linux-kernel - Re: [PATCH 1/2] USB: storage: don't insert sane sense for SPC3+ when bad sense specified

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 27 Dec 2018 22:38:05 +0800
From:   Icenowy Zheng <icenowy@...c.io>
To:     Alan Stern <stern@...land.harvard.edu>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        linux-usb@...r.kernel.org, usb-storage@...ts.one-eyed-alien.net,
        linux-kernel@...r.kernel.org
Cc:     stable@...r.kernel.org
Subject: Re: [PATCH 1/2] USB: storage: don't insert sane sense for SPC3+
 when bad sense specified

在 2018-12-27四的 22:34 +0800，Icenowy Zheng写道：
> Currently the code will set US_FL_SANE_SENSE flag unconditionally if
> device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to
> prevent this behavior, because SMI SM3350 UFS-USB bridge controller,
> which claims SPC4, will show strange behavior with 96-byte sense
> (put the chip into a wrong state that cannot read/write anything).
> 
> Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE
> on
> SPC4+ devices.
> 
> Signed-off-by: Icenowy Zheng <icenowy@...c.io>
> ---

I forgot to:

Cc: stable@...r.kernel.org

>  drivers/usb/storage/scsiglue.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/storage/scsiglue.c
> b/drivers/usb/storage/scsiglue.c
> index fde2e71a6ade..699fe9557127 100644
> --- a/drivers/usb/storage/scsiglue.c
> +++ b/drivers/usb/storage/scsiglue.c
> @@ -236,7 +236,8 @@ static int slave_configure(struct scsi_device
> *sdev)
>  			sdev->try_rc_10_first = 1;
>  
>  		/* assume SPC3 or latter devices support sense size >
> 18 */
> -		if (sdev->scsi_level > SCSI_SPC_2)
> +		if (sdev->scsi_level > SCSI_SPC_2 &&
> +		    !(us->fflags & US_FL_BAD_SENSE))
>  			us->fflags |= US_FL_SANE_SENSE;
>  
>  		/*