linux-kernel - [PATCH v2 1/3] dt-bindings: interrupt-controller: Actions external interrupt controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 12 Aug 2018 14:22:13 +0200
From:   Parthiban Nallathambi <pn@...x.de>
To:     tglx@...utronix.de, jason@...edaemon.net, marc.zyngier@....com,
        robh+dt@...nel.org, mark.rutland@....com, afaerber@...e.de,
        catalin.marinas@....com, will.deacon@....com,
        manivannan.sadhasivam@...aro.org
Cc:     linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, sravanhome@...il.com,
        thomas.liau@...ions-semi.com, mp-cs@...ions-semi.com,
        linux@...ietech.com, edgar.righi@...tec.org.br,
        laisa.costa@...tec.org.br, guilherme.simoes@...tec.org.br,
        mkzuffo@....usp.br, Parthiban Nallathambi <pn@...x.de>
Subject: [PATCH v2 1/3] dt-bindings: interrupt-controller: Actions external interrupt controller

Actions Semi OWL family SoC's provides support for external interrupt
controller to be connected and controlled using SIRQ pins. S500, S700
and S900 provides 3 SIRQ lines and works independently for 3 external
interrupt controllers.

Signed-off-by: Parthiban Nallathambi <pn@...x.de>
Signed-off-by: Saravanan Sekar <sravanhome@...il.com>
---
 .../interrupt-controller/actions,owl-sirq.txt      | 46 ++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.txt b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.txt
new file mode 100644
index 000000000000..4b8437751331
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.txt
@@ -0,0 +1,46 @@
+Actions Semi Owl SoCs SIRQ interrupt controller
+
+S500, S700 and S900 SoC's from Actions provides 3 SPI's from GIC,
+in which external interrupt controller can be connected. 3 SPI's
+45, 46, 47 from GIC are directly exposed as SIRQ. It has
+the following properties:
+
+- inputs three interrupt signal from external interrupt controller
+
+Required properties:
+
+- compatible: should be "actions,owl-sirq"
+- reg: physical base address of the controller and length of memory mapped.
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: specifies the number of cells needed to encode an interrupt
+  source, should be 2.
+- actions,sirq-shared-reg: Applicable for S500 and S700 where SIRQ register
+  details are maintained at same offset/register.
+- actions,sirq-offset: register offset for SIRQ interrupts. When registers are
+  shared, all the three offsets will be same (S500 and S700).
+- actions,sirq-clk-sel: external interrupt controller can be either
+  connected to 32Khz or 24Mhz external/internal clock. This needs
+  to be configured for per SIRQ line. Failing defaults to 32Khz clock.
+
+Example for S900:
+
+sirq: interrupt-controller@...b0000 {
+	compatible = "actions,owl-sirq";
+	reg = <0 0xe01b0000 0 0x1000>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	actions,sirq-clk-sel = <0 0 0>;
+	actions,sirq-offset = <0x200 0x528 0x52c>;
+};
+
+Example for S500 and S700:
+
+sirq: interrupt-controller@...b0000 {
+	compatible = "actions,owl-sirq";
+	reg = <0 0xe01b0000 0 0x1000>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	actions,sirq-shared-reg;
+	actions,sirq-clk-sel = <0 0 0>;
+	actions,sirq-offset = <0x200 0x200 0x200>;
+};
-- 
2.14.4