linux-kernel - Re: [PATCH] can: flexcan: Implement CAN Runtime PM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 27 Nov 2018 08:52:10 +0100
From:   Marc Kleine-Budde <mkl@...gutronix.de>
To:     Joakim Zhang <qiangqing.zhang@....com>,
        "wg@...ndegger.com" <wg@...ndegger.com>,
        "davem@...emloft.net" <davem@...emloft.net>
Cc:     "linux-can@...r.kernel.org" <linux-can@...r.kernel.org>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        dl-linux-imx <linux-imx@....com>,
        Aisheng DONG <aisheng.dong@....com>
Subject: Re: [PATCH] can: flexcan: Implement CAN Runtime PM

On 11/27/18 8:44 AM, Joakim Zhang wrote:
>>> Flexcan will be disabled during suspend if no wakeup function required
>>> and enabled after resume accordingly. During this period, we could
>>> explicitly disable clocks.
>>>
>>> Implement Runtime PM which will:
>>> 1) Keep device in suspend state (clocks disabled) if it's not openned
>>> 2) Make Power Domain framework be able to shutdown the corresponding
>>> power domain of this device.
>>
>> Without CONFIG_PM the device fails to probe:
>>
>>> [  214.420606] flexcan 2090000.flexcan: 2090000.flexcan supply xceiver
>>> not found, using dummy regulator [  214.445952] flexcan
>>> 2090000.flexcan: Linked as a consumer to regulator.0 [  214.453448]
>>> flexcan 2090000.flexcan: registering netdev failed [  214.459666]
>>> flexcan 2090000.flexcan: Dropping the link to regulator.0 [
>>> 214.472066] flexcan: probe of 2090000.flexcan failed with error -110

> I would sent V2 rebased on patch "can: flexcan: add self wakeup
> support", and runtime pm works normally on MX6SX-SDB and MX7D-SDB.
> So, could you tell me which board you tested on that causes the
> device probe failed?

I tested on an imx6dl riotboard
(https://elixir.bootlin.com/linux/latest/source/arch/arm/boot/dts/imx6dl-riotboard.dts
+ patches to enable CAN1) with an external PHY.

> And that CONFIG_PM has set in imx_v6_v7_defconfig which config file I used.

I disabled CONFIG_PM on purpose.

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |