lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Mon, 12 Nov 2018 12:29:30 +0530
From:   Veerabhadrarao Badiganti <vbadigan@...eaurora.org>
To:     adrian.hunter@...el.com, ulf.hansson@...aro.org,
        robh+dt@...nel.org, evgreen@...omium.org, dianders@...gle.com
Cc:     asutoshd@...eaurora.org, riteshh@...eaurora.org,
        stummala@...eaurora.org, sayalil@...eaurora.org,
        linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH V4 2/2] mmc: sdhci-msm: Re-initialize DLL if MCLK is gated
 dynamically


Please ignore this patch set. Right patch-set is V5. 
https://patchwork.kernel.org/project/linux-mmc/list/?series=41661

Sorry for the inconvenience.

Thanks

Veera


On 11/12/2018 11:52 AM, Veerabhadrarao Badiganti wrote:
> On few SDHCI-MSM controllers, the host controller's clock tuning
> circuit may go out of sync if controller clocks are gated which
> eventually will result in data CRC, command CRC/timeout errors.
> To overcome this h/w limitation, the DLL needs to be re-initialized
> and restored with its old settings once clocks are ungated.
>
> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@...eaurora.org>
> ---
>   drivers/mmc/host/sdhci-msm.c | 78 +++++++++++++++++++++++++++++++++++++-------
>   1 file changed, 67 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 3cc8bfe..4cac593 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -232,6 +232,7 @@ struct sdhci_msm_variant_ops {
>    */
>   struct sdhci_msm_variant_info {
>   	bool mci_removed;
> +	bool restore_dll_config;
>   	const struct sdhci_msm_variant_ops *var_ops;
>   	const struct sdhci_msm_offset *offset;
>   };
> @@ -256,6 +257,7 @@ struct sdhci_msm_host {
>   	bool pwr_irq_flag;
>   	u32 caps_0;
>   	bool mci_removed;
> +	bool restore_dll_config;
>   	const struct sdhci_msm_variant_ops *var_ops;
>   	const struct sdhci_msm_offset *offset;
>   };
> @@ -1025,6 +1027,48 @@ static int sdhci_msm_hs400_dll_calibration(struct sdhci_host *host)
>   	return ret;
>   }
>   
> +static bool sdhci_msm_is_tuning_needed(struct sdhci_host *host)
> +{
> +	struct mmc_ios *ios = &host->mmc->ios;
> +
> +	/*
> +	 * Tuning is required for SDR104, HS200 and HS400 cards and
> +	 * if clock frequency is greater than 100MHz in these modes.
> +	 */
> +	if (host->clock <= CORE_FREQ_100MHZ ||
> +	    !(ios->timing == MMC_TIMING_MMC_HS400 ||
> +	    ios->timing == MMC_TIMING_MMC_HS200 ||
> +	    ios->timing == MMC_TIMING_UHS_SDR104) ||
> +	    ios->enhanced_strobe)
> +		return false;
> +
> +	return true;
> +}
> +
> +static int sdhci_msm_restore_sdr_dll_config(struct sdhci_host *host)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
> +	int ret;
> +
> +	/*
> +	 * SDR DLL comes into picture only for timing modes which needs
> +	 * tuning.
> +	 */
> +	if (!sdhci_msm_is_tuning_needed(host))
> +		return 0;
> +
> +	/* Reset the tuning block */
> +	ret = msm_init_cm_dll(host);
> +	if (ret)
> +		return ret;
> +
> +	/* Restore the tuning block */
> +	ret = msm_config_cm_dll_phase(host, msm_host->saved_tuning_phase);
> +
> +	return ret;
> +}
> +
>   static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
>   {
>   	struct sdhci_host *host = mmc_priv(mmc);
> @@ -1035,14 +1079,7 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
>   	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>   	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
>   
> -	/*
> -	 * Tuning is required for SDR104, HS200 and HS400 cards and
> -	 * if clock frequency is greater than 100MHz in these modes.
> -	 */
> -	if (host->clock <= CORE_FREQ_100MHZ ||
> -	    !(ios.timing == MMC_TIMING_MMC_HS400 ||
> -	    ios.timing == MMC_TIMING_MMC_HS200 ||
> -	    ios.timing == MMC_TIMING_UHS_SDR104))
> +	if (!sdhci_msm_is_tuning_needed(host))
>   		return 0;
>   
>   	/*
> @@ -1069,7 +1106,6 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
>   		if (rc)
>   			return rc;
>   
> -		msm_host->saved_tuning_phase = phase;
>   		rc = mmc_send_tuning(mmc, opcode, NULL);
>   		if (!rc) {
>   			/* Tuning is successful at this tuning point */
> @@ -1094,6 +1130,7 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
>   		rc = msm_config_cm_dll_phase(host, phase);
>   		if (rc)
>   			return rc;
> +		msm_host->saved_tuning_phase = phase;
>   		dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
>   			 mmc_hostname(mmc), phase);
>   	} else {
> @@ -1616,7 +1653,6 @@ static void sdhci_msm_set_regulator_caps(struct sdhci_msm_host *msm_host)
>   };
>   
>   static const struct sdhci_msm_variant_info sdhci_msm_mci_var = {
> -	.mci_removed = false,
>   	.var_ops = &mci_var_ops,
>   	.offset = &sdhci_msm_mci_offset,
>   };
> @@ -1627,9 +1663,17 @@ static void sdhci_msm_set_regulator_caps(struct sdhci_msm_host *msm_host)
>   	.offset = &sdhci_msm_v5_offset,
>   };
>   
> +static const struct sdhci_msm_variant_info sdm845_sdhci_var = {
> +	.mci_removed = true,
> +	.restore_dll_config = true,
> +	.var_ops = &v5_var_ops,
> +	.offset = &sdhci_msm_v5_offset,
> +};
> +
>   static const struct of_device_id sdhci_msm_dt_match[] = {
>   	{.compatible = "qcom,sdhci-msm-v4", .data = &sdhci_msm_mci_var},
>   	{.compatible = "qcom,sdhci-msm-v5", .data = &sdhci_msm_v5_var},
> +	{.compatible = "qcom,sdm845-sdhci", .data = &sdm845_sdhci_var},
>   	{},
>   };
>   
> @@ -1689,6 +1733,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
>   	var_info = of_device_get_match_data(&pdev->dev);
>   
>   	msm_host->mci_removed = var_info->mci_removed;
> +	msm_host->restore_dll_config = var_info->restore_dll_config;
>   	msm_host->var_ops = var_info->var_ops;
>   	msm_host->offset = var_info->offset;
>   
> @@ -1928,9 +1973,20 @@ static int sdhci_msm_runtime_resume(struct device *dev)
>   	struct sdhci_host *host = dev_get_drvdata(dev);
>   	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>   	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
> +	int ret;
>   
> -	return clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks),
> +	ret = clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks),
>   				       msm_host->bulk_clks);
> +	if (ret)
> +		return ret;
> +	/*
> +	 * Whenever core-clock is gated dynamically, it's needed to
> +	 * restore the SDR DLL settings when the clock is ungated.
> +	 */
> +	if (msm_host->restore_dll_config && msm_host->clk_rate)
> +		return sdhci_msm_restore_sdr_dll_config(host);
> +
> +	return 0;
>   }
>   #endif
>   

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ