linux-kernel - Re: [PATCH 1/2] dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 16 Aug 2018 11:14:25 +0800
From:   Hanjie Lin <hanjie.lin@...ogic.com>
To:     Rob Herring <robh@...nel.org>
CC:     Bjorn Helgaas <bhelgaas@...gle.com>,
        Yue Wang <yue.wang@...ogic.com>,
        Kevin Hilman <khilman@...libre.com>,
        <linux-kernel@...r.kernel.org>, <linux-pci@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-amlogic@...ts.infradead.org>, <devicetree@...r.kernel.org>
Subject: Re: [PATCH 1/2] dt-bindings: PCI: meson: add DT bindings for Amlogic
 Meson PCIe controller



On 2018/8/15 6:53, Rob Herring wrote:
> On Tue, Aug 14, 2018 at 02:18:41AM -0400, Hanjie Lin wrote:
>> From: Yue Wang <yue.wang@...ogic.com>
>>
>> The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare
>> PCI core. This patch adds documentation for the DT bindings in Meson PCIe
>> controller.
>>
>> Signed-off-by: Yue Wang <hanjie.lin@...ogic.com>
>> Signed-off-by: Hanjie Lin <hanjie.lin@...ogic.com>
>> ---
>>  .../devicetree/bindings/pci/amlogic,meson-pcie.txt | 57 ++++++++++++++++++++++
>>  1 file changed, 57 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
>>
>> diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
>> new file mode 100644
>> index 0000000..48233e4
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
>> @@ -0,0 +1,57 @@
>> +Amlogic Meson AXG DWC PCIE SoC controller
>> +
>> +Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
>> +It shares common functions with the PCIe DesignWare core driver and
>> +inherits common properties defined in
>> +Documentation/devicetree/bindings/pci/designware-pci.txt.
>> +
>> +Additional properties are described here:
>> +
>> +Required properties:
>> +- compatible:
>> +	should contain "amlogic,axg-pcie" to identify the core.
>> +- reg:
>> +	Should contain the configuration address space.
>> +- reg-names: Must be
>> +	- "elbi"	External local bus interface registers
>> +	- "cfg"		Meson specific registers
>> +	- "config"	PCIe configuration space
>> +- clocks: Must contain an entry for each entry in clock-names.
>> +- clock-names: Must include the following entries:
>> +	- "pcie"
>> +	- "pcie_bus"
>> +	- "pcie_general"
>> +	- "pcie_mipi_en"
>> +
>> +Example configuration:
>> +
>> +	pcie: pcie@...ff000 {
> 
> Unit-address is wrong.

Yes, I will fix it.

> 
>> +			compatible = "amlogic,axg-pcie", "snps,dw-pcie";
>> +			reg = <0x0 0xf9800000 0x0 0x400000
>> +					0x0 0xff646000 0x0 0x2000
>> +					0x0 0xf9f00000 0x0 0x100000>;
>> +			reg-names = "elbi", "cfg", "config";
>> +			reset-gpio = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
> 
> Not documented and should be reset-gpios.

Yes, is this more clear?
reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal.

> 
>> +			interrupts = <0 177 IRQ_TYPE_EDGE_RISING>;
>> +			#interrupt-cells = <1>;
>> +			interrupt-map-mask = <0 0 0 0>;
>> +			interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
>> +			bus-range = <0x0 0xff>;
>> +			#address-cells = <3>;
>> +			#size-cells = <2>;
>> +			device_type = "pci";
>> +			phys = <&pcie_phy>;
>> +			ranges = <0x82000000 0 0 0x0 0xf9c00000 0 0x00300000>;
>> +			num-lanes = <1>;
>> +			pcie-num = <1>;
> 
> Not documented. What's this?

Yes, pcie-num is an useless parameter. I will delete it.

Thanks for your comments.

> 
>> +
>> +			clocks = <&clkc CLKID_USB
>> +					&clkc CLKID_MIPI_ENABLE
>> +					&clkc CLKID_PCIE_A
>> +					&clkc CLKID_PCIE_CML_EN0>;
>> +			clock-names = "pcie_general",
>> +					"pcie_refpll",
>> +					"pcie_mipi_en",
>> +					"pcie",
>> +					"port";
>> +	};
>> -- 
>> 2.7.4
>>
> 
> .
>