linux-kernel - [PATCH 0/9] ARM: sun9i: a80: Enable GMAC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190206033239.3619-1-wens@csie.org>
Date:   Wed,  6 Feb 2019 11:32:30 +0800
From:   Chen-Yu Tsai <wens@...e.org>
To:     Maxime Ripard <maxime.ripard@...tlin.com>,
        Linus Walleij <linus.walleij@...aro.org>
Cc:     Chen-Yu Tsai <wens@...e.org>, linux-arm-kernel@...ts.infradead.org,
        linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: [PATCH 0/9] ARM: sun9i: a80: Enable GMAC

Hi everyone,

On the Allwinner A80, the PIO pin controller includes configuration
registers to set the I/O voltage. These must match the actual voltage
provided externally. A mismatch results in signals not being passed
through.

With the new PIO pin-bank regulator supply support in place, we can
tack on support for setting up these registers.

This in turn allows us to enable the GMAC, which runs at a reduced
2.5V for RGMII, instead of the standard 3.0V or 3.3V.

Please have a look.


Regards
ChenYu


Chen-Yu Tsai (9):
  pinctrl: sunxi: Support I/O bias voltage setting on A80
  ARM: dts: sun9i: a80-optimus: Add node for AXP809's unused dc1sw
    regulator
  ARM: dts: sun9i: a80-optimus: Add GPIO pin-bank regulator supplies
  ARM: dts: sun9i: cubieboard4: Add GPIO pin-bank regulator supplies
  ARM: dts: sun9i: Add GMAC clock node
  ARM: dts: sun9i: Add A80 GMAC gigabit ethernet controller node
  ARM: dts: sun9i: Add A80 GMAC RGMII pinmux setting
  ARM: dts: sun9i: a80-optimus: Enable GMAC
  ARM: dts: sun9i: cubieboard4: Enable GMAC

 arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 44 +++++++++++++-
 arch/arm/boot/dts/sun9i-a80-optimus.dts     | 44 +++++++++++++-
 arch/arm/boot/dts/sun9i-a80.dtsi            | 65 +++++++++++++++++++++
 drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c |  1 +
 drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c   |  1 +
 drivers/pinctrl/sunxi/pinctrl-sunxi.c       | 41 +++++++++++++
 drivers/pinctrl/sunxi/pinctrl-sunxi.h       | 12 ++++
 7 files changed, 202 insertions(+), 6 deletions(-)

-- 
2.20.1