssp: added procedure handling command completion events.
>>>   usb: usbssp: added device controller error, transfer and SETUP
>>>     completion event.
>>>   usb: usbssp: added connect/disconnect procedures.
>>>   usb: usbssp: added implementation of usbssp_halt_endpoint function.
>>>   usb: usbssp: added handling of Port Reset event.
>>>   usb: usbssp: added support for USB enumeration process.
>>>   usb: usbssp: added queuing procedure for control transfer.
>>>   usb: usbssp: added queuing procedure for BULK and INT transfer.
>>>   usb: usbssp: added procedure removing request from transfer ring
>>>   usb: usbssp: added implementation of transfer events.
>>>   usb: usbssp: added detecting command timeout.
>>>   usb: usbssp: added implementation of usbssp interface.
>>>   usb: usbssp: added endpoint configuration functionality.
>>>   usb: usbssp: implements usbssp_gadget_ep_enable function
>>>   usb: usbssp: implemented usbssp_gadget_ep_disable function.
>>>   usb: usbssp: added support for LPM.
>>>   usb: usbssp: added support for TEST_MODE.
>>>   usb: usbssp: add pci to platform driver wrapper.
>>>
>>>  drivers/usb/Kconfig                  |    2 +
>>>  drivers/usb/Makefile                 |    2 +
>>>  drivers/usb/usbssp/Kconfig           |   29 +
>>>  drivers/usb/usbssp/Makefile          |   15 +
>>>  drivers/usb/usbssp/gadget-dbg.c      |   39 +
>>>  drivers/usb/usbssp/gadget-ep0.c      |  571 +++++
>>>  drivers/usb/usbssp/gadget-ext-caps.h |  102 +
>>>  drivers/usb/usbssp/gadget-if.c       |  569 +++++
>>>  drivers/usb/usbssp/gadget-mem.c      | 1938 +++++++++++++++
>>>  drivers/usb/usbssp/gadget-port.c     |  287 +++
>>>  drivers/usb/usbssp/gadget-ring.c     | 3452 ++++++++++++++++++++++++++
>>>  drivers/usb/usbssp/gadget-trace.c    |   13 +
>>>  drivers/usb/usbssp/gadget-trace.h    |  482 ++++
>>>  drivers/usb/usbssp/gadget.c          | 1909 ++++++++++++++
>>>  drivers/usb/usbssp/gadget.h          | 2373 ++++++++++++++++++
>>>  drivers/usb/usbssp/usbssp-pci-wrap.c |  226 ++
>>>  drivers/usb/usbssp/usbssp-plat.c     |  186 ++
>>>  17 files changed, 12195 insertions(+)  create mode 100644
>>> drivers/usb/usbssp/Kconfig  create mode 100644
>>> drivers/usb/usbssp/Makefile  create mode 100644
>>> drivers/usb/usbssp/gadget-dbg.c  create mode 100644
>>> drivers/usb/usbssp/gadget-ep0.c  create mode 100644
>>> drivers/usb/usbssp/gadget-ext-caps.h
>>>  create mode 100644 drivers/usb/usbssp/gadget-if.c  create mode 100644
>>> drivers/usb/usbssp/gadget-mem.c  create mode 100644
>>> drivers/usb/usbssp/gadget-port.c  create mode 100644
>>> drivers/usb/usbssp/gadget-ring.c  create mode 100644
>>> drivers/usb/usbssp/gadget-trace.c  create mode 100644
>>> drivers/usb/usbssp/gadget-trace.h  create mode 100644
>>> drivers/usb/usbssp/gadget.c  create mode 100644
>>> drivers/usb/usbssp/gadget.h  create mode 100644
>>> drivers/usb/usbssp/usbssp-pci-wrap.c
>>>  create mode 100644 drivers/usb/usbssp/usbssp-plat.c
>>>
>>
>> --
> cheers,
> Pawel
> 

-- 
cheers,
-roger

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki