| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 29 Jul 2019 09:57:41 +0000
From: Richard Zhu <hongxing.zhu@....com>
To: Oleksij Rempel <o.rempel@...gutronix.de>
CC: "jassisinghbrar@...il.com" <jassisinghbrar@...il.com>,
Aisheng Dong <aisheng.dong@....com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: RE: [EXT] Re: [PATCH] mailbox: imx: add support for imx v1 mu
> -----Original Message-----
> From: Oleksij Rempel <o.rempel@...gutronix.de>
> Sent: 2019年7月29日 16:38
> To: Richard Zhu <hongxing.zhu@....com>
> Cc: jassisinghbrar@...il.com; Aisheng Dong <aisheng.dong@....com>;
> linux-kernel@...r.kernel.org; linux-arm-kernel@...ts.infradead.org
> Subject: [EXT] Re: [PATCH] mailbox: imx: add support for imx v1 mu
>
>
> please use format [PATCH v2] description. It is automatically done with git
> format-patch -v2
>
> On Mon, Jul 29, 2019 at 10:14:00AM +0800, Richard Zhu wrote:
> > There is a version1.0 MU on i.MX7ULP platform.
> > One new version ID register is added, and it's offset is 0.
> > TRn registers are defined at the offset 0x20 ~ 0x2C.
> > RRn registers are defined at the offset 0x40 ~ 0x4C.
> > SR/CR registers are defined at 0x60/0x64.
> > Extend this driver to support it.
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu@....com>
> > ---
>
> change log can be done here or in a message automatically generate by format
> patch:
> git format-patch --cover-letter -v2
>
[Richard Zhu] Great. Thanks for the format guidance.
Would use it to send out the v3 patch.
Thanks.
> > drivers/mailbox/imx-mailbox.c | 67
> > ++++++++++++++++++++++++++++++++-----------
> > 1 file changed, 50 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/mailbox/imx-mailbox.c
> > b/drivers/mailbox/imx-mailbox.c index 25be8bb..8423a38 100644
> > --- a/drivers/mailbox/imx-mailbox.c
> > +++ b/drivers/mailbox/imx-mailbox.c
> > @@ -12,19 +12,11 @@
> > #include <linux/of_device.h>
> > #include <linux/slab.h>
> >
> > -/* Transmit Register */
> > -#define IMX_MU_xTRn(x) (0x00 + 4 * (x))
> > -/* Receive Register */
> > -#define IMX_MU_xRRn(x) (0x10 + 4 * (x))
> > -/* Status Register */
> > -#define IMX_MU_xSR 0x20
> > #define IMX_MU_xSR_GIPn(x) BIT(28 + (3 - (x)))
> > #define IMX_MU_xSR_RFn(x) BIT(24 + (3 - (x)))
> > #define IMX_MU_xSR_TEn(x) BIT(20 + (3 - (x)))
> > #define IMX_MU_xSR_BRDIP BIT(9)
> >
> > -/* Control Register */
> > -#define IMX_MU_xCR 0x24
> > /* General Purpose Interrupt Enable */
> > #define IMX_MU_xCR_GIEn(x) BIT(28 + (3 - (x)))
> > /* Receive Interrupt Enable */
> > @@ -44,6 +36,13 @@ enum imx_mu_chan_type {
> > IMX_MU_TYPE_RXDB, /* Rx doorbell */
> > };
> >
> > +struct imx_mu_dcfg {
> > + u32 xTR[4]; /* Transmit Registers */
> > + u32 xRR[4]; /* Receive Registers */
> > + u32 xSR; /* Status Register */
> > + u32 xCR; /* Control Register */
> > +};
> > +
> > struct imx_mu_con_priv {
> > unsigned int idx;
> > char irq_desc[IMX_MU_CHAN_NAME_SIZE];
> > @@ -61,12 +60,39 @@ struct imx_mu_priv {
> > struct mbox_chan mbox_chans[IMX_MU_CHANS];
> >
> > struct imx_mu_con_priv con_priv[IMX_MU_CHANS];
> > + const struct imx_mu_dcfg *dcfg;
> > struct clk *clk;
> > int irq;
> >
> > bool side_b;
> > };
> >
> > +static const struct imx_mu_dcfg imx_mu_cfg_imx6sx = {
> > + .xTR[0] = 0x0,
> > + .xTR[1] = 0x4,
> > + .xTR[2] = 0x8,
> > + .xTR[3] = 0xC,
>
> I would prefer to init arrays this way:
> .xTR[] = {0x0, 0x4, 0x8, 0xc},
>
> For every thing else
> Reviewed-by: Oleksij Rempel <o.rempel@...gutronix.de>
>
[Richard Zhu] Okay, thanks.
> > + .xRR[0] = 0x10,
> > + .xRR[1] = 0x14,
> > + .xRR[2] = 0x18,
> > + .xRR[3] = 0x1C,
> > + .xSR = 0x20,
> > + .xCR = 0x24,
> > +};
> > +
> > +static const struct imx_mu_dcfg imx_mu_cfg_imx7ulp = {
> > + .xTR[0] = 0x20,
> > + .xTR[1] = 0x24,
> > + .xTR[2] = 0x28,
> > + .xTR[3] = 0x2C,
> > + .xRR[0] = 0x40,
> > + .xRR[1] = 0x44,
> > + .xRR[2] = 0x48,
> > + .xRR[3] = 0x4C,
> > + .xSR = 0x60,
> > + .xCR = 0x64,
> > +};
> > +
> > static struct imx_mu_priv *to_imx_mu_priv(struct mbox_controller
> > *mbox) {
> > return container_of(mbox, struct imx_mu_priv, mbox); @@ -88,10
> > +114,10 @@ static u32 imx_mu_xcr_rmw(struct imx_mu_priv *priv, u32 set,
> u32 clr)
> > u32 val;
> >
> > spin_lock_irqsave(&priv->xcr_lock, flags);
> > - val = imx_mu_read(priv, IMX_MU_xCR);
> > + val = imx_mu_read(priv, priv->dcfg->xCR);
> > val &= ~clr;
> > val |= set;
> > - imx_mu_write(priv, val, IMX_MU_xCR);
> > + imx_mu_write(priv, val, priv->dcfg->xCR);
> > spin_unlock_irqrestore(&priv->xcr_lock, flags);
> >
> > return val;
> > @@ -111,8 +137,8 @@ static irqreturn_t imx_mu_isr(int irq, void *p)
> > struct imx_mu_con_priv *cp = chan->con_priv;
> > u32 val, ctrl, dat;
> >
> > - ctrl = imx_mu_read(priv, IMX_MU_xCR);
> > - val = imx_mu_read(priv, IMX_MU_xSR);
> > + ctrl = imx_mu_read(priv, priv->dcfg->xCR);
> > + val = imx_mu_read(priv, priv->dcfg->xSR);
> >
> > switch (cp->type) {
> > case IMX_MU_TYPE_TX:
> > @@ -138,10 +164,10 @@ static irqreturn_t imx_mu_isr(int irq, void *p)
> > imx_mu_xcr_rmw(priv, 0, IMX_MU_xCR_TIEn(cp->idx));
> > mbox_chan_txdone(chan, 0);
> > } else if (val == IMX_MU_xSR_RFn(cp->idx)) {
> > - dat = imx_mu_read(priv, IMX_MU_xRRn(cp->idx));
> > + dat = imx_mu_read(priv, priv->dcfg->xRR[cp->idx]);
> > mbox_chan_received_data(chan, (void *)&dat);
> > } else if (val == IMX_MU_xSR_GIPn(cp->idx)) {
> > - imx_mu_write(priv, IMX_MU_xSR_GIPn(cp->idx),
> IMX_MU_xSR);
> > + imx_mu_write(priv, IMX_MU_xSR_GIPn(cp->idx),
> > + priv->dcfg->xSR);
> > mbox_chan_received_data(chan, NULL);
> > } else {
> > dev_warn_ratelimited(priv->dev, "Not handled
> > interrupt\n"); @@ -159,7 +185,7 @@ static int imx_mu_send_data(struct
> > mbox_chan *chan, void *data)
> >
> > switch (cp->type) {
> > case IMX_MU_TYPE_TX:
> > - imx_mu_write(priv, *arg, IMX_MU_xTRn(cp->idx));
> > + imx_mu_write(priv, *arg, priv->dcfg->xTR[cp->idx]);
> > imx_mu_xcr_rmw(priv, IMX_MU_xCR_TIEn(cp->idx), 0);
> > break;
> > case IMX_MU_TYPE_TXDB:
> > @@ -257,7 +283,7 @@ static void imx_mu_init_generic(struct imx_mu_priv
> *priv)
> > return;
> >
> > /* Set default MU configuration */
> > - imx_mu_write(priv, 0, IMX_MU_xCR);
> > + imx_mu_write(priv, 0, priv->dcfg->xCR);
> > }
> >
> > static int imx_mu_probe(struct platform_device *pdev) @@ -265,6
> > +291,7 @@ static int imx_mu_probe(struct platform_device *pdev)
> > struct device *dev = &pdev->dev;
> > struct device_node *np = dev->of_node;
> > struct imx_mu_priv *priv;
> > + const struct imx_mu_dcfg *dcfg;
> > unsigned int i;
> > int ret;
> >
> > @@ -282,6 +309,11 @@ static int imx_mu_probe(struct platform_device
> *pdev)
> > if (priv->irq < 0)
> > return priv->irq;
> >
> > + dcfg = of_device_get_match_data(dev);
> > + if (!dcfg)
> > + return -EINVAL;
> > + priv->dcfg = dcfg;
> > +
> > priv->clk = devm_clk_get(dev, NULL);
> > if (IS_ERR(priv->clk)) {
> > if (PTR_ERR(priv->clk) != -ENOENT) @@ -335,7 +367,8 @@
> > static int imx_mu_remove(struct platform_device *pdev) }
> >
> > static const struct of_device_id imx_mu_dt_ids[] = {
> > - { .compatible = "fsl,imx6sx-mu" },
> > + { .compatible = "fsl,imx7ulp-mu", .data = &imx_mu_cfg_imx7ulp },
> > + { .compatible = "fsl,imx6sx-mu", .data = &imx_mu_cfg_imx6sx },
> > { },
> > };
> > MODULE_DEVICE_TABLE(of, imx_mu_dt_ids);
> > --
> > 2.7.4
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@...ts.infradead.org
> > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists
> > .infradead.org%2Fmailman%2Flistinfo%2Flinux-arm-kernel&data=02%7C
> 0
> >
> 1%7Chongxing.zhu%40nxp.com%7C21018279263a437e93c408d714001caf%7C
> 686ea1
> >
> d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C636999863030173002&sdat
> a=rAkj
> > 55SuJCjGN8ZC0ylLhGDHLeZlEQX9HvPxbjYqND4%3D&reserved=0
> >
>
> --
> Pengutronix e.K. |
> |
> Industrial Linux Solutions |
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pen
> gutronix.de%2F&data=02%7C01%7Chongxing.zhu%40nxp.com%7C210182
> 79263a437e93c408d714001caf%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0
> %7C0%7C636999863030182999&sdata=PKBRJCM1Gd8Fv1ogzuLD7MrT%2
> FROpbk4Ezzk3KSxKnF0%3D&reserved=0 |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax:
> +49-5121-206917-5555 |
Powered by blists - more mailing lists