linux-kernel - [PATCH 07/15] dt: thermal: tsens: Document interrupt support in tsens driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 26 Jul 2019 03:48:42 +0530
From:   Amit Kucheria <amit.kucheria@...aro.org>
To:     linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        bjorn.andersson@...aro.org, edubezval@...il.com,
        andy.gross@...aro.org, Andy Gross <agross@...nel.org>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        Mark Rutland <mark.rutland@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Zhang Rui <rui.zhang@...el.com>
Cc:     linux-pm@...r.kernel.org, devicetree@...r.kernel.org
Subject: [PATCH 07/15] dt: thermal: tsens: Document interrupt support in tsens driver

Define two new required properties to define interrupts and
interrupt-names for tsens.

Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.txt | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
index 673cc1831ee9..3d3dd5dc6d36 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
@@ -22,6 +22,8 @@ Required properties:
 
 - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
 - #qcom,sensors: Number of sensors in tsens block
+- interrupts: Interrupts generated from Always-On subsystem (AOSS)
+- interrupt-names: The name of the interrupt e.g. "tsens0", "tsens1"
 - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
 nvmem cells
 
@@ -40,6 +42,9 @@ tsens0: thermal-sensor@...3000 {
 		reg = <0xc263000 0x1ff>, /* TM */
 			<0xc222000 0x1ff>; /* SROT */
 		#qcom,sensors = <13>;
+		interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tsens0";
+
 		#thermal-sensor-cells = <1>;
 	};
 
-- 
2.17.1