linux-kernel - Re: [PATCH v13 0/7] Enable Bluetooth functionality for WCN3990

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 03 Aug 2018 00:39:26 +0530
From:   Balakrishna Godavarthi <bgodavar@...eaurora.org>
To:     marcel@...tmann.org, johan.hedberg@...il.com, mka@...omium.org
Cc:     linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        linux-bluetooth@...r.kernel.org, thierry.escande@...aro.org,
        rtatiya@...eaurora.org, hemantg@...eaurora.org,
        linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH v13 0/7] Enable Bluetooth functionality for WCN3990

my bad forgot to add subject.

On 2018-08-03 00:37, Balakrishna Godavarthi wrote:
> These patches enables Bluetooth functinalties for new Qualcomm
> Bluetooth chip wnc3990. As this is latest chip with new features,
> along with some common features to old chip "qcom,qca6174-bt".
> we have updated names of functions that are used for both the chips
> to keep this generic and would help in future when we would have new
> BT SoC.
> 
> The below are difference between new and old chips.
> 
> *Power:
>  *New chip: we use voltage regulators to turn on/off the chip and we
>   must send a command on Tx line to turn on/off the chip completely.
>  *Old chip: We turn on/off by setting a GPIO.
> 
>  *Note: Turning on sequence differs between two chips.
> 
> *Firmware download:
>   Only firmware file name differ from New and Old chip.
> 
>   So we reused some functions/structure/variables which are used for 
> old
>   chip to New chip by generic naming (may be future chips may use same
> functions).
> 
>  * As we have multiple changes for functions names,we have tested these 
> patches
>    on both chips.
> 
> v13:
>  * Segregated optional and required properties for wcn3990.
> 
> v12:
>  * removed iteration loop in qca_init_wcn3990
>  * updated review comments.
> 
> v11:
>  * removed regulator current from dtbindings
>  * addressed review comments.
> 
> v10:
>  * update current load with actual values of WCN3990.
>  * added support  for itterative connect with BT chip if it fails to
> respond to the HOST.
>  * Added regulator current dtbindings.
>  * addressed review comments.
> 
> v9:
>  * removed smps regs.
>  * hidded flow control in respective functions.
>  * moved qca_soc_ver to qca_setup
>  * addressed review comments.
> 
> v8:
>   * Squashed [v7 2/8] and [v7 3/8] to one patch.
>   * updated functions to set and get the UART speeds.
>   * addressed review comments.
> 
> v7:
>   * Renamed all the possible function of ROME to generic.
>   * updated with review comments for hci_qca and btqca
>   * fixed kbuild errors.
>   * created wrapper functions for re-usable blocks.
> 
> v6:
>   * Hooked up qca_power to qca_serdev.
>   * renamed all the naming inconsistency functions with qca_*
>   * leveraged common code of ROME for wcn3990.
>   * created wrapper functions for re-usable blocks.
>   * updated function of _*regulator_enable and _*regualtor_disable.
>   * removed redundant comments and functions.
>   * add code to derive the firmware files based on ROM Version.
>   * created new patch for common function of ROME and wcn3990.
>   * enables Qualcomm chip to operate at 3.2Mbps.
>   * updated names of functions that are used for both the chips to
> keep this generic.
> 
> v5:
>   * updated with review comments for hci_qca and btqca
> 
> v4:
>   * rebased all changes on top of bluetooth-next.
>   * addressed review comments.
>   * New patch created for firmware download.
> 
> v3:
>   * Rebased all changes on top of bluetooth-next.
>   * dt-bindings: net: bluetooth: Add device tree bindings for QTI chip 
> wcn3990
>     - added dt-binding snippet for bluetooth chip wcn3990.
>   * Bluetooth: Add support for wcn3990 soc.
>     - updated BT_INFO with bt_dev_info, where ever necessary.
> 
> v2:
>    * Add support for wcn3990:
>     These changes are aligned as per serdev frame work.
>           We implemented these changes on top of
> https://patchwork.kernel.org/patch/10316093/
>         As this patch enable serdev for one of the Qualcomm BT chip.
> 
>         The changes in the patch include.
>         - Adding support to voting up/down regulators for WCN3990.
>            - Bluetooth firmware download for wcn3990.
> 
>   * Add device tree bindings for Atheros chips:
>           These changes are on top of
> https://patchwork.kernel.org/patch/10316097/.
>           - Description of device tree bindings.
> 
> Balakrishna Godavarthi (7):
>   dt-bindings: net: bluetooth: Add device tree bindings for QTI chip
>     wcn3990
>   Bluetooth: btqca: Rename ROME specific functions to generic functions
>   Bluetooth: btqca: Redefine qca_uart_setup() to generic function.
>   Bluetooth: hci_qca: Add wrapper functions for setting UART speed
>   Bluetooth: hci_qca: Enable 3.2 Mbps operating speed.
>   Bluetooth: btqca: Add wcn3990 firmware download support.
>   Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990
> 
>  .../bindings/net/qualcomm-bluetooth.txt       |  29 +-
>  drivers/bluetooth/btqca.c                     | 117 +++--
>  drivers/bluetooth/btqca.h                     |  22 +-
>  drivers/bluetooth/hci_qca.c                   | 483 +++++++++++++++---
>  4 files changed, 535 insertions(+), 116 deletions(-)

-- 
Regards
Balakrishna.