linux-kernel - Re: [PATCH net-next 2/7] net: phy: mscc: add support for VSC8584 PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 14 Sep 2018 19:27:54 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     Quentin Schulz <quentin.schulz@...tlin.com>
Cc:     alexandre.belloni@...tlin.com, ralf@...ux-mips.org,
        paul.burton@...s.com, jhogan@...nel.org, robh+dt@...nel.org,
        mark.rutland@....com, davem@...emloft.net, f.fainelli@...il.com,
        allan.nielsen@...rochip.com, linux-mips@...ux-mips.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        netdev@...r.kernel.org, thomas.petazzoni@...tlin.com,
        antoine.tenart@...tlin.com
Subject: Re: [PATCH net-next 2/7] net: phy: mscc: add support for VSC8584 PHY


>  struct vsc8531_private {
>  	int rate_magic;
>  	u16 supp_led_modes;
> @@ -181,6 +354,7 @@ struct vsc8531_private {
>  	struct vsc85xx_hw_stat *hw_stats;
>  	u64 *stats;
>  	int nstats;
> +	bool pkg_init;

> +/* bus->mdio_lock should be locked when using this function */
> +static int vsc8584_cmd(struct mii_bus *bus, int phy, u16 val)
> +{
> +	unsigned long deadline;
> +	u16 reg_val;
> +
> +	__mdiobus_write(bus, phy, MSCC_EXT_PAGE_ACCESS,
> +			MSCC_PHY_PAGE_EXTENDED_GPIO);
> +
> +	__mdiobus_write(bus, phy, MSCC_PHY_PROC_CMD, PROC_CMD_NCOMPLETED | val);

Hi Quentin

All the __mdiobus_write() look a bit ugly. Maybe add bus and base_addr
to the vsc8531_private structure. Then add helpers
phy_write_base_phy(priv, reg, val) and phy_read_base_phy(priv, reg).

You could also add in:

        if (unlikely(!mutex_is_locked(&priv->bus->mdio_lock))) {
                dev_err(bus->dev, "MDIO bus lock not held!\n");
                dump_stack();
        }

Having such code in the mv88e6xxx driver has found a few bugs for me.

       Andrew