| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 27 Mar 2019 22:39:33 -0700 (PDT)
From: Palmer Dabbelt <palmer@...ive.com>
To: logang@...tatee.com
CC: linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org,
sbates@...thlin.com, Christoph Hellwig <hch@....de>,
aou@...s.berkeley.edu, logang@...tatee.com,
antonynpavlov@...il.com, sorear2@...il.com, anup.patel@....com
Subject: Re: [PATCH 3/7] RISC-V: Rework kernel's virtual address space mapping
On Wed, 27 Mar 2019 14:36:39 PDT (-0700), logang@...tatee.com wrote:
> The motivation for this is to support P2P transactions. P2P requires
> having struct pages for IO memory which means the linear mapping must
> be able to cover all of the IO regions. Unfortunately with Sv39 we are
> not able to cover all the IO regions available on existing hardware,
> but we can do better than what we currently do (which only cover's
> physical memory).
>
> To this end, we restructure the kernel's virtual address space region.
> We position the vmemmap at the beginning of the region (based on how
> many virtual address bits we have) and the VMALLOC region comes
> immediately after. The linear mapping then takes up the remaining space.
> PAGE_OFFSET will need to be within the linear mapping but may not be
> the start of the mapping seeing many machines don't have RAM at address
> zero and we may still want to access lower addresses through the
> linear mapping.
>
> With these changes, on a 64-bit system the virtual memory map (with
> sparsemem enabled) will be:
>
> 32-bit:
>
> 00000000 - 7fffffff user space, different per mm (2G)
> 80000000 - 81ffffff virtual memory map (32MB)
> 82000000 - bfffffff vmalloc/ioremap space (1GB - 32MB)
> c0000000 - ffffffff direct mapping of all phys. memory (1GB)
>
> 64-bit, Sv39:
>
> 0000000000000000 - 0000003fffffffff user space, different per mm (256GB)
> hole caused by [38:63] sign extension
> ffffffc000000000 - ffffffc0ffffffff virtual memory map (4GB)
> ffffffc100000000 - ffffffd0ffffffff vmalloc/ioremap spac (64GB)
> ffffffd100000000 - ffffffffffffffff linear mapping of phys. space (188GB)
>
> On the Sifive hardware this allows us to provide struct pages for
> the lower I/O TileLink address ranges, the 32-bit and 34-bit DRAM areas
> and 172GB of 240GB of the high I/O TileLink region. Once we progress to
> Sv48 we should be able to cover all the available memory regions..
>
> For the MAXPHYSMEM_2GB case, the physical memory must be in the highest
> 2GB of address space, so we cannot cover the any of the I/O regions
> that are higher than it but we do cover the lower I/O TileLink range.
IIRC there was another patch floating around to fix an issue with overlapping
regions in the 32-bit port, did you also fix that issue? It's somewhere in my
email queue...
> Signed-off-by: Logan Gunthorpe <logang@...tatee.com>
> Cc: Palmer Dabbelt <palmer@...ive.com>
> Cc: Albert Ou <aou@...s.berkeley.edu>
> Cc: Antony Pavlov <antonynpavlov@...il.com>
> Cc: "Stefan O'Rear" <sorear2@...il.com>
> Cc: Anup Patel <anup.patel@....com>
> ---
> arch/riscv/Kconfig | 2 +-
> arch/riscv/include/asm/page.h | 2 --
> arch/riscv/include/asm/pgtable.h | 27 ++++++++++++++++++---------
> 3 files changed, 19 insertions(+), 12 deletions(-)
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 76fc340ae38e..d21e6a12e8b6 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -71,7 +71,7 @@ config PAGE_OFFSET
> hex
> default 0xC0000000 if 32BIT && MAXPHYSMEM_2GB
> default 0xffffffff80000000 if 64BIT && MAXPHYSMEM_2GB
> - default 0xffffffe000000000 if 64BIT && MAXPHYSMEM_128GB
> + default 0xffffffd200000000 if 64BIT && MAXPHYSMEM_128GB
>
> config ARCH_FLATMEM_ENABLE
> def_bool y
> diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h
> index 2a546a52f02a..fa0b8058a246 100644
> --- a/arch/riscv/include/asm/page.h
> +++ b/arch/riscv/include/asm/page.h
> @@ -31,8 +31,6 @@
> */
> #define PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL)
>
> -#define KERN_VIRT_SIZE (-PAGE_OFFSET)
> -
> #ifndef __ASSEMBLY__
>
> #define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
> diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> index 5a9fea00ba09..2a5070540996 100644
> --- a/arch/riscv/include/asm/pgtable.h
> +++ b/arch/riscv/include/asm/pgtable.h
> @@ -89,22 +89,31 @@ extern pgd_t swapper_pg_dir[];
> #define __S110 PAGE_SHARED_EXEC
> #define __S111 PAGE_SHARED_EXEC
>
> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> -#define VMALLOC_END (PAGE_OFFSET - 1)
> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> +#define KERN_SPACE_START (-1UL << (CONFIG_VA_BITS - 1))
>
> /*
> * Roughly size the vmemmap space to be large enough to fit enough
> * struct pages to map half the virtual address space. Then
> * position vmemmap directly below the VMALLOC region.
> */
> -#define VMEMMAP_SHIFT \
> - (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
> -#define VMEMMAP_SIZE (1UL << VMEMMAP_SHIFT)
> -#define VMEMMAP_END (VMALLOC_START - 1)
> -#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> -
> +#ifdef CONFIG_SPARSEMEM
> +#define VMEMMAP_SIZE (UL(1) << (CONFIG_VA_BITS - PAGE_SHIFT - 1 + \
> + STRUCT_PAGE_MAX_SHIFT))
> +#define VMEMMAP_START (KERN_SPACE_START)
> +#define VMEMMAP_END (VMEMMAP_START + VMEMMAP_SIZE - 1)
> #define vmemmap ((struct page *)VMEMMAP_START)
> +#else
> +#define VMEMMAP_END KERN_SPACE_START
> +#endif
> +
> +#ifdef CONFIG_32BIT
> +#define VMALLOC_SIZE ((1UL << 30) - VMEMMAP_SIZE)
> +#else
> +#define VMALLOC_SIZE (64UL << 30)
> +#endif
> +
> +#define VMALLOC_START (VMEMMAP_END + 1)
> +#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE - 1)
>
> /*
> * ZERO_PAGE is a global shared page that is always zero,
Powered by blists - more mailing lists