| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 31 Jan 2019 13:09:35 +0200
From: Janne Karhunen <janne.karhunen@...il.com>
To: Alexei Starovoitov <alexei.starovoitov@...il.com>
Cc: Masahiro Yamada <yamada.masahiro@...ionext.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 2/3] bpfilter: include bpfilter_umh in assembly instead
of using objcopy
Hi,
Never mind, not enough coffee for the morning. Looks good addressing
wise, but something goes haywire with the copy. Some size limitation?
[ 84.402647] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.10.2-1ubuntu1 04/01/2014
[ 84.403899] RIP: 0010:__memcpy+0x12/0x20
[ 84.404441] Code: c1 e2 20 48 09 d0 48 31 c3 e9 76 ff ff ff 90 90
90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 89 f8 48 89 d1 48 c1 e9 03
83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1
f3 a4
[ 84.407004] RSP: 0018:ffffc90000ac39c0 EFLAGS: 00010246
[ 84.407714] RAX: ffff888041709000 RBX: 0000000000001000 RCX: 0000000000000200
[ 84.408667] RDX: 0000000000000000 RSI: ffffffff82a7cb4d RDI: ffff888041709000
[ 84.409668] RBP: ffffc90000ac3a08 R08: ffff888041709000 R09: 0000000000000000
[ 84.410621] R10: 0000000000000000 R11: 000015fffefa3dbf R12: 0000000000001000
[ 84.411710] R13: 0000000000001000 R14: ffffc90000ac3b28 R15: 0000000000001000
[ 84.412675] FS: 00007f6cd3a35740(0000) GS:ffff88807da00000(0000)
knlGS:0000000000000000
[ 84.413805] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 84.414655] CR2: ffffffff82a7cb4d CR3: 0000000031344000 CR4: 00000000000006f0
[ 84.415656] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 84.416647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 84.417619] Call Trace:
[ 84.417996] ? iov_iter_copy_from_user_atomic+0x21b/0x360
[ 84.418754] ? shmem_write_begin+0x4a/0x80
[ 84.419396] generic_perform_write+0xdd/0x1b0
[ 84.419897] __generic_file_write_iter+0x1ab/0x1d0
[ 84.420453] ? apparmor_file_alloc_security+0x4c/0x230
[ 84.421082] ? kmem_cache_alloc+0x1b5/0x1d0
[ 84.421677] generic_file_write_iter+0xb3/0x150
[ 84.422353] __vfs_write+0x145/0x1d0
[ 84.422907] vfs_write+0xae/0x1a0
[ 84.423435] kernel_write+0x55/0x70
[ 84.423996] fork_usermode_blob+0x85/0x11b
..
ret = fork_usermode_blob(&test_umh_start,
&test_umh_end - &test_umh_start, &um_info);
Addresses indeed seem ok and the '-fpic -fpie -fPIE -static' compiled
user mode blob sits in between those symbols correctly. Hummm ?
--
Janne
On Thu, Jan 31, 2019 at 12:48 PM Janne Karhunen
<janne.karhunen@...il.com> wrote:
>
> Hi,
>
> Hmm, does this approach work if the code is not in a kernel module? I
> tried to use it as part of the kernel image and looks to me the
> bounding symbols _start and _end are not correctly relocated?
>
> --
> Janne
>
> On Fri, Jun 15, 2018 at 3:48 AM Alexei Starovoitov
> <alexei.starovoitov@...il.com> wrote:
> >
> > On Thu, Jun 14, 2018 at 11:39:31PM +0900, Masahiro Yamada wrote:
> > > What we want here is to embed a user-space program into the kernel.
> > > Instead of the complex ELF magic, let's simply wrap it in the assembly
> > > with the '.incbin' directive.
> > >
> > > Signed-off-by: Masahiro Yamada <yamada.masahiro@...ionext.com>
> > > ---
> > >
> > > Changes in v2:
> > > - Rebase
> > >
> > > net/bpfilter/Makefile | 15 ++-------------
> > > net/bpfilter/bpfilter_kern.c | 11 +++++------
> > > net/bpfilter/bpfilter_umh_blob.S | 7 +++++++
> > > 3 files changed, 14 insertions(+), 19 deletions(-)
> > > create mode 100644 net/bpfilter/bpfilter_umh_blob.S
> > >
> > > diff --git a/net/bpfilter/Makefile b/net/bpfilter/Makefile
> > > index e0bbe75..39c6980 100644
> > > --- a/net/bpfilter/Makefile
> > > +++ b/net/bpfilter/Makefile
> > > @@ -15,18 +15,7 @@ ifeq ($(CONFIG_BPFILTER_UMH), y)
> > > HOSTLDFLAGS += -static
> > > endif
> > >
> > > -# a bit of elf magic to convert bpfilter_umh binary into a binary blob
> > > -# inside bpfilter_umh.o elf file referenced by
> > > -# _binary_net_bpfilter_bpfilter_umh_start symbol
> > > -# which bpfilter_kern.c passes further into umh blob loader at run-time
> > > -quiet_cmd_copy_umh = GEN $@
> > > - cmd_copy_umh = echo ':' > $(obj)/.bpfilter_umh.o.cmd; \
> > > - $(OBJCOPY) -I binary -O `$(OBJDUMP) -f $<|grep format|cut -d' ' -f8` \
> > > - -B `$(OBJDUMP) -f $<|grep architecture|cut -d, -f1|cut -d' ' -f2` \
> > > - --rename-section .data=.init.rodata $< $@
> > > -
> > > -$(obj)/bpfilter_umh.o: $(obj)/bpfilter_umh
> > > - $(call cmd,copy_umh)
> > > +$(obj)/bpfilter_umh_blob.o: $(obj)/bpfilter_umh
> > >
> > > obj-$(CONFIG_BPFILTER_UMH) += bpfilter.o
> > > -bpfilter-objs += bpfilter_kern.o bpfilter_umh.o
> > > +bpfilter-objs += bpfilter_kern.o bpfilter_umh_blob.o
> > > diff --git a/net/bpfilter/bpfilter_kern.c b/net/bpfilter/bpfilter_kern.c
> > > index 0952257..6de3ae5 100644
> > > --- a/net/bpfilter/bpfilter_kern.c
> > > +++ b/net/bpfilter/bpfilter_kern.c
> > > @@ -10,11 +10,8 @@
> > > #include <linux/file.h>
> > > #include "msgfmt.h"
> > >
> > > -#define UMH_start _binary_net_bpfilter_bpfilter_umh_start
> > > -#define UMH_end _binary_net_bpfilter_bpfilter_umh_end
> > > -
> > > -extern char UMH_start;
> > > -extern char UMH_end;
> > > +extern char bpfilter_umh_start;
> > > +extern char bpfilter_umh_end;
> > >
> > > static struct umh_info info;
> > > /* since ip_getsockopt() can run in parallel, serialize access to umh */
> > > @@ -93,7 +90,9 @@ static int __init load_umh(void)
> > > int err;
> > >
> > > /* fork usermode process */
> > > - err = fork_usermode_blob(&UMH_start, &UMH_end - &UMH_start, &info);
> > > + err = fork_usermode_blob(&bpfilter_umh_end,
> > > + &bpfilter_umh_end - &bpfilter_umh_start,
> > > + &info);
> > > if (err)
> > > return err;
> > > pr_info("Loaded bpfilter_umh pid %d\n", info.pid);
> > > diff --git a/net/bpfilter/bpfilter_umh_blob.S b/net/bpfilter/bpfilter_umh_blob.S
> > > new file mode 100644
> > > index 0000000..40311d1
> > > --- /dev/null
> > > +++ b/net/bpfilter/bpfilter_umh_blob.S
> > > @@ -0,0 +1,7 @@
> > > +/* SPDX-License-Identifier: GPL-2.0 */
> > > + .section .init.rodata, "a"
> > > + .global bpfilter_umh_start
> > > +bpfilter_umh_start:
> > > + .incbin "net/bpfilter/bpfilter_umh"
> > > + .global bpfilter_umh_end
> > > +bpfilter_umh_end:
> >
> > for some reason it doesn't work.
> > fork_usermode_blob() returns ENOEXEC
> > You should be able to test it simply running 'iptables -L'.
> > Without this patch you should see:
> > [ 12.696937] bpfilter: Loaded bpfilter_umh pid 225
> > Started bpfilter
> >
> > where first line comes from kernel module and second from umh.
> >
> >
Powered by blists - more mailing lists