linux-kernel - Re: [PATCH v2 1/3] dt-bindings: soc: Add ZynqMP PM bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 20 Aug 2018 14:49:06 -0500
From:   Rob Herring <robh@...nel.org>
To:     Jolly Shah <jolly.shah@...inx.com>
Cc:     matthias.bgg@...il.com, andy.gross@...aro.org, shawnguo@...nel.org,
        geert+renesas@...der.be, bjorn.andersson@...aro.org,
        sean.wang@...iatek.com, m.szyprowski@...sung.com,
        michal.simek@...inx.com, mark.rutland@....com, rajanv@...inx.com,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, Rajan Vaja <rajan.vaja@...inx.com>,
        Jolly Shah <jollys@...inx.com>
Subject: Re: [PATCH v2 1/3] dt-bindings: soc: Add ZynqMP PM bindings

On Mon, Aug 20, 2018 at 02:40:57PM -0500, Rob Herring wrote:
> On Thu, Aug 16, 2018 at 12:08:01PM -0700, Jolly Shah wrote:
> > From: Rajan Vaja <rajan.vaja@...inx.com>
> > 
> > Add documentation to describe Xilinx ZynqMP power management
> > bindings.
> > 
> > Signed-off-by: Rajan Vaja <rajan.vaja@...inx.com>
> > Signed-off-by: Jolly Shah <jollys@...inx.com>
> > ---
> >  .../bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt    | 16 ++++++++++++++++

Also, this should be located in bindings/power/reset/

> >  1 file changed, 16 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
> > index d215d15..cb9a6b7 100644
> > --- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
> > +++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
> > @@ -64,6 +64,17 @@ Output clocks are registered based on clock information received
> >  from firmware. Output clocks indexes are mentioned in
> >  include/dt-bindings/clock/xlnx,zynqmp-clk.h.
> >  
> > +--------------------------------------------------------------------
> > +Device Tree Bindings for the Xilinx Zynq MPSoC Power Management
> > +--------------------------------------------------------------------
> > +The zynqmp-power node describes the power management configurations.
> > +It will control remote suspend/shutdown interfaces.
> > +
> > +Required properties:
> > + - compatible:		Must contain:	"xlnx,zynqmp-power"
> > + - interrupt-parent:	Interrupt controller the interrupt is routed through
> 
> interrupt-parent is implied and could be in a parent node, so remove.
> 
> With that,
> 
> Reviewed-by: Rob Herring <robh@...nel.org>
> 
> > + - interrupts:		Interrupt specifier
> > +
> >  -------
> >  Example
> >  -------
> > @@ -78,5 +89,10 @@ firmware {
> >  			clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <&gt_crx_ref_clk>;
> >  			clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk";
> >  		};
> > +		zynqmp_power: zynqmp-power {
> > +			compatible = "xlnx,zynqmp-power";
> > +			interrupt-parent = <&gic>;
> > +			interrupts = <0 35 4>;
> > +		};
> >  	};
> >  };
> > -- 
> > 2.7.4
> >